Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F405VGT6

STMicroelectronics · ST Microelectronics · LQFP-100(14x14)

STM32F405VGT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACECLK, FSMC_A23, ETH_MII_TXD3, EVENTOUT.
2 PE3 bidirectional 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACED0, FSMC_A19, EVENTOUT.
3 PE4 bidirectional 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACED1, FSMC_A20, DCMI_D4, EVENTOUT.
4 PE5 bidirectional 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACED2, FSMC_A21, TIM9_CH1, DCMI_D6, EVENTOUT.
5 PE6 bidirectional 5 V-tolerant (FT) I/O, floating input after reset; alternate functions TRACED3, FSMC_A22, TIM9_CH2, DCMI_D7, EVENTOUT.
6 VBAT power_in Backup supply pin (type S) for the RTC, the 20x32-bit backup registers and the optional 4 KB backup SRAM.
7 PC13 bidirectional 5 V-tolerant (FT) I/O supplied through the power switch, which sinks only 3 mA, so in output mode the speed must not exceed 2 MHz at 30 pF and it must not be used as a current source; alternate functions RTC_OUT, RTC_TAMP1, RTC_TS.
8 PC14/OSC32_IN bidirectional 5 V-tolerant (FT, except in oscillator mode) I/O supplied through the power switch, limited to 3 mA and 2 MHz at 30 pF in output mode; additional function OSC32_IN.
9 PC15/OSC32_OUT bidirectional 5 V-tolerant (FT, except in oscillator mode) I/O supplied through the power switch, limited to 3 mA and 2 MHz at 30 pF in output mode; additional function OSC32_OUT.
10 VSS power_in Ground pin (type S) of the device.
11 VDD power_in Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os.
12 PH0/OSC_IN bidirectional 5 V-tolerant (FT, except in oscillator mode) I/O; additional function OSC_IN for the 4-26 MHz crystal oscillator; alternate function EVENTOUT.
13 PH1/OSC_OUT bidirectional 5 V-tolerant (FT, except in oscillator mode) I/O; additional function OSC_OUT for the 4-26 MHz crystal oscillator; alternate function EVENTOUT.
14 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor (RST structure).
15 PC0 bidirectional 5 V-tolerant (FT) I/O, floating input after reset; alternate function OTG_HS_ULPI_STP, EVENTOUT; additional function ADC123_IN10.
16 PC1 bidirectional 5 V-tolerant (FT) I/O, floating input after reset; alternate function ETH_MDC, EVENTOUT; additional function ADC123_IN11.
17 PC2 bidirectional 5 V-tolerant (FT) I/O, floating input after reset; alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2, I2S2ext_SD, EVENTOUT; additional function ADC123_IN12.
18 PC3 bidirectional 5 V-tolerant (FT) I/O, floating input after reset; alternate functions SPI2_MOSI, I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, EVENTOUT; additional function ADC123_IN13.
19 VDD power_in Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os.
20 VSSA power_in Dedicated analog ground pin (type S) for the ADC and DAC.
21 VREF+ power_in Positive reference voltage pin (type S) for the ADC and DAC, with decoupling configurations shown in the reference decoupling figures.
22 VDDA power_in Dedicated analog supply pin (type S) for the ADC, DAC and reference, with decoupling shown in the power supply and reference decoupling figures.
23 PA0/WKUP bidirectional 5 V-tolerant (FT) I/O; alternate functions USART2_CTS, UART4_TX, ETH_MII_CRS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, EVENTOUT; additional functions ADC123_IN0 and WKUP.
24 PA1 bidirectional 5 V-tolerant (FT) I/O; alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK, ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2, EVENTOUT; additional function ADC123_IN1.
25 PA2 bidirectional 5 V-tolerant (FT) I/O; alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO, EVENTOUT; additional function ADC123_IN2.
26 PA3 bidirectional 5 V-tolerant (FT) I/O; alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL, EVENTOUT; additional function ADC123_IN3.
27 VSS power_in Ground pin (type S) of the device.
28 VDD power_in Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os.
29 PA4 bidirectional 3.3 V-tolerant (TTa) I/O directly connected to the ADC; alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF, I2S3_WS, EVENTOUT; additional functions ADC12_IN4 and DAC_OUT1.
30 PA5 bidirectional 3.3 V-tolerant (TTa) I/O directly connected to the ADC; alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N, EVENTOUT; additional functions ADC12_IN5 and DAC_OUT2.
31 PA6 bidirectional 5 V-tolerant (FT) I/O; alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN, EVENTOUT; additional function ADC12_IN6.
32 PA7 bidirectional 5 V-tolerant (FT) I/O; alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV, TIM1_CH1N, ETH_RMII_CRS_DV, EVENTOUT; additional function ADC12_IN7.
33 PC4 bidirectional 5 V-tolerant (FT) I/O; alternate functions ETH_RMII_RX_D0, ETH_MII_RX_D0, EVENTOUT; additional function ADC12_IN14.
34 PC5 bidirectional 5 V-tolerant (FT) I/O; alternate functions ETH_RMII_RX_D1, ETH_MII_RX_D1, EVENTOUT; additional function ADC12_IN15.
35 PB0 bidirectional 5 V-tolerant (FT) I/O; alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N, EVENTOUT; additional function ADC12_IN8.
36 PB1 bidirectional 5 V-tolerant (FT) I/O; alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N, EVENTOUT; additional function ADC12_IN9.
37 PB2/BOOT1 bidirectional 5 V-tolerant (FT) I/O; alternate function EVENTOUT; additional function BOOT1 (boot selection).
38 PE7 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D4, TIM1_ETR, EVENTOUT.
39 PE8 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D5, TIM1_CH1N, EVENTOUT.
40 PE9 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D6, TIM1_CH1, EVENTOUT.
41 PE10 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D7, TIM1_CH2N, EVENTOUT.
42 PE11 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D8, TIM1_CH2, EVENTOUT.
43 PE12 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D9, TIM1_CH3N, EVENTOUT.
44 PE13 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D10, TIM1_CH3, EVENTOUT.
45 PE14 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D11, TIM1_CH4, EVENTOUT.
46 PE15 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D12, TIM1_BKIN, EVENTOUT.
47 PB10 bidirectional 5 V-tolerant (FT) I/O; alternate functions SPI2_SCK, I2S2_CK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3, EVENTOUT.
48 PB11 bidirectional 5 V-tolerant (FT) I/O; alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN, ETH_RMII_TX_EN, TIM2_CH4, EVENTOUT.
49 VCAP_1 power_in Connection pin (type S) for the external capacitor of the internal voltage regulator; see section 6.3.2 for the VCAP_1/VCAP_2 external capacitor requirements.
50 VDD power_in Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os.
51 PB12 bidirectional 5 V-tolerant (FT) I/O; alternate functions SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0, ETH_MII_TXD0, OTG_HS_ID, EVENTOUT.
52 PB13 bidirectional 5 V-tolerant (FT) I/O; alternate functions SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1, ETH_MII_TXD1, EVENTOUT; additional function OTG_HS_VBUS.
53 PB14 bidirectional 5 V-tolerant (FT) I/O; alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N, I2S2ext_SD, EVENTOUT.
54 PB15 bidirectional 5 V-tolerant (FT) I/O; alternate functions SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, EVENTOUT; additional function RTC_REFIN.
55 PD8 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D13, USART3_TX, EVENTOUT.
56 PD9 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D14, USART3_RX, EVENTOUT.
57 PD10 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D15, USART3_CK, EVENTOUT.
58 PD11 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_CLE, FSMC_A16, USART3_CTS, EVENTOUT.
59 PD12 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_ALE, FSMC_A17, TIM4_CH1, USART3_RTS, EVENTOUT.
60 PD13 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_A18, TIM4_CH2, EVENTOUT.
61 PD14 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D0, TIM4_CH3, EVENTOUT.
62 PD15 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D1, TIM4_CH4, EVENTOUT.
63 PC6 bidirectional 5 V-tolerant (FT) I/O; alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1, EVENTOUT.
64 PC7 bidirectional 5 V-tolerant (FT) I/O; alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2, EVENTOUT.
65 PC8 bidirectional 5 V-tolerant (FT) I/O; alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2, EVENTOUT.
66 PC9 bidirectional 5 V-tolerant (FT) I/O; alternate functions I2S_CKIN, MCO2, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4, EVENTOUT.
67 PA8 bidirectional 5 V-tolerant (FT) I/O; alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF, EVENTOUT.
68 PA9 bidirectional 5 V-tolerant (FT) I/O; alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0, EVENTOUT; additional function OTG_FS_VBUS.
69 PA10 bidirectional 5 V-tolerant (FT) I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1, EVENTOUT.
70 PA11 bidirectional 5 V-tolerant (FT) I/O; alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM, EVENTOUT.
71 PA12 bidirectional 5 V-tolerant (FT) I/O; alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP, EVENTOUT.
72 PA13 bidirectional 5 V-tolerant (FT) I/O whose function after reset is JTMS-SWDIO; alternate function EVENTOUT.
73 VCAP_2 power_in Connection pin (type S) for the external capacitor of the internal voltage regulator; see section 6.3.2 for the VCAP_1/VCAP_2 external capacitor requirements.
74 VSS power_in Ground pin (type S) of the device.
75 VDD power_in Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os.
76 PA14 bidirectional 5 V-tolerant (FT) I/O whose function after reset is JTCK-SWCLK; alternate function EVENTOUT.
77 PA15 bidirectional 5 V-tolerant (FT) I/O whose function after reset is JTDI; alternate functions JTDI, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, EVENTOUT.
78 PC10 bidirectional 5 V-tolerant (FT) I/O; alternate functions SPI3_SCK, I2S3_CK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX, EVENTOUT.
79 PC11 bidirectional 5 V-tolerant (FT) I/O; alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX, I2S3ext_SD, EVENTOUT.
80 PC12 bidirectional 5 V-tolerant (FT) I/O; alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI, I2S3_SD, USART3_CK, EVENTOUT.
81 PD0 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D2, CAN1_RX, EVENTOUT.
82 PD1 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_D3, CAN1_TX, EVENTOUT.
83 PD2 bidirectional 5 V-tolerant (FT) I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT.
84 PD3 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_CLK, USART2_CTS, EVENTOUT.
85 PD4 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_NOE, USART2_RTS, EVENTOUT.
86 PD5 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_NWE, USART2_TX, EVENTOUT.
87 PD6 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_NWAIT, USART2_RX, EVENTOUT.
88 PD7 bidirectional 5 V-tolerant (FT) I/O; alternate functions USART2_CK, FSMC_NE1, FSMC_NCE2, EVENTOUT.
89 PB3 bidirectional 5 V-tolerant (FT) I/O whose function after reset is JTDO/TRACESWO; alternate functions SPI3_SCK, I2S3_CK, TIM2_CH2, SPI1_SCK, EVENTOUT.
90 PB4 bidirectional 5 V-tolerant (FT) I/O whose function after reset is NJTRST; alternate functions SPI3_MISO, TIM3_CH1, SPI1_MISO, I2S3ext_SD, EVENTOUT.
91 PB5 bidirectional 5 V-tolerant (FT) I/O; alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, DCMI_D10, I2S3_SD, EVENTOUT.
92 PB6 bidirectional 5 V-tolerant (FT) I/O; alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX, EVENTOUT.
93 PB7 bidirectional 5 V-tolerant (FT) I/O; alternate functions I2C1_SDA, FSMC_NL, DCMI_VSYNC, USART1_RX, TIM4_CH2, EVENTOUT.
94 BOOT0 input Dedicated BOOT0 input pin (input-only, B structure) used for boot selection together with BOOT1 on PB2; VPP is its additional function.
95 PB8 bidirectional 5 V-tolerant (FT) I/O; alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX, EVENTOUT.
96 PB9 bidirectional 5 V-tolerant (FT) I/O; alternate functions SPI2_NSS, I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX, EVENTOUT.
97 PE0 bidirectional 5 V-tolerant (FT) I/O; alternate functions TIM4_ETR, FSMC_NBL0, DCMI_D2, EVENTOUT.
98 PE1 bidirectional 5 V-tolerant (FT) I/O; alternate functions FSMC_NBL1, DCMI_D3, EVENTOUT.
99 VSS power_in Ground pin (type S) of the device; on LQFP100 this position is VSS, not PDR_ON.
100 VDD power_in Supply pin (type S); the features list gives a 1.8 V to 3.6 V application supply for the I/Os.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VDD) VDD-VSS -0.3 4 V 80
Input voltage on any other pin VIN 4 V 80
Variations between different VDD power pins /ΔVDDx/ 50 mV 80
Variations between all the different ground pins including VREF− /VSSX −VSS/ 50 mV 80
Total current into VDD power lines (source) IVDD 240 mA 81
Total current out of VSS ground lines (sink) IVSS 240 mA 81
Output current sunk by any I/O and control pin IIO 25 mA 81
Output current source by any I/Os and control pin IIO 25 mA 81
Injected current on five-volt tolerant I/O IINJ(PIN) -5 0 mA 81
Injected current on any other pin IINJ(PIN) -5 5 mA 81
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 81
Storage temperature range TSTG -65 150 °C 81
Maximum junction temperature TJ 125 °C 81
Internal AHB clock frequency fHCLK 0 144 MHz VOS bit in PWR_CR register = 0 81
Internal AHB clock frequency fHCLK 0 168 MHz VOS bit in PWR_CR register = 1 81
Internal APB1 clock frequency fPCLK1 0 42 MHz 81
Internal APB2 clock frequency fPCLK2 0 84 MHz 81
Standard operating voltage VDD 1.8 3.6 V 81
Analog operating voltage (ADC limited to 1.2 M samples) VDDA 1.8 2.4 V Must be the same potential as VDD 81
Analog operating voltage (ADC limited to 1.4 M samples) VDDA 2.4 3.6 V Must be the same potential as VDD 81
Backup operating voltage VBAT 1.65 3.6 V 81
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.08 1.14 1.2 V Regulator ON, VOS bit = 0, max frequency 144 MHz 82
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.2 1.26 1.32 V Regulator ON, VOS bit = 1, max frequency 168 MHz 82
1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) V12 1.1 1.14 1.2 V Regulator OFF, max frequency 144 MHz 82
1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) V12 1.2 1.26 1.3 V Regulator OFF, max frequency 168 MHz 82
Input voltage on RST and FT pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 82
Input voltage on RST and FT pins VIN -0.3 5.2 V VDD ≤ 2 V 82
Input voltage on TTa pins VIN -0.3 V 82
Input voltage on B pin VIN 5.5 V 82
Power dissipation (LQFP100) PD 465 mW TA = 85 °C for suffix 6 82
Ambient temperature for 6 suffix version (maximum power dissipation) TA -40 85 °C Maximum power dissipation 82
Ambient temperature for 6 suffix version (low-power dissipation) TA -40 105 °C Low-power dissipation 82
Junction temperature range (6 suffix version) TJ -40 105 °C 6 suffix version 82
VDD rise time rate tVDD 20 µs/V Operating conditions at power-up / power-down (regulator ON) 84
VDD fall time rate tVDD 20 µs/V Operating conditions at power-up / power-down (regulator ON) 84
VCAP_1 and VCAP_2 rise time rate tVCAP 20 µs/V Power-up, regulator OFF 84
VCAP_1 and VCAP_2 fall time rate tVCAP 20 µs/V Power-down, regulator OFF 84
Power-on/power-down reset threshold VPOR/PDR 1.6 1.68 1.76 V Falling edge 85
Power-on/power-down reset threshold VPOR/PDR 1.64 1.72 1.8 V Rising edge 85
Reset temporization TRSTTEMPO 0.5 1.5 3 ms 85
InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSH 160 200 mA 85
Supply current in Run mode (all peripherals enabled, ART on) IDD 87 109 mA External clock, fHCLK 168 MHz; typ at TA = 25 °C, max at TA = 105 °C 87
Supply current in Run mode (all peripherals disabled, ART on) IDD 40 61 mA External clock, fHCLK 168 MHz; typ at TA = 25 °C, max at TA = 105 °C 87
Supply current in Sleep mode (all peripherals enabled) IDD 59 84 mA External clock, fHCLK 168 MHz; typ at TA = 25 °C, max at TA = 105 °C 91
Supply current in Stop mode, main regulator in Run mode IDD_STOP 0.45 20 mA Flash in Stop mode, low-speed and high-speed RC and HS oscillators OFF; typ at TA = 25 °C, max at TA = 105 °C 92
Supply current in Stop mode, main regulator in Low-power mode IDD_STOP 0.31 15 mA Flash in Stop mode, low-speed and high-speed RC and HS oscillators OFF; typ at TA = 25 °C, max at TA = 105 °C 92
Supply current in Standby mode (backup SRAM ON, LSE and RTC ON) IDD_STBY 36 µA VDD = 3.6 V, TA = 105 °C; typ 3.0/3.4/4.0 µA at VDD 1.8/2.4/3.3 V 92
HSI oscillator accuracy ACCHSI -8 4.5 % TA = -40 to 105 °C; VDD = 3.3 V, PLL OFF 105
HSI oscillator accuracy ACCHSI -4 4 % TA = -10 to 85 °C; VDD = 3.3 V, PLL OFF 105
HSI oscillator accuracy (factory calibrated) ACCHSI -1 1 % TA = 25 °C; VDD = 3.3 V, PLL OFF 105
HSI oscillator startup time tsu(HSI) 2.2 4 µs 105
HSI oscillator power consumption IDD(HSI) 60 80 µA 105
LSI frequency fLSI 17 32 47 kHz VDD = 3 V, TA = -40 to 105 °C 105
LSI oscillator startup time tsu(LSI) 15 40 µs 105
LSI oscillator power consumption IDD(LSI) 0.4 0.6 µA 105
External user clock source frequency (HSE) fHSE_ext 1 50 MHz 101
User external clock source frequency (LSE) fLSE_ext 32.768 1000 kHz 102

CAD (KiCad official)

  • Symbol: STM32F405VGT6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32f405vgt6-etched.step / stm32f405vgt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f405vgt6.step / stm32f405vgt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (206 pp, sha256 1f41b4fa49a99602, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF