3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F413RHT6
STMicroelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
STM32F413RHT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup power supply input for the RTC and backup registers. |
| 2 | PC13-ANTI_TAMP | bidirectional | 5 V tolerant I/O powered through the power switch, limited to 3 mA sink and 2 MHz with 30 pF output use, also TAMP_1 function. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant I/O powered through the power switch, limited to 3 mA sink and 2 MHz with 30 pF output use, also OSC32_IN oscillator pin. |
| 4 | PC15-OSC32_OUT | bidirectional | 5 V tolerant I/O powered through the power switch, limited to 3 mA sink and 2 MHz with 30 pF output use, also OSC32_OUT oscillator pin. |
| 5 | PH0-OSC_IN | bidirectional | 5 V tolerant pin in I/O mode, serving as OSC_IN for the HSE 4-26 MHz crystal in oscillator mode. |
| 6 | PH1-OSC_OUT | bidirectional | 5 V tolerant pin in I/O mode, serving as OSC_OUT for the HSE 4-26 MHz crystal in oscillator mode. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | 5 V tolerant I/O with LPTIM1_IN1, DFSDM2_CKIN4, SAI1_MCLK_B and ADC1_IN10 analog input, also WKUP2. |
| 9 | PC1 | bidirectional | 5 V tolerant I/O with LPTIM1_OUT, DFSDM2_DATIN4, SAI1_SD_B and ADC1_IN11 analog input, also WKUP3. |
| 10 | PC2 | bidirectional | 5 V tolerant I/O with SPI2_MISO, I2S2ext_SD, SAI1_SCK_B, FSMC_NWE and ADC1_IN12 analog input. |
| 11 | PC3 | bidirectional | 5 V tolerant I/O with LPTIM1_ETR, SPI2_MOSI/I2S2_SD, SAI1_FS_B, FSMC_A0 and ADC1_IN13 analog input. |
| 12 | VSSA | power_in | Analog ground pin, labelled VSSA/VREF- on the LQFP64 package. |
| 13 | VDDA | power_in | Analog power supply pin, labelled VDDA/VREF+ on the LQFP64 package. |
| 14 | PA0 | bidirectional | 5 V tolerant I/O with TIM2_CH1/TIM2_ETR, TIM5_CH1, USART2_CTS, UART4_TX and ADC1_IN0 analog input, also WKUP1. |
| 15 | PA1 | bidirectional | 5 V tolerant I/O with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3 and ADC1_IN1 analog input. |
| 16 | PA2 | bidirectional | 5 V tolerant I/O with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, FSMC_D4 and ADC1_IN2 analog input. |
| 17 | PA3 | bidirectional | 5 V tolerant I/O with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, FSMC_D5 and ADC1_IN3 analog input. |
| 18 | VSS | power_in | Ground pin for the digital core and I/Os. |
| 19 | VDD | power_in | Main 1.7 to 3.6 V application supply and I/O supply pin. |
| 20 | PA4 | bidirectional | 3.3 V tolerant TTa I/O directly connected to DAC, with SPI1_NSS/I2S1_WS, USART2_CK, FSMC_D6 and ADC1_IN4 analog input, DAC_OUT1. |
| 21 | PA5 | bidirectional | 3.3 V tolerant TTa I/O directly connected to DAC, with TIM2_CH1/TIM2_ETR, SPI1_SCK/I2S1_CK, FSMC_D7 and ADC1_IN5 analog input, DAC_OUT2. |
| 22 | PA6 | bidirectional | 5 V tolerant I/O with TIM1_BKIN, TIM3_CH1, SPI1_MISO, I2S2_MCK, TIM13_CH1, SDIO_CMD and ADC1_IN6 analog input. |
| 23 | PA7 | bidirectional | 5 V tolerant I/O with TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SD, TIM14_CH1, QUADSPI_BK2_IO1 and ADC1_IN7 analog input. |
| 24 | PC4 | bidirectional | 5 V tolerant I/O with DFSDM2_CKIN2, I2S1_MCK, QUADSPI_BK2_IO2, FSMC_NE4 and ADC1_IN14 analog input. |
| 25 | PC5 | bidirectional | 5 V tolerant I/O with DFSDM2_DATIN2, I2CFMP1_SMBA, USART3_RX, QUADSPI_BK2_IO3, FSMC_NOE and ADC1_IN15 analog input. |
| 26 | PB0 | bidirectional | 5 V tolerant I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, SPI5_SCK/I2S5_CK and ADC1_IN8 analog input. |
| 27 | PB1 | bidirectional | 5 V tolerant I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, SPI5_NSS/I2S5_WS, DFSDM1_DATIN0, QUADSPI_CLK and ADC1_IN9 analog input. |
| 28 | PB2 | bidirectional | 5 V tolerant I/O with LPTIM1_OUT, DFSDM1_CKIN0 and QUADSPI_CLK, also BOOT1. |
| 29 | PB10 | bidirectional | 5 V tolerant I/O with FTf (I2C FM+ option), with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, I2CFMP1_SCL and SDIO_D7. |
| 30 | VCAP_1 | passive | Connection for the external VCAP_1 capacitor of the internal voltage regulator. |
| 31 | VSS | power_in | Ground pin for the digital core and I/Os. |
| 32 | VDD | power_in | Main 1.7 to 3.6 V application supply and I/O supply pin. |
| 33 | PB12 | bidirectional | 5 V tolerant I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, DFSDM1_DATIN1 and FSMC_D13. |
| 34 | PB13 | bidirectional | 5 V tolerant I/O with TIM1_CH1N, I2CFMP1_SMBA, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, DFSDM1_CKIN1 and UART5_TX. |
| 35 | PB14 | bidirectional | 5 V tolerant I/O with FTf (I2C FM+ option), with TIM1_CH2N, TIM8_CH2N, I2CFMP1_SDA, SPI2_MISO, USART3_RTS and FSMC_D0. |
| 36 | PB15 | bidirectional | 5 V tolerant I/O with FTf (I2C FM+ option), with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, I2CFMP1_SCL, SPI2_MOSI/I2S2_SD and SDIO_CK. |
| 37 | PC6 | bidirectional | 5 V tolerant I/O with FTf (I2C FM+ option), with TIM3_CH1, TIM8_CH1, I2CFMP1_SCL, I2S2_MCK, USART6_TX, FSMC_D1 and SDIO_D6. |
| 38 | PC7 | bidirectional | 5 V tolerant I/O with FTf (I2C FM+ option), with TIM3_CH2, TIM8_CH2, I2CFMP1_SDA, SPI2_SCK/I2S2_CK, USART6_RX and SDIO_D7. |
| 39 | PC8 | bidirectional | 5 V tolerant I/O with TIM3_CH3, TIM8_CH3, USART6_CK, QUADSPI_BK1_IO2 and SDIO_D0. |
| 40 | PC9 | bidirectional | 5 V tolerant I/O with MCO_2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S2_CKIN, QUADSPI_BK1_IO0 and SDIO_D1. |
| 41 | PA8 | bidirectional | 5 V tolerant I/O with MCO_1, TIM1_CH1, I2C3_SCL, DFSDM1_CKOUT, USART1_CK, UART7_RX, USB_FS_SOF and CAN3_RX. |
| 42 | PA9 | bidirectional | 5 V tolerant I/O with TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, USB_FS_VBUS and SDIO_D2. |
| 43 | PA10 | bidirectional | 5 V tolerant I/O with TIM1_CH3, SPI2_MOSI/I2S2_SD, SPI5_MOSI/I2S5_SD, USART1_RX and USB_FS_ID. |
| 44 | PA11 | bidirectional | 5 V tolerant I/O with TIM1_CH4, SPI2_NSS/I2S2_WS, SPI4_MISO, USART1_CTS, USART6_TX, CAN1_RX, USB_FS_DM and UART4_RX. |
| 45 | PA12 | bidirectional | 5 V tolerant I/O with TIM1_ETR, SPI2_MISO, SPI5_MISO, USART1_RTS, USART6_RX, CAN1_TX, USB_FS_DP and UART4_TX. |
| 46 | PA13 | bidirectional | 5 V tolerant I/O with JTMS-SWDIO function of the serial wire debug port. |
| 47 | VSS | power_in | Ground pin for the digital core and I/Os. |
| 48 | VDD | power_in | Main 1.7 to 3.6 V application supply and I/O supply pin. |
| 49 | PA14 | bidirectional | 5 V tolerant I/O with JTCK-SWCLK function of the serial wire debug port. |
| 50 | PA15 | bidirectional | 5 V tolerant I/O with JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, UART7_TX, SAI1_MCLK_A and CAN3_TX. |
| 51 | PC10 | bidirectional | 5 V tolerant I/O with DFSDM2_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, QUADSPI_BK1_IO1 and SDIO_D2. |
| 52 | PC11 | bidirectional | 5 V tolerant I/O with DFSDM2_DATIN5, I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, FSMC_D2 and SDIO_D3. |
| 53 | PC12 | bidirectional | 5 V tolerant I/O with SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, FSMC_D3 and SDIO_CK. |
| 54 | PD2 | bidirectional | 5 V tolerant I/O with TIM3_ETR, DFSDM2_CKOUT, UART5_RX, FSMC_NWE and SDIO_CMD. |
| 55 | PB3 | bidirectional | 5 V tolerant I/O with FTf (I2C FM+ option), with JTDO-SWO, TIM2_CH2, I2CFMP1_SDA, SPI1_SCK/I2S1_CK, USART1_RX and I2C2_SDA. |
| 56 | PB4 | bidirectional | 5 V tolerant I/O with JTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, UART7_TX, I2C3_SDA, CAN3_TX and SDIO_D0. |
| 57 | PB5 | bidirectional | 5 V tolerant I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, CAN2_RX, UART5_RX and SDIO_D3. |
| 58 | PB6 | bidirectional | 5 V tolerant I/O with LPTIM1_ETR, TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, UART5_TX and SDIO_D0. |
| 59 | PB7 | bidirectional | 5 V tolerant I/O with LPTIM1_IN2, TIM4_CH2, I2C1_SDA, USART1_RX and FSMC_NL. |
| 60 | BOOT0 | input | Dedicated BOOT0 pin used to select the boot mode, also serving as VPP. |
| 61 | PB8 | bidirectional | 5 V tolerant I/O with LPTIM1_OUT, TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI/I2S5_SD, CAN1_RX, I2C3_SDA, UART5_RX and SDIO_D4. |
| 62 | PB9 | bidirectional | 5 V tolerant I/O with FTf (I2C FM+ option), with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, I2C2_SDA, UART5_TX and SDIO_D5. |
| 63 | VSS | power_in | Ground pin for the digital core and I/Os. |
| 64 | VDD | power_in | Main 1.7 to 3.6 V application supply and I/O supply pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD, VDDUSB and VBAT) | VDD-VSS | -0.3 | 4 | V | 79 | ||
| Input voltage on any other pin | VIN | 4 | V | Input voltage on any other pin (min printed as VSS-0.3) | 79 | ||
| Input voltage on TTa pins | VIN | 4 | V | Input voltage on TTa pins (min printed as VSS-0.3) | 79 | ||
| Input voltage for BOOT0 | VIN | 0 | 9 | V | Input voltage for BOOT0 | 79 | |
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 79 | |||
| Variations between all the different ground pins including VREF- | /VSSX −VSS/ | 50 | mV | 79 | |||
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | 180 | mA | 80 | |||
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | -180 | mA | 80 | |||
| Total current into VDDUSB power lines (source) | ΣIVDDUSB | 25 | mA | 80 | |||
| Maximum current into each VDD_x power line (source) | IVDD | 100 | mA | 80 | |||
| Maximum current out of each VSS_x ground line (sink) | IVSS | -100 | mA | 80 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 80 | |||
| Output current sourced by any I/O and control pin | IIO | -25 | mA | 80 | |||
| Total output current sunk by sum of all I/O and control pins | ΣIIO | 120 | mA | 80 | |||
| Total output current sourced by sum of all I/Os and control pins | ΣIIO | -120 | mA | 80 | |||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 80 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 80 | ||
| Maximum junction temperature | TJ | 125 | °C | 80 | |||
| Internal AHB clock frequency | fHCLK | 0 | 64 | MHz | Power Scale3: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x01 | 81 | |
| Internal AHB clock frequency | fHCLK | 0 | 84 | MHz | Power Scale2: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x10 | 81 | |
| Internal AHB clock frequency | fHCLK | 0 | 100 | MHz | Power Scale1: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x11 | 81 | |
| Internal APB1 clock frequency | fPCLK1 | 0 | 50 | MHz | 81 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 100 | MHz | 81 | ||
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 81 | ||
| Analog operating voltage (ADC limited to 1.2 M samples) | VDDA | 1.7 | 2.4 | V | Must be the same potential as VDD | 81 | |
| Analog operating voltage (ADC limited to 2.4 M samples) | VDDA | 2.4 | 3.6 | V | Must be the same potential as VDD | 81 | |
| USB supply voltage (USB not used) | VDDUSB | 1.7 | 3.3 | 3.6 | V | USB not used; supply voltage for PA11 and PA12 pins | 81 |
| USB supply voltage (USB used) | VDDUSB | 3 | 3.6 | V | USB used; supply voltage for PA11 and PA12 pins | 81 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 81 | ||
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins | V12 | 1.08 | 1.14 | 1.2 | V | VOS[1:0] bits in PWR_CR register = 0x01; max frequency 64 MHz | 81 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins | V12 | 1.2 | 1.26 | 1.32 | V | VOS[1:0] bits in PWR_CR register = 0x10; max frequency 84 MHz | 81 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins | V12 | 1.26 | 1.32 | 1.38 | V | VOS[1:0] bits in PWR_CR register = 0x11; max frequency 100 MHz | 81 |
| Regulator OFF: 1.2 V external voltage on VCAP_1/VCAP_2 pins | V12 | 1.1 | 1.14 | 1.2 | V | Max frequency 64 MHz | 81 |
| Regulator OFF: 1.2 V external voltage on VCAP_1/VCAP_2 pins | V12 | 1.2 | 1.26 | 1.32 | V | Max frequency 84 MHz | 81 |
| Regulator OFF: 1.2 V external voltage on VCAP_1/VCAP_2 pins | V12 | 1.26 | 1.32 | 1.38 | V | Max frequency 100 MHz | 81 |
| Input voltage on RST, FT and TC pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 82 | |
| Input voltage on RST, FT and TC pins | VIN | -0.3 | 5.2 | V | VDD ≤ 2 V | 82 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 82 | ||
| Ambient temperature for range 6 (maximum power dissipation) | TA | -40 | 85 | °C | Range 6, maximum power dissipation | 82 | |
| Ambient temperature for range 7 (maximum power dissipation) | TA | -40 | 105 | °C | Range 7, maximum power dissipation | 82 | |
| Ambient temperature for range 3 (maximum power dissipation) | TA | -40 | 125 | °C | Range 3, maximum power dissipation | 82 | |
| Junction temperature range | TJ | -40 | 105 | °C | Range 6 | 82 | |
| Junction temperature range | TJ | -40 | 125 | °C | Range 7 | 82 | |
| Junction temperature range | TJ | -40 | 130 | °C | Range 3 | 82 | |
| VDD rise time rate (regulator ON) | tVDD | 20 | µs/V | Power-up/power-down; VDD rise time rate | 84 | ||
| Power-on/power-down reset threshold (falling edge) | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 85 |
| Power-on/power-down reset threshold (rising edge) | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 85 |
| PDR hysteresis | VPDRhyst | 40 | mV | 85 | |||
| PVD hysteresis | VPVDhyst | 100 | mV | 85 | |||
| Brownout level 1 threshold (falling edge) | VBOR1 | 2.13 | 2.19 | 2.24 | V | Falling edge | 86 |
| Brownout level 1 threshold (rising edge) | VBOR1 | 2.23 | 2.29 | 2.33 | V | Rising edge | 86 |
| BOR hysteresis | VBORhyst | 100 | mV | 86 | |||
| POR reset timing | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | 86 | |
| Supply current in Run mode, external clock, PLL ON, all peripherals enabled, ART accelerator disabled, running from SRAM, VDD = 3.6 V, fHCLK 100 MHz | IDD | 33.3 | 35.32 | mA | TA = 25 °C; fHCLK 100 MHz; VDD = 3.6 V | 88 | |
| Supply current in Run mode, external clock, PLL ON, all peripherals enabled, ART accelerator disabled, running from SRAM, VDD = 3.6 V, fHCLK 100 MHz | IDD | 41.26 | mA | TA = 125 °C; fHCLK 100 MHz; VDD = 3.6 V | 88 | ||
| Supply current in Run mode, external clock, PLL ON, all peripherals enabled, ART accelerator disabled, running from Flash, VDD = 3.6 V, fHCLK 100 MHz | IDD | 39.9 | 42.46 | mA | TA = 25 °C; fHCLK 100 MHz; VDD = 3.6 V | 91 | |
| Supply current in Run mode, external clock, PLL ON, all peripherals enabled, ART accelerator disabled, running from Flash, VDD = 3.6 V, fHCLK 100 MHz | IDD | 49.19 | mA | TA = 125 °C; fHCLK 100 MHz; VDD = 3.6 V | 91 | ||
| Typical and maximum Stop mode supply current, Flash in Stop mode, all oscillators OFF, low power regulator usage, VDD = 3.6 V | IDD_STOP | 44.1 | 82.5 | µA | TA = 25 °C; no independent watchdog | 97 | |
| Typical and maximum Standby mode supply current, RTC and LSE OFF, VDD = 1.7 V | IDD_STBY | 1.1 | 2.5 | µA | TA = 25 °C | 97 | |
| Typical and maximum Standby mode supply current, RTC and LSE OFF, VDD = 3.6 V | IDD_STBY | 2.5 | 4 | µA | TA = 25 °C | 98 | |
| Typical and maximum Standby mode supply current, RTC and LSE OFF, VDD = 3.6 V | IDD_STBY | 19.4 | µA | TA = 85 °C | 98 | ||
| Typical and maximum Standby mode supply current, RTC and LSE OFF, VDD = 3.6 V | IDD_STBY | 81.5 | µA | TA = 125 °C | 98 | ||
| Backup domain supply current, LSE low-drive mode and RTC ON | IDD_VBAT | 10 | µA | VBAT = 3.6 V; TA = 125 °C | 98 | ||
| LSI oscillator frequency | fLSI | 16.1 | 32 | 47 | kHz | VDD = 3 V, TA = -40 to 125 °C | 112 |
| LSI oscillator startup time | tsu(LSI) | 15 | 40 | µs | 112 | ||
| LSI oscillator power consumption | IDD(LSI) | 0.4 | 0.6 | µA | 112 |
CAD (KiCad official)
- Symbol:
STM32F413RHT6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32f413rht6-etched.step/stm32f413rht6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f413rht6.step/stm32f413rht6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (203 pp, sha256
4157ab59cb88ac0f, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).