Generated by kicad-footprint-generator · KiCad file format 20260206
STM32F401VET6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F401VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant GPIO (FT) with alternate functions SPI4_SCK, TRACECLK and EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V tolerant GPIO (FT) with alternate functions TRACED0 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V tolerant GPIO (FT) with alternate functions SPI4_NSS, TRACED1 and EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V tolerant GPIO (FT) with alternate functions SPI4_MISO, TIM9_CH1, TRACED2 and EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V tolerant GPIO (FT) with alternate functions SPI4_MOSI, TIM9_CH2, TRACED3 and EVENTOUT. |
| 6 | VBAT | power_in | Backup domain supply for the RTC and backup registers, which is used when VDD is not present. |
| 7 | PC13 | bidirectional | 5 V tolerant GPIO supplied through the power switch, limited to 3 mA sink, so output use is restricted to 2 MHz with 30 pF load and it must not source current; alternate functions RTC_TAMP1, RTC_OUT, RTC_TS and EVENTOUT. |
| 8 | PC14-OSC32_IN | bidirectional | GPIO PC14 supplied through the power switch (3 mA limit) that doubles as the 32 kHz oscillator input OSC32_IN. |
| 9 | PC15-OSC32_OUT | bidirectional | GPIO PC15 supplied through the power switch (3 mA limit) that doubles as the 32 kHz oscillator output OSC32_OUT. |
| 10 | VSS | power_in | Ground reference pin for the digital supply domain. |
| 11 | VDD | power_in | Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os. |
| 12 | PH0-OSC_IN | bidirectional | 5 V tolerant GPIO PH0 that serves as the high-speed oscillator input OSC_IN in oscillator mode. |
| 13 | PH1-OSC_OUT | bidirectional | 5 V tolerant GPIO PH1 that serves as the high-speed oscillator output OSC_OUT in oscillator mode. |
| 14 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V tolerant GPIO with EVENTOUT and ADC1 input channel ADC1_IN10. |
| 16 | PC1 | bidirectional | 5 V tolerant GPIO with EVENTOUT and ADC1 input channel ADC1_IN11. |
| 17 | PC2 | bidirectional | 5 V tolerant GPIO with alternate functions SPI2_MISO, I2S2ext_SD, EVENTOUT and ADC1 input ADC1_IN12. |
| 18 | PC3 | bidirectional | 5 V tolerant GPIO with alternate functions SPI2_MOSI/I2S2_SD, EVENTOUT and ADC1 input ADC1_IN13. |
| 19 | VDD | power_in | Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os. |
| 20 | VSSA/VREF- | power_in | Analog ground and negative ADC reference voltage pin, shared on this package. |
| 21 | VREF+ | power_in | Positive reference voltage input for the ADC. |
| 22 | VDDA | power_in | Analog power supply for the ADC, reset block, RC oscillators and PLL. |
| 23 | PA0 | bidirectional | 5 V tolerant GPIO with alternate functions USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT, ADC1_IN0 and WKUP wakeup input. |
| 24 | PA1 | bidirectional | 5 V tolerant GPIO with alternate functions USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT and ADC1_IN1. |
| 25 | PA2 | bidirectional | 5 V tolerant GPIO with alternate functions USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT and ADC1_IN2. |
| 26 | PA3 | bidirectional | 5 V tolerant GPIO with alternate functions USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT and ADC1_IN3. |
| 27 | VSS | power_in | Ground reference pin for the digital supply domain. |
| 28 | VDD | power_in | Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os. |
| 29 | PA4 | bidirectional | 5 V tolerant GPIO with alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT and ADC1_IN4. |
| 30 | PA5 | bidirectional | 5 V tolerant GPIO with alternate functions SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT and ADC1_IN5. |
| 31 | PA6 | bidirectional | 5 V tolerant GPIO with alternate functions SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT and ADC1_IN6. |
| 32 | PA7 | bidirectional | 5 V tolerant GPIO with alternate functions SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT and ADC1_IN7. |
| 33 | PC4 | bidirectional | 5 V tolerant GPIO with EVENTOUT and ADC1 input channel ADC1_IN14. |
| 34 | PC5 | bidirectional | 5 V tolerant GPIO with EVENTOUT and ADC1 input channel ADC1_IN15. |
| 35 | PB0 | bidirectional | 5 V tolerant GPIO with alternate functions TIM1_CH2N, TIM3_CH3, EVENTOUT and ADC1_IN8. |
| 36 | PB1 | bidirectional | 5 V tolerant GPIO with alternate functions TIM1_CH3N, TIM3_CH4, EVENTOUT and ADC1_IN9. |
| 37 | PB2 | bidirectional | 5 V tolerant GPIO with EVENTOUT, also used as the BOOT1 boot-mode pin. |
| 38 | PE7 | bidirectional | 5 V tolerant GPIO with alternate functions TIM1_ETR and EVENTOUT. |
| 39 | PE8 | bidirectional | 5 V tolerant GPIO with alternate functions TIM1_CH1N and EVENTOUT. |
| 40 | PE9 | bidirectional | 5 V tolerant GPIO with alternate functions TIM1_CH1 and EVENTOUT. |
| 41 | PE10 | bidirectional | 5 V tolerant GPIO with alternate functions TIM1_CH2N and EVENTOUT. |
| 42 | PE11 | bidirectional | 5 V tolerant GPIO with alternate functions SPI4_NSS, TIM1_CH2 and EVENTOUT. |
| 43 | PE12 | bidirectional | 5 V tolerant GPIO with alternate functions SPI4_SCK, TIM1_CH3N and EVENTOUT. |
| 44 | PE13 | bidirectional | 5 V tolerant GPIO with alternate functions SPI4_MISO, TIM1_CH3 and EVENTOUT. |
| 45 | PE14 | bidirectional | 5 V tolerant GPIO with alternate functions SPI4_MOSI, TIM1_CH4 and EVENTOUT. |
| 46 | PE15 | bidirectional | 5 V tolerant GPIO with alternate functions TIM1_BKIN and EVENTOUT. |
| 47 | PB10 | bidirectional | 5 V tolerant GPIO with alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3 and EVENTOUT. |
| 48 | VCAP1 | passive | Connection pin for the external capacitor of the internal 1.2 V regulator output VCAP1. |
| 49 | VSS | power_in | Ground reference pin for the digital supply domain. |
| 50 | VDD | power_in | Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os. |
| 51 | PB12 | bidirectional | 5 V tolerant GPIO with alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN and EVENTOUT. |
| 52 | PB13 | bidirectional | 5 V tolerant GPIO with alternate functions SPI2_SCK/I2S2_CK, TIM1_CH1N and EVENTOUT. |
| 53 | PB14 | bidirectional | 5 V tolerant GPIO with alternate functions SPI2_MISO, I2S2ext_SD, TIM1_CH2N and EVENTOUT. |
| 54 | PB15 | bidirectional | 5 V tolerant GPIO with alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT and RTC_REFIN. |
| 55 | PD8 | bidirectional | 5 V tolerant GPIO with EVENTOUT as its alternate function. |
| 56 | PD9 | bidirectional | 5 V tolerant GPIO with EVENTOUT as its alternate function. |
| 57 | PD10 | bidirectional | 5 V tolerant GPIO with EVENTOUT as its alternate function. |
| 58 | PD11 | bidirectional | 5 V tolerant GPIO with EVENTOUT as its alternate function. |
| 59 | PD12 | bidirectional | 5 V tolerant GPIO with alternate functions TIM4_CH1 and EVENTOUT. |
| 60 | PD13 | bidirectional | 5 V tolerant GPIO with alternate functions TIM4_CH2 and EVENTOUT. |
| 61 | PD14 | bidirectional | 5 V tolerant GPIO with alternate functions TIM4_CH3 and EVENTOUT. |
| 62 | PD15 | bidirectional | 5 V tolerant GPIO with alternate functions TIM4_CH4 and EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V tolerant GPIO with alternate functions I2S2_MCK, USART6_TX, TIM3_CH1, SDIO_D6 and EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V tolerant GPIO with alternate functions I2S3_MCK, USART6_RX, TIM3_CH2, SDIO_D7 and EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V tolerant GPIO with alternate functions USART6_CK, TIM3_CH3, SDIO_D0 and EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V tolerant GPIO with alternate functions I2S_CKIN, I2C3_SDA, TIM3_CH4, SDIO_D1, MCO_2 and EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V tolerant GPIO with alternate functions I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1 and EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V tolerant GPIO with alternate functions I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT and OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5 V tolerant GPIO with alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID and EVENTOUT. |
| 70 | PA11 | bidirectional | 5 V tolerant GPIO with alternate functions USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM and EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V tolerant GPIO with alternate functions USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP and EVENTOUT. |
| 72 | PA13 | bidirectional | 5 V tolerant GPIO that is JTMS-SWDIO after reset for serial wire debug, with EVENTOUT. |
| 73 | VCAP2 | passive | Connection pin for the external capacitor of the internal 1.2 V regulator output VCAP2. |
| 74 | VSS | power_in | Ground reference pin for the digital supply domain. |
| 75 | VDD | power_in | Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os. |
| 76 | PA14 | bidirectional | 5 V tolerant GPIO that is JTCK-SWCLK after reset for serial wire debug, with EVENTOUT. |
| 77 | PA15 | bidirectional | 5 V tolerant GPIO with JTDI, alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR and EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V tolerant GPIO with alternate functions SPI3_SCK/I2S3_CK, SDIO_D2 and EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V tolerant GPIO with alternate functions I2S3ext_SD, SPI3_MISO, SDIO_D3 and EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V tolerant GPIO with alternate functions SPI3_MOSI/I2S3_SD, SDIO_CK and EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V tolerant GPIO with EVENTOUT as its alternate function. |
| 82 | PD1 | bidirectional | 5 V tolerant GPIO with EVENTOUT as its alternate function. |
| 83 | PD2 | bidirectional | 5 V tolerant GPIO with alternate functions TIM3_ETR, SDIO_CMD and EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V tolerant GPIO with alternate functions SPI2_SCK/I2S2_CK, USART2_CTS and EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V tolerant GPIO with alternate functions USART2_RTS and EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V tolerant GPIO with alternate functions USART2_TX and EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V tolerant GPIO with alternate functions SPI3_MOSI/I2S3_SD, USART2_RX and EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V tolerant GPIO with alternate functions USART2_CK and EVENTOUT. |
| 89 | PB3 | bidirectional | 5 V tolerant GPIO that is JTDO-SWO after reset, with alternate functions SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2 and EVENTOUT. |
| 90 | PB4 | bidirectional | 5 V tolerant GPIO that is NJTRST after reset, with alternate functions SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1 and EVENTOUT. |
| 91 | PB5 | bidirectional | 5 V tolerant GPIO with alternate functions SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2 and EVENTOUT. |
| 92 | PB6 | bidirectional | 5 V tolerant GPIO with alternate functions I2C1_SCL, USART1_TX, TIM4_CH1 and EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V tolerant GPIO with alternate functions I2C1_SDA, USART1_RX, TIM4_CH2 and EVENTOUT. |
| 94 | BOOT0 | input | Dedicated BOOT0 boot-mode selection input pin. |
| 95 | PB8 | bidirectional | 5 V tolerant GPIO with alternate functions I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4 and EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V tolerant GPIO with alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5 and EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V tolerant GPIO with alternate functions TIM4_ETR and EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V tolerant GPIO with EVENTOUT as its alternate function. |
| 99 | VSS | power_in | Ground reference pin for the digital supply domain. |
| 100 | VDD | power_in | Digital power supply pin for the device, 1.7 V to 3.6 V application supply and I/Os. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Internal AHB clock frequency | fHCLK | 0 | 60 | MHz | Power Scale3: Regulator ON, VOS[1:0] bits in PWR_CR = 0x01 | 60 | |
| Internal AHB clock frequency | fHCLK | 0 | 84 | MHz | Power Scale2: Regulator ON, VOS[1:0] bits in PWR_CR = 0x10 | 60 | |
| Internal APB1 clock frequency | fPCLK1 | 0 | 42 | MHz | 60 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 84 | MHz | 60 | ||
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 60 | ||
| Analog operating voltage | VDDA | 1.7 | 2.4 | V | ADC limited to 1.2 M samples; must be the same potential as VDD | 60 | |
| Analog operating voltage | VDDA | 2.4 | 3.6 | V | ADC limited to 2.4 M samples | 60 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 60 | ||
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.08 | 1.14 | 1.2 | V | Regulator ON, VOS[1:0]=0x01, max frequency 60 MHz | 60 |
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.2 | 1.26 | 1.32 | V | Regulator ON, VOS[1:0]=0x10, max frequency 84 MHz | 60 |
| 1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) | V12 | 1.1 | 1.14 | 1.2 | V | Regulator OFF, max frequency 60 MHz | 60 |
| 1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) | V12 | 1.2 | 1.26 | 1.32 | V | Regulator OFF, max frequency 84 MHz | 60 |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 60 | |
| Input voltage on RST and FT pins | VIN | -0.3 | 5.2 | V | VDD ≤ 2 V | 60 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 60 | ||
| Ambient temperature, 6 suffix version, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation | 61 | |
| Ambient temperature, 6 suffix version, low power dissipation | TA | -40 | 105 | °C | Low power dissipation | 61 | |
| Junction temperature range, 6 suffix version | TJ | -40 | 105 | °C | 6 suffix version | 61 | |
| External main supply voltage (including VDDA, VDD and VBAT) | VDD-VSS | -0.3 | 4 | V | 58 | ||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 58 | |||
| Variations between all the different ground pins | /VSSX −VSS/ | 50 | mV | 58 | |||
| Input voltage for BOOT0 | VIN | 9 | V | Input voltage for BOOT0 | 58 | ||
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | 160 | mA | 59 | |||
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | -160 | mA | 59 | |||
| Maximum current into each VDD_x power line (source) | IVDD | 100 | mA | 59 | |||
| Maximum current out of each VSS_x ground line (sink) | IVSS | -100 | mA | 59 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 59 | |||
| Output current sourced by any I/O and control pin | IIO | -25 | mA | 59 | |||
| Total output current sunk by sum of all I/O and control pins | ΣIIO | 120 | mA | 59 | |||
| Total output current sourced by sum of all I/Os and control pins | ΣIIO | -120 | mA | 59 | |||
| Injected current on FT pins | IINJ(PIN) | -5 | 0 | mA | 59 | ||
| Injected current on NRST and B pins | IINJ(PIN) | -5 | 0 | mA | 59 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 59 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 59 | ||
| Maximum junction temperature | TJ | 125 | °C | 59 | |||
| Capacitance of external capacitor with available VCAP1 and VCAP2 pins | CEXT | 2.2 | µF | 62 | |||
| ESR of external capacitor with available VCAP1 and VCAP2 pins | ESR | 2 | Ω | 62 | |||
| VDD rise time rate | tVDD | 20 | µs/V | Regulator ON power-up | 63 | ||
| VDD fall time rate | tVDD | 20 | µs/V | Regulator ON power-down | 63 | ||
| Power-on/power-down reset threshold, falling edge | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 64 |
| Power-on/power-down reset threshold, rising edge | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 64 |
| Run mode supply current, Flash, ART enabled, VDD=3.3 V | IDD | 23.4 | 26.8 | mA | External clock, all peripherals enabled, fHCLK 84 MHz; max at TA=105 °C | 67 | |
| Stop mode supply current, main regulator, Flash in Stop mode, VDD=3.3 V | IDD_STOP | 111 | 670 | µA | All oscillators OFF, no independent watchdog; max at TA=105 °C | 70 | |
| Stop mode supply current, low power regulator, Flash in Stop mode, VDD=3.3 V | IDD_STOP | 42 | 560 | µA | Low power regulator usage, Flash in Stop mode, all oscillators OFF; max at TA=105 °C | 70 | |
| Standby mode supply current, VDD=3.3 V | IDD_STBY | 2.8 | 28 | µA | Low-speed oscillator (LSE) and RTC ON; max at TA=105 °C | 70 | |
| Wakeup from Standby mode | tWUSTDBY | 314 | 407 | µs | Measured from wakeup event to first instruction read | 75 | |
| HSE oscillator frequency | fOSC_IN | 4 | 26 | MHz | 78 | ||
| HSE feedback resistor | RF | 200 | kΩ | 78 | |||
| HSI oscillator frequency | fHSI | 16 | MHz | 80 | |||
| Accuracy of HSI oscillator, user-trimmed | ACCHSI | 1 | % | User-trimmed with the RCC_CR register | 80 | ||
| Accuracy of HSI oscillator, factory-calibrated | ACCHSI | -8 | 4.5 | % | TA = -40 to 105 °C | 80 | |
| Accuracy of HSI oscillator, factory-calibrated | ACCHSI | -4 | 4 | % | TA = -10 to 85 °C | 80 | |
| Accuracy of HSI oscillator, factory-calibrated | ACCHSI | -1 | 1 | % | TA = 25 °C | 80 | |
| LSI oscillator frequency | fLSI | 17 | 32 | 47 | kHz | VDD = 3 V, TA = -40 to 105 °C | 81 |
| PLL input clock | fPLL_IN | 0.95 | 1 | 2.1 | MHz | 82 | |
| PLL multiplier output clock | fPLL_OUT | 24 | 84 | MHz | 82 | ||
| PLL VCO output | fVCO_OUT | 192 | 432 | MHz | 82 | ||
| Supply for 8-bit program operation | Vprog | 1.7 | 3.6 | V | 8-bit program operation | 86 | |
| Supply for 16-bit program operation | Vprog | 2.1 | 3.6 | V | 16-bit program operation | 86 | |
| Flash endurance | NEND | 10 | kcycles | TA = -40 to +85 °C (6 suffix versions) | 87 |
CAD (KiCad official)
- Symbol:
STM32F401VET6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f401vet6-etched.step/stm32f401vet6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f401vet6.step/stm32f401vet6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (135 pp, sha256
7daad2163948dcbe, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).