main
Ray
Publish 0.1.0
c36923a
STM32F413CGU6
STMicroelectronics · ST Microelectronics · UFQFPN-48(7x7)
STM32F413CGU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup supply pin for the RTC and backup domain. |
| 2 | PC13-ANTI_TAMP | bidirectional | 5 V-tolerant I/O supplied through the power switch (3 mA max sink), so output mode is limited to 2 MHz with 30 pF max load and it must not source current; additional function TAMP_1. |
| 3 | PC14-OSC32_IN | bidirectional | GPIO supplied through the power switch (output limited to 2 MHz, 30 pF max); additional function OSC32_IN for the 32 kHz oscillator, and not 5 V tolerant in oscillator mode. |
| 4 | PC15-OSC32_OUT | bidirectional | GPIO supplied through the power switch (output limited to 2 MHz, 30 pF max); additional function OSC32_OUT for the 32 kHz oscillator, and not 5 V tolerant in oscillator mode. |
| 5 | PH0-OSC_IN | bidirectional | GPIO that is also the OSC_IN input of the 4-26 MHz crystal oscillator; not 5 V tolerant in oscillator mode. |
| 6 | PH1-OSC_OUT | bidirectional | GPIO that is also the OSC_OUT output of the 4-26 MHz crystal oscillator; not 5 V tolerant in oscillator mode. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | VSSA/VREF- | power_in | Analog ground (VSSA) supply pin. |
| 9 | VDDA/VREF+ | power_in | Analog supply (VDDA) pin, which also serves as the ADC/DAC positive reference VREF+ on this package. |
| 10 | PA0 | bidirectional | 5 V-tolerant I/O with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS and UART4_TX alternates; additional functions ADC1_IN0 and WKUP1. |
| 11 | PA1 | bidirectional | 5 V-tolerant I/O with TIM2_CH2, TIM5_CH2, SPI4_MOSI/I2S4_SD, USART2_RTS, UART4_RX and QUADSPI_BK1_IO3 alternates; additional function ADC1_IN1. |
| 12 | PA2 | bidirectional | 5 V-tolerant I/O with TIM2_CH3, TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX and FSMC_D4/DA4 alternates; additional function ADC1_IN2. |
| 13 | PA3 | bidirectional | 5 V-tolerant I/O with TIM2_CH4, TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX, SAI1_SD_B and FSMC_D5/DA5 alternates; additional function ADC1_IN3. |
| 14 | PA4 | bidirectional | 3.3 V-tolerant (TTa) I/O with SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, DFSDM1_DATIN1 and FSMC_D6/DA6 alternates; additional functions ADC1_IN4 and DAC_OUT1. |
| 15 | PA5 | bidirectional | 3.3 V-tolerant (TTa) I/O with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, DFSDM1_CKIN1 and FSMC_D7/DA7 alternates; additional functions ADC1_IN5 and DAC_OUT2. |
| 16 | PA6 | bidirectional | 5 V-tolerant I/O with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, I2S2_MCK, TIM13_CH1, QUADSPI_BK2_IO0 and SDIO_CMD alternates; additional function ADC1_IN6. |
| 17 | PA7 | bidirectional | 5 V-tolerant I/O with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, TIM14_CH1 and QUADSPI_BK2_IO1 alternates; additional function ADC1_IN7. |
| 18 | PB0 | bidirectional | 5 V-tolerant I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N and SPI5_SCK/I2S5_CK alternates; additional function ADC1_IN8. |
| 19 | PB1 | bidirectional | 5 V-tolerant I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, SPI5_NSS/I2S5_WS, DFSDM1_DATIN0 and QUADSPI_CLK alternates; additional function ADC1_IN9. |
| 20 | PB2 | bidirectional | 5 V-tolerant I/O with LPTIM1_OUT, DFSDM1_CKIN0 and QUADSPI_CLK alternates; additional function BOOT1. |
| 21 | PB10 | bidirectional | 5 V-tolerant I/O (FTf, I2C FM+ option) with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, I2CFMP1_SCL, DFSDM2_CKOUT and SDIO_D7 alternates. |
| 22 | VCAP_1 | passive | Supply pin for connecting the external VCAP_1 capacitor of the internal 1.2 V regulator. |
| 23 | VSS | power_in | Digital ground supply pin. |
| 24 | VDD | power_in | Digital supply pin (1.7 to 3.6 V application supply). |
| 25 | PB12 | bidirectional | 5 V-tolerant I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, SPI4_NSS, SPI3_SCK/I2S3_CK, USART3_CK, CAN2_RX, DFSDM1_DATIN1, UART5_RX and FSMC_D13/DA13 alternates. |
| 26 | PB13 | bidirectional | 5 V-tolerant I/O with TIM1_CH1N, I2CFMP1_SMBA, SPI2_SCK/I2S2_CK, SPI4_SCK/I2S4_CK, USART3_CTS, CAN2_TX, DFSDM1_CKIN1 and UART5_TX alternates. |
| 27 | PB14 | bidirectional | 5 V-tolerant I/O (FTf, I2C FM+ option) with TIM1_CH2N, TIM8_CH2N, I2CFMP1_SDA, SPI2_MISO, USART3_RTS, TIM12_CH1, FSMC_D0/DA0 and SDIO_D6 alternates. |
| 28 | PB15 | bidirectional | 5 V-tolerant I/O (FTf, I2C FM+ option) with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, I2CFMP1_SCL, SPI2_MOSI/I2S2_SD, TIM12_CH2 and SDIO_CK alternates. |
| 29 | PA8 | bidirectional | 5 V-tolerant I/O with MCO_1, TIM1_CH1, I2C3_SCL, USART1_CK, UART7_RX, USB_FS_SOF, CAN3_RX and SDIO_D1 alternates. |
| 30 | PA9 | bidirectional | 5 V-tolerant I/O with TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, USB_FS_VBUS and SDIO_D2 alternates. |
| 31 | PA10 | bidirectional | 5 V-tolerant I/O with TIM1_CH3, SPI2_MOSI/I2S2_SD, SPI5_MOSI/I2S5_SD, USART1_RX and USB_FS_ID alternates. |
| 32 | PA11 | bidirectional | 5 V-tolerant I/O with TIM1_CH4, SPI2_NSS/I2S2_WS, USART1_CTS, USART6_TX, CAN1_RX, USB_FS_DM and UART4_RX alternates. |
| 33 | PA12 | bidirectional | 5 V-tolerant I/O with TIM1_ETR, SPI2_MISO, USART1_RTS, USART6_RX, CAN1_TX, USB_FS_DP and UART4_TX alternates. |
| 34 | PA13 | bidirectional | 5 V-tolerant I/O whose function after reset is JTMS-SWDIO. |
| 35 | VSS | power_in | Digital ground supply pin. |
| 36 | VDD | power_in | Digital supply pin (1.7 to 3.6 V application supply). |
| 37 | PA14 | bidirectional | 5 V-tolerant I/O whose function after reset is JTCK-SWCLK. |
| 38 | PA15 | bidirectional | 5 V-tolerant I/O whose function after reset is JTDI, with TIM2_CH1/ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, UART7_TX, SAI1_MCLK_A and CAN3_TX alternates. |
| 39 | PB3 | bidirectional | 5 V-tolerant I/O (FTf) whose function after reset is JTDO-SWO, with TIM2_CH2, I2CFMP1_SDA, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, USART1_RX, UART7_RX, I2C2_SDA, SAI1_SD_A and CAN3_RX alternates. |
| 40 | PB4 | bidirectional | 5 V-tolerant I/O whose function after reset is JTRST, with TIM3_CH1, SPI1_MISO, SPI3_MISO, UART7_TX, I2C3_SDA, SAI1_SCK_A, CAN3_TX and SDIO_D0 alternates. |
| 41 | PB5 | bidirectional | 5 V-tolerant I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, CAN2_RX, SAI1_FS_A, UART5_RX and SDIO_D3 alternates. |
| 42 | PB6 | bidirectional | 5 V-tolerant I/O with LPTIM1_ETR, TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, UART5_TX and SDIO_D0 alternates. |
| 43 | PB7 | bidirectional | 5 V-tolerant I/O with LPTIM1_IN2, TIM4_CH2, I2C1_SDA, USART1_RX and FSMC_NL alternates. |
| 44 | BOOT0 | input | Dedicated boot mode selection input; additional function VPP. |
| 45 | PB8 | bidirectional | 5 V-tolerant I/O with LPTIM1_OUT, TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI/I2S5_SD, CAN1_RX, I2C3_SDA, UART5_RX and SDIO_D4 alternates. |
| 46 | PB9 | bidirectional | 5 V-tolerant I/O with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, I2C2_SDA, UART5_TX and SDIO_D5 alternates. |
| 47 | VSS | power_in | Digital ground supply pin. |
| 48 | VDD | power_in | Digital supply pin (1.7 to 3.6 V application supply). |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD, VDDUSB and VBAT) | VDD-VSS | -0.3 | 4 | V | 79 | ||
| Input voltage on TTa pins | VIN | 4 | V | 79 | |||
| Input voltage on any other pin | VIN | 4 | V | 79 | |||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 79 | |||
| Variations between all the different ground pins including VREF- | /VSSX −VSS/ | 50 | mV | 79 | |||
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | 180 | mA | 80 | |||
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | -180 | mA | 80 | |||
| Total current into VDDUSB power lines (source) | ΣIVDDUSB | 25 | mA | 80 | |||
| Maximum current into each VDD_x power line (source) | IVDD | 100 | mA | 80 | |||
| Maximum current out of each VSS_x ground line (sink) | IVSS | -100 | mA | 80 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 80 | |||
| Output current sourced by any I/O and control pin | IIO | -25 | mA | 80 | |||
| Total output current sunk by sum of all I/O and control pins | ΣIIO | 120 | mA | 80 | |||
| Total output current sunk by sum of all USB I/Os | 25 | mA | 80 | ||||
| Total output current sourced by sum of all I/Os and control pins | ΣIIO | -120 | mA | 80 | |||
| Injected current on FT and TC pins | IINJ(PIN) | -5 | 0 | mA | 80 | ||
| Injected current on TTa pins | IINJ(PIN) | -5 | 5 | mA | 80 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 80 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 80 | ||
| Maximum junction temperature | TJ | 125 | °C | 80 | |||
| Internal AHB clock frequency | fHCLK | 0 | 64 | MHz | Power Scale3: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x01 | 81 | |
| Internal AHB clock frequency | fHCLK | 0 | 84 | MHz | Power Scale2: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x10 | 81 | |
| Internal AHB clock frequency | fHCLK | 0 | 100 | MHz | Power Scale1: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x11 | 81 | |
| Internal APB1 clock frequency | fPCLK1 | 0 | 50 | MHz | 81 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 100 | MHz | 81 | ||
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 81 | ||
| Analog operating voltage (ADC limited to 1.2 M samples) | VDDA | 1.7 | 2.4 | V | ADC limited to 1.2 M samples; must be the same potential as VDD | 81 | |
| Analog operating voltage (ADC limited to 2.4 M samples) | VDDA | 2.4 | 3.6 | V | ADC limited to 2.4 M samples | 81 | |
| USB supply voltage (supply voltage for PA11 and PA12 pins) | VDDUSB | 1.7 | 3.3 | 3.6 | V | USB not used | 81 |
| USB supply voltage (supply voltage for PA11 and PA12 pins) | VDDUSB | 3 | 3.6 | V | USB used | 81 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 81 | ||
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins | V12 | 1.08 | 1.14 | 1.2 | V | VOS[1:0] bits in PWR_CR register = 0x01; max frequency 64 MHz | 81 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins | V12 | 1.2 | 1.26 | 1.32 | V | VOS[1:0] bits in PWR_CR register = 0x10; max frequency 84 MHz | 81 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins | V12 | 1.26 | 1.32 | 1.38 | V | VOS[1:0] bits in PWR_CR register = 0x11; max frequency 100 MHz | 81 |
| Input voltage on RST, FT and TC pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 82 | |
| Input voltage on RST, FT and TC pins | VIN | -0.3 | 5.2 | V | VDD ≤ 2 V | 82 | |
| Input voltage on TTa pins | VIN | -0.3 | V | 82 | |||
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 82 | ||
| Power dissipation at TA = 85 °C for range 6 (UFQFPN48) | PD | 625 | mW | TA = 85 °C for range 6 (maximum power dissipation) | 82 | ||
| Ambient temperature for range 6, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation | 82 | |
| Ambient temperature for range 6, low power dissipation | TA | -40 | 105 | °C | Low power dissipation | 82 | |
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | Range 6 | 82 | |
| VDD rise time rate | tVDD | 20 | µs/V | Regulator ON, power-up | 84 | ||
| VDD fall time rate | tVDD | 20 | µs/V | Regulator ON, power-down | 84 | ||
| ESR of external capacitor with a single VCAP pin available | ESR | 1 | Ω | Single VCAP pin available | 84 | ||
| Power-on/power-down reset threshold (falling edge) | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 85 |
| Power-on/power-down reset threshold (rising edge) | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 85 |
| PDR hysteresis | VPDRhyst | 40 | mV | 85 | |||
| PVD hysteresis | VPVDhyst | 100 | mV | 85 | |||
| BOR hysteresis | VBORhyst | 100 | mV | 86 | |||
| POR reset timing | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | 86 | |
| In-Rush energy on voltage regulator power-on (POR or wakeup from Standby) | ERUSH | 5.4 | µC | VDD = 1.7 V, TA = 125 °C, IRUSH = 171 mA for 31 µs | 86 | ||
| LSI frequency | fLSI | 16.1 | 32 | 47 | kHz | VDD = 3 V, TA = -40 to 125 °C | 112 |
| LSI oscillator startup time | tsu(LSI) | 15 | 40 | µs | 112 | ||
| LSI oscillator power consumption | IDD(LSI) | 0.4 | 0.6 | µA | 112 | ||
| Capacitance of external capacitor with a single VCAP pin available | CEXT | 4.7 | µF | Single VCAP pin available | 84 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32F413CGU6 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: UFQFPN-48(7x7), generated on the KiCad land (body 7 x 7 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32f413cgu6-etched.step/stm32f413cgu6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f413cgu6.step/stm32f413cgu6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (203 pp, sha256
4157ab59cb88ac0f, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# STM32F413CGU6
**STMicroelectronics** · ST Microelectronics · UFQFPN-48(7x7)
STM32F413CGU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup supply pin for the RTC and backup domain. |
| 2 | PC13-ANTI_TAMP | bidirectional | 5 V-tolerant I/O supplied through the power switch (3 mA max sink), so output mode is limited to 2 MHz with 30 pF max load and it must not source current; additional function TAMP_1. |
| 3 | PC14-OSC32_IN | bidirectional | GPIO supplied through the power switch (output limited to 2 MHz, 30 pF max); additional function OSC32_IN for the 32 kHz oscillator, and not 5 V tolerant in oscillator mode. |
| 4 | PC15-OSC32_OUT | bidirectional | GPIO supplied through the power switch (output limited to 2 MHz, 30 pF max); additional function OSC32_OUT for the 32 kHz oscillator, and not 5 V tolerant in oscillator mode. |
| 5 | PH0-OSC_IN | bidirectional | GPIO that is also the OSC_IN input of the 4-26 MHz crystal oscillator; not 5 V tolerant in oscillator mode. |
| 6 | PH1-OSC_OUT | bidirectional | GPIO that is also the OSC_OUT output of the 4-26 MHz crystal oscillator; not 5 V tolerant in oscillator mode. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | VSSA/VREF- | power_in | Analog ground (VSSA) supply pin. |
| 9 | VDDA/VREF+ | power_in | Analog supply (VDDA) pin, which also serves as the ADC/DAC positive reference VREF+ on this package. |
| 10 | PA0 | bidirectional | 5 V-tolerant I/O with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS and UART4_TX alternates; additional functions ADC1_IN0 and WKUP1. |
| 11 | PA1 | bidirectional | 5 V-tolerant I/O with TIM2_CH2, TIM5_CH2, SPI4_MOSI/I2S4_SD, USART2_RTS, UART4_RX and QUADSPI_BK1_IO3 alternates; additional function ADC1_IN1. |
| 12 | PA2 | bidirectional | 5 V-tolerant I/O with TIM2_CH3, TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX and FSMC_D4/DA4 alternates; additional function ADC1_IN2. |
| 13 | PA3 | bidirectional | 5 V-tolerant I/O with TIM2_CH4, TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX, SAI1_SD_B and FSMC_D5/DA5 alternates; additional function ADC1_IN3. |
| 14 | PA4 | bidirectional | 3.3 V-tolerant (TTa) I/O with SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, DFSDM1_DATIN1 and FSMC_D6/DA6 alternates; additional functions ADC1_IN4 and DAC_OUT1. |
| 15 | PA5 | bidirectional | 3.3 V-tolerant (TTa) I/O with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, DFSDM1_CKIN1 and FSMC_D7/DA7 alternates; additional functions ADC1_IN5 and DAC_OUT2. |
| 16 | PA6 | bidirectional | 5 V-tolerant I/O with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, I2S2_MCK, TIM13_CH1, QUADSPI_BK2_IO0 and SDIO_CMD alternates; additional function ADC1_IN6. |
| 17 | PA7 | bidirectional | 5 V-tolerant I/O with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, TIM14_CH1 and QUADSPI_BK2_IO1 alternates; additional function ADC1_IN7. |
| 18 | PB0 | bidirectional | 5 V-tolerant I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N and SPI5_SCK/I2S5_CK alternates; additional function ADC1_IN8. |
| 19 | PB1 | bidirectional | 5 V-tolerant I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, SPI5_NSS/I2S5_WS, DFSDM1_DATIN0 and QUADSPI_CLK alternates; additional function ADC1_IN9. |
| 20 | PB2 | bidirectional | 5 V-tolerant I/O with LPTIM1_OUT, DFSDM1_CKIN0 and QUADSPI_CLK alternates; additional function BOOT1. |
| 21 | PB10 | bidirectional | 5 V-tolerant I/O (FTf, I2C FM+ option) with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, I2CFMP1_SCL, DFSDM2_CKOUT and SDIO_D7 alternates. |
| 22 | VCAP_1 | passive | Supply pin for connecting the external VCAP_1 capacitor of the internal 1.2 V regulator. |
| 23 | VSS | power_in | Digital ground supply pin. |
| 24 | VDD | power_in | Digital supply pin (1.7 to 3.6 V application supply). |
| 25 | PB12 | bidirectional | 5 V-tolerant I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, SPI4_NSS, SPI3_SCK/I2S3_CK, USART3_CK, CAN2_RX, DFSDM1_DATIN1, UART5_RX and FSMC_D13/DA13 alternates. |
| 26 | PB13 | bidirectional | 5 V-tolerant I/O with TIM1_CH1N, I2CFMP1_SMBA, SPI2_SCK/I2S2_CK, SPI4_SCK/I2S4_CK, USART3_CTS, CAN2_TX, DFSDM1_CKIN1 and UART5_TX alternates. |
| 27 | PB14 | bidirectional | 5 V-tolerant I/O (FTf, I2C FM+ option) with TIM1_CH2N, TIM8_CH2N, I2CFMP1_SDA, SPI2_MISO, USART3_RTS, TIM12_CH1, FSMC_D0/DA0 and SDIO_D6 alternates. |
| 28 | PB15 | bidirectional | 5 V-tolerant I/O (FTf, I2C FM+ option) with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, I2CFMP1_SCL, SPI2_MOSI/I2S2_SD, TIM12_CH2 and SDIO_CK alternates. |
| 29 | PA8 | bidirectional | 5 V-tolerant I/O with MCO_1, TIM1_CH1, I2C3_SCL, USART1_CK, UART7_RX, USB_FS_SOF, CAN3_RX and SDIO_D1 alternates. |
| 30 | PA9 | bidirectional | 5 V-tolerant I/O with TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, USB_FS_VBUS and SDIO_D2 alternates. |
| 31 | PA10 | bidirectional | 5 V-tolerant I/O with TIM1_CH3, SPI2_MOSI/I2S2_SD, SPI5_MOSI/I2S5_SD, USART1_RX and USB_FS_ID alternates. |
| 32 | PA11 | bidirectional | 5 V-tolerant I/O with TIM1_CH4, SPI2_NSS/I2S2_WS, USART1_CTS, USART6_TX, CAN1_RX, USB_FS_DM and UART4_RX alternates. |
| 33 | PA12 | bidirectional | 5 V-tolerant I/O with TIM1_ETR, SPI2_MISO, USART1_RTS, USART6_RX, CAN1_TX, USB_FS_DP and UART4_TX alternates. |
| 34 | PA13 | bidirectional | 5 V-tolerant I/O whose function after reset is JTMS-SWDIO. |
| 35 | VSS | power_in | Digital ground supply pin. |
| 36 | VDD | power_in | Digital supply pin (1.7 to 3.6 V application supply). |
| 37 | PA14 | bidirectional | 5 V-tolerant I/O whose function after reset is JTCK-SWCLK. |
| 38 | PA15 | bidirectional | 5 V-tolerant I/O whose function after reset is JTDI, with TIM2_CH1/ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, UART7_TX, SAI1_MCLK_A and CAN3_TX alternates. |
| 39 | PB3 | bidirectional | 5 V-tolerant I/O (FTf) whose function after reset is JTDO-SWO, with TIM2_CH2, I2CFMP1_SDA, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, USART1_RX, UART7_RX, I2C2_SDA, SAI1_SD_A and CAN3_RX alternates. |
| 40 | PB4 | bidirectional | 5 V-tolerant I/O whose function after reset is JTRST, with TIM3_CH1, SPI1_MISO, SPI3_MISO, UART7_TX, I2C3_SDA, SAI1_SCK_A, CAN3_TX and SDIO_D0 alternates. |
| 41 | PB5 | bidirectional | 5 V-tolerant I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, CAN2_RX, SAI1_FS_A, UART5_RX and SDIO_D3 alternates. |
| 42 | PB6 | bidirectional | 5 V-tolerant I/O with LPTIM1_ETR, TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, UART5_TX and SDIO_D0 alternates. |
| 43 | PB7 | bidirectional | 5 V-tolerant I/O with LPTIM1_IN2, TIM4_CH2, I2C1_SDA, USART1_RX and FSMC_NL alternates. |
| 44 | BOOT0 | input | Dedicated boot mode selection input; additional function VPP. |
| 45 | PB8 | bidirectional | 5 V-tolerant I/O with LPTIM1_OUT, TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI/I2S5_SD, CAN1_RX, I2C3_SDA, UART5_RX and SDIO_D4 alternates. |
| 46 | PB9 | bidirectional | 5 V-tolerant I/O with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, I2C2_SDA, UART5_TX and SDIO_D5 alternates. |
| 47 | VSS | power_in | Digital ground supply pin. |
| 48 | VDD | power_in | Digital supply pin (1.7 to 3.6 V application supply). |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD, VDDUSB and VBAT) | VDD-VSS | -0.3 | | 4 | V | | 79 |
| Input voltage on TTa pins | VIN | | | 4 | V | | 79 |
| Input voltage on any other pin | VIN | | | 4 | V | | 79 |
| Variations between different VDD power pins | /ΔVDDx/ | | | 50 | mV | | 79 |
| Variations between all the different ground pins including VREF- | /VSSX −VSS/ | | | 50 | mV | | 79 |
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | | | 180 | mA | | 80 |
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | | | -180 | mA | | 80 |
| Total current into VDDUSB power lines (source) | ΣIVDDUSB | | | 25 | mA | | 80 |
| Maximum current into each VDD_x power line (source) | IVDD | | | 100 | mA | | 80 |
| Maximum current out of each VSS_x ground line (sink) | IVSS | | | -100 | mA | | 80 |
| Output current sunk by any I/O and control pin | IIO | | | 25 | mA | | 80 |
| Output current sourced by any I/O and control pin | IIO | | | -25 | mA | | 80 |
| Total output current sunk by sum of all I/O and control pins | ΣIIO | | | 120 | mA | | 80 |
| Total output current sunk by sum of all USB I/Os | | | | 25 | mA | | 80 |
| Total output current sourced by sum of all I/Os and control pins | ΣIIO | | | -120 | mA | | 80 |
| Injected current on FT and TC pins | IINJ(PIN) | -5 | | 0 | mA | | 80 |
| Injected current on TTa pins | IINJ(PIN) | -5 | | 5 | mA | | 80 |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | | 25 | mA | | 80 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 80 |
| Maximum junction temperature | TJ | | | 125 | °C | | 80 |
| Internal AHB clock frequency | fHCLK | 0 | | 64 | MHz | Power Scale3: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x01 | 81 |
| Internal AHB clock frequency | fHCLK | 0 | | 84 | MHz | Power Scale2: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x10 | 81 |
| Internal AHB clock frequency | fHCLK | 0 | | 100 | MHz | Power Scale1: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x11 | 81 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 50 | MHz | | 81 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 100 | MHz | | 81 |
| Standard operating voltage | VDD | 1.7 | | 3.6 | V | | 81 |
| Analog operating voltage (ADC limited to 1.2 M samples) | VDDA | 1.7 | | 2.4 | V | ADC limited to 1.2 M samples; must be the same potential as VDD | 81 |
| Analog operating voltage (ADC limited to 2.4 M samples) | VDDA | 2.4 | | 3.6 | V | ADC limited to 2.4 M samples | 81 |
| USB supply voltage (supply voltage for PA11 and PA12 pins) | VDDUSB | 1.7 | 3.3 | 3.6 | V | USB not used | 81 |
| USB supply voltage (supply voltage for PA11 and PA12 pins) | VDDUSB | 3 | | 3.6 | V | USB used | 81 |
| Backup operating voltage | VBAT | 1.65 | | 3.6 | V | | 81 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins | V12 | 1.08 | 1.14 | 1.2 | V | VOS[1:0] bits in PWR_CR register = 0x01; max frequency 64 MHz | 81 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins | V12 | 1.2 | 1.26 | 1.32 | V | VOS[1:0] bits in PWR_CR register = 0x10; max frequency 84 MHz | 81 |
| Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins | V12 | 1.26 | 1.32 | 1.38 | V | VOS[1:0] bits in PWR_CR register = 0x11; max frequency 100 MHz | 81 |
| Input voltage on RST, FT and TC pins | VIN | -0.3 | | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 82 |
| Input voltage on RST, FT and TC pins | VIN | -0.3 | | 5.2 | V | VDD ≤ 2 V | 82 |
| Input voltage on TTa pins | VIN | -0.3 | | | V | | 82 |
| Input voltage on BOOT0 pin | VIN | 0 | | 9 | V | | 82 |
| Power dissipation at TA = 85 °C for range 6 (UFQFPN48) | PD | | | 625 | mW | TA = 85 °C for range 6 (maximum power dissipation) | 82 |
| Ambient temperature for range 6, maximum power dissipation | TA | -40 | | 85 | °C | Maximum power dissipation | 82 |
| Ambient temperature for range 6, low power dissipation | TA | -40 | | 105 | °C | Low power dissipation | 82 |
| Junction temperature range (range 6) | TJ | -40 | | 105 | °C | Range 6 | 82 |
| VDD rise time rate | tVDD | 20 | | | µs/V | Regulator ON, power-up | 84 |
| VDD fall time rate | tVDD | 20 | | | µs/V | Regulator ON, power-down | 84 |
| ESR of external capacitor with a single VCAP pin available | ESR | | | 1 | Ω | Single VCAP pin available | 84 |
| Power-on/power-down reset threshold (falling edge) | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 85 |
| Power-on/power-down reset threshold (rising edge) | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 85 |
| PDR hysteresis | VPDRhyst | | | 40 | mV | | 85 |
| PVD hysteresis | VPVDhyst | | | 100 | mV | | 85 |
| BOR hysteresis | VBORhyst | | | 100 | mV | | 86 |
| POR reset timing | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | | 86 |
| In-Rush energy on voltage regulator power-on (POR or wakeup from Standby) | ERUSH | | | 5.4 | µC | VDD = 1.7 V, TA = 125 °C, IRUSH = 171 mA for 31 µs | 86 |
| LSI frequency | fLSI | 16.1 | 32 | 47 | kHz | VDD = 3 V, TA = -40 to 125 °C | 112 |
| LSI oscillator startup time | tsu(LSI) | | 15 | 40 | µs | | 112 |
| LSI oscillator power consumption | IDD(LSI) | | 0.4 | 0.6 | µA | | 112 |
| Capacitance of external capacitor with a single VCAP pin available | CEXT | | 4.7 | | µF | Single VCAP pin available | 84 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `STM32F413CGU6`
- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`
- 3D model: UFQFPN-48(7x7), generated on the KiCad land (body 7 x 7 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `stm32f413cgu6-etched.step` / `stm32f413cgu6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f413cgu6.step` / `stm32f413cgu6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32f413cgu6.pdf) (203 pp, sha256 `4157ab59cb88ac0f`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/stm32f413cgu6-datasheet.pdf)