main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32f410cbt6: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
stm32f410cbt6-etched.glb Publish 0.1.0 · Ray
stm32f410cbt6-etched.step stm32f410cbt6: factory component page (tier=mfr) · Ray
stm32f410cbt6-hero.glb stm32f410cbt6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32f410cbt6-hero.overlay.json Publish 0.1.0 · Ray
stm32f410cbt6.glb Publish 0.1.0 · Ray
stm32f410cbt6.kicad_mod Publish 0.1.0 · Ray
stm32f410cbt6.kicad_sym Publish 0.1.0 · Ray
stm32f410cbt6.lbr Publish 0.1.0 · Ray
stm32f410cbt6.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray

STM32F410CBT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

STM32F410CBT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply for the RTC, external 32 kHz oscillator and backup registers when VDD is not present, 1.65 V to 3.6 V.
2 PC13 bidirectional 5 V tolerant GPIO supplied through the power switch, which sinks only 3 mA, so output speed must not exceed 2 MHz at 30 pF and it must not source current such as an LED drive; also RTC_TAMP1, RTC_OUT and RTC_TS.
3 PC14-OSC32_IN bidirectional GPIO supplied through the power switch with the same 3 mA sink limit, also serving as OSC32_IN for the 32 kHz oscillator; 5 V tolerant except in oscillator mode.
4 PC15-OSC32_OUT bidirectional GPIO supplied through the power switch with the same 3 mA sink limit, also serving as OSC32_OUT for the 32 kHz oscillator.
5 PH0 - OSC_IN bidirectional GPIO also serving as OSC_IN for the 4-26 MHz crystal oscillator; 5 V tolerant except in oscillator mode.
6 PH1-OSC_OUT bidirectional GPIO also serving as OSC_OUT for the 4-26 MHz crystal oscillator; 5 V tolerant except in oscillator mode.
7 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
8 VSSA/VREF- power_in Analog ground and negative reference voltage for the ADC, reset blocks, RCs and PLL.
9 VDDA/VREF+ power_in Analog supply and positive reference voltage for the ADC, reset blocks, RCs and PLL, 1.7 V to 3.6 V, connected to VDD with decoupling.
10 PA0 bidirectional 5 V tolerant GPIO with ADC1_0 and WKUP1 wakeup, TIM5_CH1, USART2_CTS and EVENTOUT alternate functions.
11 PA1 bidirectional 5 V tolerant GPIO with ADC1_1, TIM5_CH2, USART2_RTS and EVENTOUT alternate functions.
12 PA2 bidirectional 5 V tolerant GPIO with ADC1_2, TIM5_CH3, TIM9_CH1, I2S2_CKIN and USART2_TX alternate functions.
13 PA3 bidirectional 5 V tolerant GPIO with ADC1_3, TIM5_CH4, TIM9_CH2, I2S2_MCK and USART2_RX alternate functions.
14 PA4 bidirectional 5 V tolerant GPIO with ADC1_4, SPI1_NSS/I2S1_WS and USART2_CK alternate functions.
15 PA5 bidirectional Standard 3.3 V I/O (TC, not 5 V tolerant) with ADC1_5, DAC_OUT1 and SPI1_SCK/I2S1_CK alternate functions.
16 PA6 bidirectional 5 V tolerant GPIO with ADC1_6, TIM1_BKIN, SPI1_MISO and I2S2_MCK alternate functions.
17 PA7 bidirectional 5 V tolerant GPIO with ADC1_7, TIM1_CH1N and SPI1_MOSI/I2S1_SD alternate functions.
18 PB0 bidirectional 5 V tolerant GPIO with ADC1_8, TIM1_CH2N and SPI5_SCK/I2S5_CK alternate functions.
19 PB1 bidirectional Standard 3.3 V I/O (TC, not 5 V tolerant) with ADC1_9, TIM1_CH3N and SPI5_NSS/I2S5_WS alternate functions.
20 PB2 bidirectional 5 V tolerant GPIO with LPTIM1_OUT alternate function and BOOT1 additional function.
21 PB10 bidirectional 5 V tolerant GPIO with I2C2_SCL, SPI2_SCK/I2S2_CK, I2S1_MCK and I2C4_SCL alternate functions.
22 VCAP_1 power_out Regulator decoupling pin that must be connected to an external VCAP_1 capacitor as described in Section 6.3.2.
23 VSS power_in Ground pin of the device.
24 VDD power_in Digital supply pin for the I/Os and internal regulator, 1.7 V to 3.6 V.
25 PB12 bidirectional 5 V tolerant GPIO with TIM1_BKIN, TIM5_CH1, I2C2_SMBA, SPI2_NSS/I2S2_WS and EVENTOUT alternate functions.
26 PB13 bidirectional 5 V tolerant GPIO with TIM1_CH1N, I2C4_SMBA and SPI2_SCK/I2S2_CK alternate functions.
27 PB14 bidirectional 5 V tolerant GPIO with TIM1_CH2N, I2C4_SDA and SPI2_MISO alternate functions.
28 PB15 bidirectional 5 V tolerant GPIO with RTC_50Hz, TIM1_CH3N, I2C4_SCL and SPI2_MOSI/I2S2_SD alternate functions.
29 PA8 bidirectional 5 V tolerant GPIO with MCO_1, TIM1_CH1, I2C4_SCL and USART1_CK alternate functions.
30 PA9 bidirectional 5 V tolerant GPIO with TIM1_CH2, USART1_TX and EVENTOUT alternate functions.
31 PA10 bidirectional 5 V tolerant GPIO with TIM1_CH3, SPI5_MOSI/I2S5_SD and USART1_RX alternate functions.
32 PA11 bidirectional 5 V tolerant GPIO with TIM1_CH4, USART1_CTS and USART6_TX alternate functions.
33 PA12 bidirectional 5 V tolerant GPIO with TIM1_ETR, SPI5_MISO, USART1_RTS and USART6_RX alternate functions.
34 PA13 bidirectional 5 V tolerant GPIO with JTMS-SWDIO serial wire debug function.
35 VSS power_in Ground pin of the device.
36 VDD power_in Digital supply pin for the I/Os and internal regulator, 1.7 V to 3.6 V.
37 PA14 bidirectional 5 V tolerant GPIO with JTCK-SWCLK serial wire debug function.
38 PA15 bidirectional 5 V tolerant GPIO with JTDI, SPI1_NSS/I2S1_WS and USART1_TX alternate functions.
39 PB3 bidirectional 5 V tolerant GPIO with JTDO-SWO, I2C4_SDA, SPI1_SCK/I2S1_CK, USART1_RX and I2C2_SDA alternate functions.
40 PB4 bidirectional 5 V tolerant GPIO with JTRST, SPI1_MISO and EVENTOUT alternate functions.
41 PB5 bidirectional 5 V tolerant GPIO with LPTIM1_IN1, I2C1_SMBA and SPI1_MOSI/I2S1_SD alternate functions.
42 PB6 bidirectional 5 V tolerant GPIO with LPTIM1_ETR, I2C1_SCL and USART1_TX alternate functions.
43 PB7 bidirectional 5 V tolerant GPIO with LPTIM1_IN2, I2C1_SDA and USART1_RX alternate functions.
44 BOOT0 input Dedicated BOOT0 pin sampled at startup to select one of three boot options: user Flash, system memory or embedded SRAM.
45 PB8 bidirectional 5 V tolerant GPIO with LPTIM1_OUT, I2C1_SCL and SPI5_MOSI/I2S5_SD alternate functions.
46 VSS power_in Ground pin of the device.
47 PDR_ON input Pin that enables the internal power supply supervisor (POR/PDR) when held high and disables it when set low.
48 VDD power_in Digital supply pin for the I/Os and internal regulator, 1.7 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Standard operating voltage VDD 1.7 3.6 V 53
Analog operating voltage (ADC limited to 1.2 M samples) VDDA 1.7 2.4 V Must be the same potential as VDD; ADC limited to 1.2 M samples 53
Analog operating voltage (ADC limited to 2.4 M samples) VDDA 2.4 3.6 V Must be the same potential as VDD; ADC limited to 2.4 M samples 53
Backup operating voltage VBAT 1.65 3.6 V 53
Internal AHB clock frequency (Power Scale1) fHCLK 0 100 MHz Power Scale1: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x11 53
Internal APB1 clock frequency fPCLK1 0 50 MHz 53
Internal APB2 clock frequency fPCLK2 0 100 MHz 53
Input voltage on RST, FT and TC pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 53
Input voltage on RST, FT and TC pins VIN -0.3 5.2 V VDD ≤ 2 V 53
Input voltage on BOOT0 pin VIN 0 9 V 53
Maximum allowed package power dissipation LQFP48 at TA = 85 °C (range 6) PD 364 mW Maximum allowed package power dissipation at TA = 85 °C (range 6) 54
Ambient temperature for range 6 (maximum power dissipation) TA -40 85 °C Ambient temperature for range 6, Maximum power dissipation 54
Ambient temperature for range 6 (low power dissipation) TA -40 105 °C Ambient temperature for range 6, Low power dissipation 54
Junction temperature range (range 6) TJ -40 105 °C Range 6 54
External main supply voltage (VDD, VDDA, VBAT) VDD-VSS -0.3 4 V Including VDDA, VDD and VBAT 51
Input voltage on any other pin VIN -0.3 4 V Input voltage on any other pin, relative to VSS 51
Input voltage on FT and TC pins VIN -0.3 V Min VSS-0.3; max VDD+4.0 V 51
Input voltage for BOOT0 VIN 9 V Min VSS 51
Maximum current into each VDD_x power line (source) IVDD 100 mA 52
Maximum current out of each VSS_x ground line (sink) IVSS -100 mA 52
Output current sunk by any I/O and control pin IIO 25 mA 52
Output current sourced by any I/O and control pin IIO -25 mA 52
Total output current sunk by sum of all I/O and control pins ΣIIO 120 mA 52
Total output current sourced by sum of all I/Os and control pins ΣIIO -120 mA 52
Storage temperature range TSTG -65 150 °C 52
Maximum junction temperature TJ 130 °C 52
Power-on/power-down reset threshold (falling edge) VPOR/PDR 1.6 1.68 1.76 V Falling edge 57
Power-on/power-down reset threshold (rising edge) VPOR/PDR 1.64 1.72 1.8 V Rising edge 57
Brownout level 1 threshold (falling edge) VBOR1 2.13 2.19 2.24 V Falling edge 57
Brownout level 1 threshold (rising edge) VBOR1 2.23 2.29 2.33 V Rising edge 57
Capacitance of external capacitor on VCAP_1 CEXT 4.7 µF 56
ESR of external capacitor on VCAP_1 ESR 1 Ω 56
Oscillator frequency HSE crystal/ceramic resonator fOSC_IN 4 26 MHz 81
External user clock source frequency HSE fHSE_ext 1 50 MHz 79
Accuracy of the HSI oscillator (user-trimmed) ACCHSI -1 1 % User-trimmed with the RCC_CR register 83
Accuracy of the HSI oscillator (factory-calibrated) ACCHSI -8 5.5 % Factory-calibrated, TA = -40 to 125 °C 83
Accuracy of the HSI oscillator (factory-calibrated) ACCHSI -4 4 % Factory-calibrated, TA = -10 to 85 °C 83
LSI oscillator frequency fLSI 17 32 47 kHz VDD = 3 V, TA = -40 to 125 °C 84
Main PLL input clock fPLL_IN 0.95 1 2.1 MHz 84
PLL VCO output fVCO_OUT 100 432 MHz 84
Feedback resistor LSE oscillator RF 18.4 MΩ 82

CAD (KiCad official)

  • Symbol: STM32F410CBT6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32f410cbt6-etched.step / stm32f410cbt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f410cbt6.step / stm32f410cbt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (143 pp, sha256 71946dd94c3eb53f, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF