main
History Download
Ray Publish 0.1.0 b27a668

STM32F401VET6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

STM32F401VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V tolerant GPIO (FT) with alternate functions SPI4_SCK, TRACECLK and EVENTOUT.
2 PE3 bidirectional 5 V tolerant GPIO (FT) with alternate functions TRACED0 and EVENTOUT.
3 PE4 bidirectional 5 V tolerant GPIO (FT) with alternate functions SPI4_NSS, TRACED1 and EVENTOUT.
4 PE5 bidirectional 5 V tolerant GPIO (FT) with alternate functions SPI4_MISO, TIM9_CH1, TRACED2 and EVENTOUT.
5 PE6 bidirectional 5 V tolerant GPIO (FT) with alternate functions SPI4_MOSI, TIM9_CH2, TRACED3 and EVENTOUT.
6 VBAT power_in Backup domain supply for the RTC and backup registers, which is used when VDD is not present.
7 PC13 bidirectional 5 V tolerant GPIO supplied through the power switch, limited to 3 mA sink, so output use is restricted to 2 MHz with 30 pF load and it must not source current; alternate functions RTC_TAMP1, RTC_OUT, RTC_TS and EVENTOUT.
8 PC14-OSC32_IN bidirectional GPIO PC14 supplied through the power switch (3 mA limit) that doubles as the 32 kHz oscillator input OSC32_IN.
9 PC15-OSC32_OUT bidirectional GPIO PC15 supplied through the power switch (3 mA limit) that doubles as the 32 kHz oscillator output OSC32_OUT.
10 VSS power_in Ground reference pin for the digital supply domain.
11 VDD power_in Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os.
12 PH0-OSC_IN bidirectional 5 V tolerant GPIO PH0 that serves as the high-speed oscillator input OSC_IN in oscillator mode.
13 PH1-OSC_OUT bidirectional 5 V tolerant GPIO PH1 that serves as the high-speed oscillator output OSC_OUT in oscillator mode.
14 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
15 PC0 bidirectional 5 V tolerant GPIO with EVENTOUT and ADC1 input channel ADC1_IN10.
16 PC1 bidirectional 5 V tolerant GPIO with EVENTOUT and ADC1 input channel ADC1_IN11.
17 PC2 bidirectional 5 V tolerant GPIO with alternate functions SPI2_MISO, I2S2ext_SD, EVENTOUT and ADC1 input ADC1_IN12.
18 PC3 bidirectional 5 V tolerant GPIO with alternate functions SPI2_MOSI/I2S2_SD, EVENTOUT and ADC1 input ADC1_IN13.
19 VDD power_in Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os.
20 VSSA/VREF- power_in Analog ground and negative ADC reference voltage pin, shared on this package.
21 VREF+ power_in Positive reference voltage input for the ADC.
22 VDDA power_in Analog power supply for the ADC, reset block, RC oscillators and PLL.
23 PA0 bidirectional 5 V tolerant GPIO with alternate functions USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT, ADC1_IN0 and WKUP wakeup input.
24 PA1 bidirectional 5 V tolerant GPIO with alternate functions USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT and ADC1_IN1.
25 PA2 bidirectional 5 V tolerant GPIO with alternate functions USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT and ADC1_IN2.
26 PA3 bidirectional 5 V tolerant GPIO with alternate functions USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT and ADC1_IN3.
27 VSS power_in Ground reference pin for the digital supply domain.
28 VDD power_in Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os.
29 PA4 bidirectional 5 V tolerant GPIO with alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT and ADC1_IN4.
30 PA5 bidirectional 5 V tolerant GPIO with alternate functions SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT and ADC1_IN5.
31 PA6 bidirectional 5 V tolerant GPIO with alternate functions SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT and ADC1_IN6.
32 PA7 bidirectional 5 V tolerant GPIO with alternate functions SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT and ADC1_IN7.
33 PC4 bidirectional 5 V tolerant GPIO with EVENTOUT and ADC1 input channel ADC1_IN14.
34 PC5 bidirectional 5 V tolerant GPIO with EVENTOUT and ADC1 input channel ADC1_IN15.
35 PB0 bidirectional 5 V tolerant GPIO with alternate functions TIM1_CH2N, TIM3_CH3, EVENTOUT and ADC1_IN8.
36 PB1 bidirectional 5 V tolerant GPIO with alternate functions TIM1_CH3N, TIM3_CH4, EVENTOUT and ADC1_IN9.
37 PB2 bidirectional 5 V tolerant GPIO with EVENTOUT, also used as the BOOT1 boot-mode pin.
38 PE7 bidirectional 5 V tolerant GPIO with alternate functions TIM1_ETR and EVENTOUT.
39 PE8 bidirectional 5 V tolerant GPIO with alternate functions TIM1_CH1N and EVENTOUT.
40 PE9 bidirectional 5 V tolerant GPIO with alternate functions TIM1_CH1 and EVENTOUT.
41 PE10 bidirectional 5 V tolerant GPIO with alternate functions TIM1_CH2N and EVENTOUT.
42 PE11 bidirectional 5 V tolerant GPIO with alternate functions SPI4_NSS, TIM1_CH2 and EVENTOUT.
43 PE12 bidirectional 5 V tolerant GPIO with alternate functions SPI4_SCK, TIM1_CH3N and EVENTOUT.
44 PE13 bidirectional 5 V tolerant GPIO with alternate functions SPI4_MISO, TIM1_CH3 and EVENTOUT.
45 PE14 bidirectional 5 V tolerant GPIO with alternate functions SPI4_MOSI, TIM1_CH4 and EVENTOUT.
46 PE15 bidirectional 5 V tolerant GPIO with alternate functions TIM1_BKIN and EVENTOUT.
47 PB10 bidirectional 5 V tolerant GPIO with alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3 and EVENTOUT.
48 VCAP1 passive Connection pin for the external capacitor of the internal 1.2 V regulator output VCAP1.
49 VSS power_in Ground reference pin for the digital supply domain.
50 VDD power_in Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os.
51 PB12 bidirectional 5 V tolerant GPIO with alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN and EVENTOUT.
52 PB13 bidirectional 5 V tolerant GPIO with alternate functions SPI2_SCK/I2S2_CK, TIM1_CH1N and EVENTOUT.
53 PB14 bidirectional 5 V tolerant GPIO with alternate functions SPI2_MISO, I2S2ext_SD, TIM1_CH2N and EVENTOUT.
54 PB15 bidirectional 5 V tolerant GPIO with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT and RTC_REFIN.
55 PD8 bidirectional 5 V tolerant GPIO with EVENTOUT as its alternate function.
56 PD9 bidirectional 5 V tolerant GPIO with EVENTOUT as its alternate function.
57 PD10 bidirectional 5 V tolerant GPIO with EVENTOUT as its alternate function.
58 PD11 bidirectional 5 V tolerant GPIO with EVENTOUT as its alternate function.
59 PD12 bidirectional 5 V tolerant GPIO with alternate functions TIM4_CH1 and EVENTOUT.
60 PD13 bidirectional 5 V tolerant GPIO with alternate functions TIM4_CH2 and EVENTOUT.
61 PD14 bidirectional 5 V tolerant GPIO with alternate functions TIM4_CH3 and EVENTOUT.
62 PD15 bidirectional 5 V tolerant GPIO with alternate functions TIM4_CH4 and EVENTOUT.
63 PC6 bidirectional 5 V tolerant GPIO with alternate functions I2S2_MCK, USART6_TX, TIM3_CH1, SDIO_D6 and EVENTOUT.
64 PC7 bidirectional 5 V tolerant GPIO with alternate functions I2S3_MCK, USART6_RX, TIM3_CH2, SDIO_D7 and EVENTOUT.
65 PC8 bidirectional 5 V tolerant GPIO with alternate functions USART6_CK, TIM3_CH3, SDIO_D0 and EVENTOUT.
66 PC9 bidirectional 5 V tolerant GPIO with alternate functions I2S_CKIN, I2C3_SDA, TIM3_CH4, SDIO_D1, MCO_2 and EVENTOUT.
67 PA8 bidirectional 5 V tolerant GPIO with alternate functions I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1 and EVENTOUT.
68 PA9 bidirectional 5 V tolerant GPIO with alternate functions I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT and OTG_FS_VBUS.
69 PA10 bidirectional 5 V tolerant GPIO with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID and EVENTOUT.
70 PA11 bidirectional 5 V tolerant GPIO with alternate functions USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM and EVENTOUT.
71 PA12 bidirectional 5 V tolerant GPIO with alternate functions USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP and EVENTOUT.
72 PA13 bidirectional 5 V tolerant GPIO that is JTMS-SWDIO after reset for serial wire debug, with EVENTOUT.
73 VCAP2 passive Connection pin for the external capacitor of the internal 1.2 V regulator output VCAP2.
74 VSS power_in Ground reference pin for the digital supply domain.
75 VDD power_in Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os.
76 PA14 bidirectional 5 V tolerant GPIO that is JTCK-SWCLK after reset for serial wire debug, with EVENTOUT.
77 PA15 bidirectional 5 V tolerant GPIO with JTDI, alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR and EVENTOUT.
78 PC10 bidirectional 5 V tolerant GPIO with alternate functions SPI3_SCK/I2S3_CK, SDIO_D2 and EVENTOUT.
79 PC11 bidirectional 5 V tolerant GPIO with alternate functions I2S3ext_SD, SPI3_MISO, SDIO_D3 and EVENTOUT.
80 PC12 bidirectional 5 V tolerant GPIO with alternate functions SPI3_MOSI/I2S3_SD, SDIO_CK and EVENTOUT.
81 PD0 bidirectional 5 V tolerant GPIO with EVENTOUT as its alternate function.
82 PD1 bidirectional 5 V tolerant GPIO with EVENTOUT as its alternate function.
83 PD2 bidirectional 5 V tolerant GPIO with alternate functions TIM3_ETR, SDIO_CMD and EVENTOUT.
84 PD3 bidirectional 5 V tolerant GPIO with alternate functions SPI2_SCK/I2S2_CK, USART2_CTS and EVENTOUT.
85 PD4 bidirectional 5 V tolerant GPIO with alternate functions USART2_RTS and EVENTOUT.
86 PD5 bidirectional 5 V tolerant GPIO with alternate functions USART2_TX and EVENTOUT.
87 PD6 bidirectional 5 V tolerant GPIO with alternate functions SPI3_MOSI/I2S3_SD, USART2_RX and EVENTOUT.
88 PD7 bidirectional 5 V tolerant GPIO with alternate functions USART2_CK and EVENTOUT.
89 PB3 bidirectional 5 V tolerant GPIO that is JTDO-SWO after reset, with alternate functions SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2 and EVENTOUT.
90 PB4 bidirectional 5 V tolerant GPIO that is NJTRST after reset, with alternate functions SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1 and EVENTOUT.
91 PB5 bidirectional 5 V tolerant GPIO with alternate functions SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2 and EVENTOUT.
92 PB6 bidirectional 5 V tolerant GPIO with alternate functions I2C1_SCL, USART1_TX, TIM4_CH1 and EVENTOUT.
93 PB7 bidirectional 5 V tolerant GPIO with alternate functions I2C1_SDA, USART1_RX, TIM4_CH2 and EVENTOUT.
94 BOOT0 input Dedicated BOOT0 boot-mode selection input pin.
95 PB8 bidirectional 5 V tolerant GPIO with alternate functions I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4 and EVENTOUT.
96 PB9 bidirectional 5 V tolerant GPIO with alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5 and EVENTOUT.
97 PE0 bidirectional 5 V tolerant GPIO with alternate functions TIM4_ETR and EVENTOUT.
98 PE1 bidirectional 5 V tolerant GPIO with EVENTOUT as its alternate function.
99 VSS power_in Ground reference pin for the digital supply domain.
100 VDD power_in Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Internal AHB clock frequency fHCLK 0 60 MHz Power Scale3: Regulator ON, VOS[1:0] bits in PWR_CR = 0x01 60
Internal AHB clock frequency fHCLK 0 84 MHz Power Scale2: Regulator ON, VOS[1:0] bits in PWR_CR = 0x10 60
Internal APB1 clock frequency fPCLK1 0 42 MHz 60
Internal APB2 clock frequency fPCLK2 0 84 MHz 60
Standard operating voltage VDD 1.7 3.6 V 60
Analog operating voltage VDDA 1.7 2.4 V ADC limited to 1.2 M samples; must be the same potential as VDD 60
Analog operating voltage VDDA 2.4 3.6 V ADC limited to 2.4 M samples 60
Backup operating voltage VBAT 1.65 3.6 V 60
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.08 1.14 1.2 V Regulator ON, VOS[1:0]=0x01, max frequency 60 MHz 60
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.2 1.26 1.32 V Regulator ON, VOS[1:0]=0x10, max frequency 84 MHz 60
1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) V12 1.1 1.14 1.2 V Regulator OFF, max frequency 60 MHz 60
1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) V12 1.2 1.26 1.32 V Regulator OFF, max frequency 84 MHz 60
Input voltage on RST and FT pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 60
Input voltage on RST and FT pins VIN -0.3 5.2 V VDD ≤ 2 V 60
Input voltage on BOOT0 pin VIN 0 9 V 60
Ambient temperature, 6 suffix version, maximum power dissipation TA -40 85 °C Maximum power dissipation 61
Ambient temperature, 6 suffix version, low power dissipation TA -40 105 °C Low power dissipation 61
Junction temperature range, 6 suffix version TJ -40 105 °C 6 suffix version 61
External main supply voltage (including VDDA, VDD and VBAT) VDD-VSS -0.3 4 V 58
Variations between different VDD power pins /ΔVDDx/ 50 mV 58
Variations between all the different ground pins /VSSX −VSS/ 50 mV 58
Input voltage for BOOT0 VIN 9 V Input voltage for BOOT0 58
Total current into sum of all VDD_x power lines (source) ΣIVDD 160 mA 59
Total current out of sum of all VSS_x ground lines (sink) ΣIVSS -160 mA 59
Maximum current into each VDD_x power line (source) IVDD 100 mA 59
Maximum current out of each VSS_x ground line (sink) IVSS -100 mA 59
Output current sunk by any I/O and control pin IIO 25 mA 59
Output current sourced by any I/O and control pin IIO -25 mA 59
Total output current sunk by sum of all I/O and control pins ΣIIO 120 mA 59
Total output current sourced by sum of all I/Os and control pins ΣIIO -120 mA 59
Injected current on FT pins IINJ(PIN) -5 0 mA 59
Injected current on NRST and B pins IINJ(PIN) -5 0 mA 59
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 59
Storage temperature range TSTG -65 150 °C 59
Maximum junction temperature TJ 125 °C 59
Capacitance of external capacitor with available VCAP1 and VCAP2 pins CEXT 2.2 µF 62
ESR of external capacitor with available VCAP1 and VCAP2 pins ESR 2 Ω 62
VDD rise time rate tVDD 20 µs/V Regulator ON power-up 63
VDD fall time rate tVDD 20 µs/V Regulator ON power-down 63
Power-on/power-down reset threshold, falling edge VPOR/PDR 1.6 1.68 1.76 V Falling edge 64
Power-on/power-down reset threshold, rising edge VPOR/PDR 1.64 1.72 1.8 V Rising edge 64
Run mode supply current, Flash, ART enabled, VDD=3.3 V IDD 23.4 26.8 mA External clock, all peripherals enabled, fHCLK 84 MHz; max at TA=105 °C 67
Stop mode supply current, main regulator, Flash in Stop mode, VDD=3.3 V IDD_STOP 111 670 µA All oscillators OFF, no independent watchdog; max at TA=105 °C 70
Stop mode supply current, low power regulator, Flash in Stop mode, VDD=3.3 V IDD_STOP 42 560 µA Low power regulator usage, Flash in Stop mode, all oscillators OFF; max at TA=105 °C 70
Standby mode supply current, VDD=3.3 V IDD_STBY 2.8 28 µA Low-speed oscillator (LSE) and RTC ON; max at TA=105 °C 70
Wakeup from Standby mode tWUSTDBY 314 407 µs Measured from wakeup event to first instruction read 75
HSE oscillator frequency fOSC_IN 4 26 MHz 78
HSE feedback resistor RF 200 kΩ 78
HSI oscillator frequency fHSI 16 MHz 80
Accuracy of HSI oscillator, user-trimmed ACCHSI 1 % User-trimmed with the RCC_CR register 80
Accuracy of HSI oscillator, factory-calibrated ACCHSI -8 4.5 % TA = -40 to 105 °C 80
Accuracy of HSI oscillator, factory-calibrated ACCHSI -4 4 % TA = -10 to 85 °C 80
Accuracy of HSI oscillator, factory-calibrated ACCHSI -1 1 % TA = 25 °C 80
LSI oscillator frequency fLSI 17 32 47 kHz VDD = 3 V, TA = -40 to 105 °C 81
PLL input clock fPLL_IN 0.95 1 2.1 MHz 82
PLL multiplier output clock fPLL_OUT 24 84 MHz 82
PLL VCO output fVCO_OUT 192 432 MHz 82
Supply for 8-bit program operation Vprog 1.7 3.6 V 8-bit program operation 86
Supply for 16-bit program operation Vprog 2.1 3.6 V 16-bit program operation 86
Flash endurance NEND 10 kcycles TA = -40 to +85 °C (6 suffix versions) 87

CAD (KiCad official)

  • Symbol: STM32F401VET6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32f401vet6-etched.step / stm32f401vet6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f401vet6.step / stm32f401vet6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (135 pp, sha256 7daad2163948dcbe, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF