component
STM32F405VGT6
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32F405VGT6
STMicroelectronics · ST Microelectronics · LQFP-100(14x14)
STM32F405VGT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACED0, FSMC_A19, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACED1, FSMC_A20, DCMI_D4, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7, EVENTOUT. |
| 6 | VBAT | power_in | Backup supply pin (type S) for the RTC, the 20x32-bit backup registers and the optional 4 KB backup SRAM. |
| 7 | PC13 | bidirectional | 5 V-tolerant (FT) I/O supplied through the power switch, which sinks only 3 mA, so in output mode the speed must not exceed 2 MHz at 30 pF and it must not be used as a current source; alternate functions RTC_OUT, RTC_TAMP1, RTC_TS. |
| 8 | PC14/OSC32_IN | bidirectional | 5 V-tolerant (FT, except in oscillator mode) I/O supplied through the power switch, limited to 3 mA and 2 MHz at 30 pF in output mode; additional function OSC32_IN. |
| 9 | PC15/OSC32_OUT | bidirectional | 5 V-tolerant (FT, except in oscillator mode) I/O supplied through the power switch, limited to 3 mA and 2 MHz at 30 pF in output mode; additional function OSC32_OUT. |
| 10 | VSS | power_in | Ground pin (type S) of the device. |
| 11 | VDD | power_in | Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os. |
| 12 | PH0/OSC_IN | bidirectional | 5 V-tolerant (FT, except in oscillator mode) I/O; additional function OSC_IN for the 4-26 MHz crystal oscillator; alternate function EVENTOUT. |
| 13 | PH1/OSC_OUT | bidirectional | 5 V-tolerant (FT, except in oscillator mode) I/O; additional function OSC_OUT for the 4-26 MHz crystal oscillator; alternate function EVENTOUT. |
| 14 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor (RST structure). |
| 15 | PC0 | bidirectional | 5 V-tolerant (FT) I/O, floating input after reset; alternate function OTG_HS_ULPI_STP, EVENTOUT; additional function ADC123_IN10. |
| 16 | PC1 | bidirectional | 5 V-tolerant (FT) I/O, floating input after reset; alternate function ETH_MDC, EVENTOUT; additional function ADC123_IN11. |
| 17 | PC2 | bidirectional | 5 V-tolerant (FT) I/O, floating input after reset; alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, I2S2ext_SD, EVENTOUT; additional function ADC123_IN12. |
| 18 | PC3 | bidirectional | 5 V-tolerant (FT) I/O, floating input after reset; alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, EVENTOUT; additional function ADC123_IN13. |
| 19 | VDD | power_in | Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os. |
| 20 | VSSA | power_in | Dedicated analog ground pin (type S) for the ADC and DAC. |
| 21 | VREF+ | power_in | Positive reference voltage pin (type S) for the ADC and DAC, with decoupling configurations shown in the reference decoupling figures. |
| 22 | VDDA | power_in | Dedicated analog supply pin (type S) for the ADC, DAC and reference, with decoupling shown in the power supply and reference decoupling figures. |
| 23 | PA0/WKUP | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, EVENTOUT; additional functions ADC123_IN0 and WKUP. |
| 24 | PA1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2, EVENTOUT; additional function ADC123_IN1. |
| 25 | PA2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO, EVENTOUT; additional function ADC123_IN2. |
| 26 | PA3 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL, EVENTOUT; additional function ADC123_IN3. |
| 27 | VSS | power_in | Ground pin (type S) of the device. |
| 28 | VDD | power_in | Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os. |
| 29 | PA4 | bidirectional | 3.3 V-tolerant (TTa) I/O directly connected to the ADC; alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS, EVENTOUT; additional functions ADC12_IN4 and DAC_OUT1. |
| 30 | PA5 | bidirectional | 3.3 V-tolerant (TTa) I/O directly connected to the ADC; alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N, EVENTOUT; additional functions ADC12_IN5 and DAC_OUT2. |
| 31 | PA6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN, EVENTOUT; additional function ADC12_IN6. |
| 32 | PA7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV, EVENTOUT; additional function ADC12_IN7. |
| 33 | PC4 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions ETH_RMII_RX_D0, ETH_MII_RX_D0, EVENTOUT; additional function ADC12_IN14. |
| 34 | PC5 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions ETH_RMII_RX_D1, ETH_MII_RX_D1, EVENTOUT; additional function ADC12_IN15. |
| 35 | PB0 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N, EVENTOUT; additional function ADC12_IN8. |
| 36 | PB1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N, EVENTOUT; additional function ADC12_IN9. |
| 37 | PB2/BOOT1 | bidirectional | 5 V-tolerant (FT) I/O; alternate function EVENTOUT; additional function BOOT1 (boot selection). |
| 38 | PE7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D4, TIM1_ETR, EVENTOUT. |
| 39 | PE8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT. |
| 40 | PE9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D6, TIM1_CH1, EVENTOUT. |
| 41 | PE10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT. |
| 42 | PE11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D8, TIM1_CH2, EVENTOUT. |
| 43 | PE12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT. |
| 44 | PE13 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D10, TIM1_CH3, EVENTOUT. |
| 45 | PE14 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D11, TIM1_CH4, EVENTOUT. |
| 46 | PE15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT. |
| 47 | PB10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, EVENTOUT. |
| 48 | PB11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN, ETH_RMII_TX_EN, TIM2_CH4, EVENTOUT. |
| 49 | VCAP_1 | power_in | Connection pin (type S) for the external capacitor of the internal voltage regulator; see section 6.3.2 for the VCAP_1/VCAP_2 external capacitor requirements. |
| 50 | VDD | power_in | Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os. |
| 51 | PB12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT. |
| 52 | PB13 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1, EVENTOUT; additional function OTG_HS_VBUS. |
| 53 | PB14 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, I2S2ext_SD, EVENTOUT. |
| 54 | PB15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, EVENTOUT; additional function RTC_REFIN. |
| 55 | PD8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D13, USART3_TX, EVENTOUT. |
| 56 | PD9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D14, USART3_RX, EVENTOUT. |
| 57 | PD10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D15, USART3_CK, EVENTOUT. |
| 58 | PD11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_CLE, FSMC_A16, USART3_CTS, EVENTOUT. |
| 59 | PD12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_ALE, FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT. |
| 60 | PD13 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_A18, TIM4_CH2, EVENTOUT. |
| 61 | PD14 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D0, TIM4_CH3, EVENTOUT. |
| 62 | PD15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D1, TIM4_CH4, EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2S_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0, EVENTOUT; additional function OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, EVENTOUT. |
| 70 | PA11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, EVENTOUT. |
| 72 | PA13 | bidirectional | 5 V-tolerant (FT) I/O whose function after reset is JTMS-SWDIO; alternate function EVENTOUT. |
| 73 | VCAP_2 | power_in | Connection pin (type S) for the external capacitor of the internal voltage regulator; see section 6.3.2 for the VCAP_1/VCAP_2 external capacitor requirements. |
| 74 | VSS | power_in | Ground pin (type S) of the device. |
| 75 | VDD | power_in | Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os. |
| 76 | PA14 | bidirectional | 5 V-tolerant (FT) I/O whose function after reset is JTCK-SWCLK; alternate function EVENTOUT. |
| 77 | PA15 | bidirectional | 5 V-tolerant (FT) I/O whose function after reset is JTDI; alternate functions JTDI, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI3_SCK, I2S3_CK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, I2S3ext_SD, EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D2, CAN1_RX, EVENTOUT. |
| 82 | PD1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_D3, CAN1_TX, EVENTOUT. |
| 83 | PD2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_CLK, USART2_CTS, EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NOE, USART2_RTS, EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NWE, USART2_TX, EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NWAIT, USART2_RX, EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT. |
| 89 | PB3 | bidirectional | 5 V-tolerant (FT) I/O whose function after reset is JTDO/TRACESWO; alternate functions SPI3_SCK, I2S3_CK, TIM2_CH2, SPI1_SCK, EVENTOUT. |
| 90 | PB4 | bidirectional | 5 V-tolerant (FT) I/O whose function after reset is NJTRST; alternate functions SPI3_MISO, TIM3_CH1, SPI1_MISO, I2S3ext_SD, EVENTOUT. |
| 91 | PB5 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, EVENTOUT. |
| 92 | PB6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX, TIM4_CH2, EVENTOUT. |
| 94 | BOOT0 | input | Dedicated BOOT0 input pin (input-only, B structure) used for boot selection together with BOOT1 on PB2; VPP is its additional function. |
| 95 | PB8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions FSMC_NBL1, DCMI_D3, EVENTOUT. |
| 99 | VSS | power_in | Ground pin (type S) of the device; on LQFP100 this position is VSS, not PDR_ON. |
| 100 | VDD | power_in | Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD) | VDD-VSS | -0.3 | 4 | V | 80 | ||
| Input voltage on any other pin | VIN | 4 | V | 80 | |||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 80 | |||
| Variations between all the different ground pins including VREF− | /VSSX −VSS/ | 50 | mV | 80 | |||
| Total current into VDD power lines (source) | IVDD | 240 | mA | 81 | |||
| Total current out of VSS ground lines (sink) | IVSS | 240 | mA | 81 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 81 | |||
| Output current source by any I/Os and control pin | IIO | 25 | mA | 81 | |||
| Injected current on five-volt tolerant I/O | IINJ(PIN) | -5 | 0 | mA | 81 | ||
| Injected current on any other pin | IINJ(PIN) | -5 | 5 | mA | 81 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 81 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 81 | ||
| Maximum junction temperature | TJ | 125 | °C | 81 | |||
| Internal AHB clock frequency | fHCLK | 0 | 144 | MHz | VOS bit in PWR_CR register = 0 | 81 | |
| Internal AHB clock frequency | fHCLK | 0 | 168 | MHz | VOS bit in PWR_CR register = 1 | 81 | |
| Internal APB1 clock frequency | fPCLK1 | 0 | 42 | MHz | 81 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 84 | MHz | 81 | ||
| Standard operating voltage | VDD | 1.8 | 3.6 | V | 81 | ||
| Analog operating voltage (ADC limited to 1.2 M samples) | VDDA | 1.8 | 2.4 | V | Must be the same potential as VDD | 81 | |
| Analog operating voltage (ADC limited to 1.4 M samples) | VDDA | 2.4 | 3.6 | V | Must be the same potential as VDD | 81 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 81 | ||
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.08 | 1.14 | 1.2 | V | Regulator ON, VOS bit = 0, max frequency 144 MHz | 82 |
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.2 | 1.26 | 1.32 | V | Regulator ON, VOS bit = 1, max frequency 168 MHz | 82 |
| 1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) | V12 | 1.1 | 1.14 | 1.2 | V | Regulator OFF, max frequency 144 MHz | 82 |
| 1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) | V12 | 1.2 | 1.26 | 1.3 | V | Regulator OFF, max frequency 168 MHz | 82 |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 82 | |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.2 | V | VDD ≤ 2 V | 82 | |
| Input voltage on TTa pins | VIN | -0.3 | V | 82 | |||
| Input voltage on B pin | VIN | 5.5 | V | 82 | |||
| Power dissipation (LQFP100) | PD | 465 | mW | TA = 85 °C for suffix 6 | 82 | ||
| Ambient temperature for 6 suffix version (maximum power dissipation) | TA | -40 | 85 | °C | Maximum power dissipation | 82 | |
| Ambient temperature for 6 suffix version (low-power dissipation) | TA | -40 | 105 | °C | Low-power dissipation | 82 | |
| Junction temperature range (6 suffix version) | TJ | -40 | 105 | °C | 6 suffix version | 82 | |
| VDD rise time rate | tVDD | 20 | µs/V | Operating conditions at power-up / power-down (regulator ON) | 84 | ||
| VDD fall time rate | tVDD | 20 | µs/V | Operating conditions at power-up / power-down (regulator ON) | 84 | ||
| VCAP_1 and VCAP_2 rise time rate | tVCAP | 20 | µs/V | Power-up, regulator OFF | 84 | ||
| VCAP_1 and VCAP_2 fall time rate | tVCAP | 20 | µs/V | Power-down, regulator OFF | 84 | ||
| Power-on/power-down reset threshold | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 85 |
| Power-on/power-down reset threshold | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 85 |
| Reset temporization | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | 85 | |
| InRush current on voltage regulator power-on (POR or wakeup from Standby) | IRUSH | 160 | 200 | mA | 85 | ||
| Supply current in Run mode (all peripherals enabled, ART on) | IDD | 87 | 109 | mA | External clock, fHCLK 168 MHz; typ at TA = 25 °C, max at TA = 105 °C | 87 | |
| Supply current in Run mode (all peripherals disabled, ART on) | IDD | 40 | 61 | mA | External clock, fHCLK 168 MHz; typ at TA = 25 °C, max at TA = 105 °C | 87 | |
| Supply current in Sleep mode (all peripherals enabled) | IDD | 59 | 84 | mA | External clock, fHCLK 168 MHz; typ at TA = 25 °C, max at TA = 105 °C | 91 | |
| Supply current in Stop mode, main regulator in Run mode | IDD_STOP | 0.45 | 20 | mA | Flash in Stop mode, low-speed and high-speed RC and HS oscillators OFF; typ at TA = 25 °C, max at TA = 105 °C | 92 | |
| Supply current in Stop mode, main regulator in Low-power mode | IDD_STOP | 0.31 | 15 | mA | Flash in Stop mode, low-speed and high-speed RC and HS oscillators OFF; typ at TA = 25 °C, max at TA = 105 °C | 92 | |
| Supply current in Standby mode (backup SRAM ON, LSE and RTC ON) | IDD_STBY | 36 | µA | VDD = 3.6 V, TA = 105 °C; typ 3.0/3.4/4.0 µA at VDD 1.8/2.4/3.3 V | 92 | ||
| HSI oscillator accuracy | ACCHSI | -8 | 4.5 | % | TA = -40 to 105 °C; VDD = 3.3 V, PLL OFF | 105 | |
| HSI oscillator accuracy | ACCHSI | -4 | 4 | % | TA = -10 to 85 °C; VDD = 3.3 V, PLL OFF | 105 | |
| HSI oscillator accuracy (factory calibrated) | ACCHSI | -1 | 1 | % | TA = 25 °C; VDD = 3.3 V, PLL OFF | 105 | |
| HSI oscillator startup time | tsu(HSI) | 2.2 | 4 | µs | 105 | ||
| HSI oscillator power consumption | IDD(HSI) | 60 | 80 | µA | 105 | ||
| LSI frequency | fLSI | 17 | 32 | 47 | kHz | VDD = 3 V, TA = -40 to 105 °C | 105 |
| LSI oscillator startup time | tsu(LSI) | 15 | 40 | µs | 105 | ||
| LSI oscillator power consumption | IDD(LSI) | 0.4 | 0.6 | µA | 105 | ||
| External user clock source frequency (HSE) | fHSE_ext | 1 | 50 | MHz | 101 | ||
| User external clock source frequency (LSE) | fLSE_ext | 32.768 | 1000 | kHz | 102 |
CAD (KiCad official)
- Symbol:
STM32F405VGT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f405vgt6-etched.step/stm32f405vgt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f405vgt6.step/stm32f405vgt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (206 pp, sha256
1f41b4fa49a99602, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).