← Commit history

Initial commit: component/stm32f401ccu6

Ray ·38d8cae66a ·
2 files changed +487
README.mdadded+102
@@ -0,0 +1,102 @@+# STM32F401CCU6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)++STM32F401CCU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup domain supply, 1.65 V-3.6 V. Powers RTC, LSE, and backup registers when VDD is off. |+| 2 | PC13 | bidirectional | General-purpose 5 V-tolerant I/O. Supplied via the backup power switch (max sink 3 mA, 2 MHz / 30 pF limit). Alt functions: EVENTOUT; additional: RTC_TAMP1, RTC_OUT, RTC_TS. |+| 3 | PC14/OSC32_IN | bidirectional | GPIO (FT except in oscillator/analog mode) or low-speed 32.768 kHz LSE crystal input. Backup-domain I/O with limited drive. |+| 4 | PC15/OSC32_OUT | bidirectional | GPIO (FT except in oscillator/analog mode) or 32.768 kHz LSE crystal output. Backup-domain I/O. |+| 5 | PH0/OSC_IN | bidirectional | GPIO or main HSE crystal/clock input (4-26 MHz). FT except in oscillator/analog mode. |+| 6 | PH1/OSC_OUT | bidirectional | GPIO or main HSE crystal output. FT except in oscillator/analog mode. |+| 7 | NRST | bidirectional | Bidirectional device reset input/open-drain output with embedded weak pull-up (~40 kΩ). Active low. |+| 8 | VSSA/VREF- | power_in | Analog ground and negative ADC reference (tied together on this package). Connect to system ground. |+| 9 | VDDA/VREF+ | power_in | Analog supply and positive ADC reference (tied together on this package). 1.7 V-3.6 V. Decouple with 100 nF + 1 µF. |+| 10 | PA0-WKUP | bidirectional | GPIO (FT). Alt: USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT. Additional: ADC1_IN0, WKUP (wake-up from Standby). |+| 11 | PA1 | bidirectional | GPIO (FT). Alt: USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT. Additional: ADC1_IN1. |+| 12 | PA2 | bidirectional | GPIO (FT). Alt: USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT. Additional: ADC1_IN2. |+| 13 | PA3 | bidirectional | GPIO (FT). Alt: USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT. Additional: ADC1_IN3. |+| 14 | PA4 | bidirectional | GPIO (FT). Alt: SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT. Additional: ADC1_IN4. |+| 15 | PA5 | bidirectional | GPIO (FT). Alt: SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT. Additional: ADC1_IN5. |+| 16 | PA6 | bidirectional | GPIO (FT). Alt: SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT. Additional: ADC1_IN6. |+| 17 | PA7 | bidirectional | GPIO (FT). Alt: SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT. Additional: ADC1_IN7. |+| 18 | PB0 | bidirectional | GPIO (FT). Alt: TIM1_CH2N, TIM3_CH3, EVENTOUT. Additional: ADC1_IN8. |+| 19 | PB1 | bidirectional | GPIO (FT). Alt: TIM1_CH3N, TIM3_CH4, EVENTOUT. Additional: ADC1_IN9. |+| 20 | PB2/BOOT1 | bidirectional | GPIO (FT). Alt: EVENTOUT. Additional: BOOT1 boot-mode selector (sampled at reset together with BOOT0). |+| 21 | PB10 | bidirectional | GPIO (FT). Alt: SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, EVENTOUT. |+| 22 | VCAP_1 | passive | Internal 1.2 V regulator decoupling pin. Connect a 2.2 µF ceramic to VSS (see datasheet Table 15). |+| 23 | VSS | power_in | Digital ground. |+| 24 | VDD | power_in | Digital I/O and core supply, 1.7 V-3.6 V. Decouple with 100 nF per pin plus a bulk cap. |+| 25 | PB12 | bidirectional | GPIO (FT). Alt: SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, EVENTOUT. |+| 26 | PB13 | bidirectional | GPIO (FT). Alt: SPI2_SCK/I2S2_CK, TIM1_CH1N, EVENTOUT. |+| 27 | PB14 | bidirectional | GPIO (FT). Alt: SPI2_MISO, I2S2ext_SD, TIM1_CH2N, EVENTOUT. |+| 28 | PB15 | bidirectional | GPIO (FT). Alt: SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT. Additional: RTC_REFIN. |+| 29 | PA8 | bidirectional | GPIO (FT). Alt: I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1, EVENTOUT. |+| 30 | PA9 | bidirectional | GPIO (FT). Alt: I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT. Additional: OTG_FS_VBUS (USB VBUS sense). |+| 31 | PA10 | bidirectional | GPIO (FT). Alt: USART1_RX, TIM1_CH3, OTG_FS_ID, EVENTOUT. Serves as USB OTG ID pin. |+| 32 | PA11 | bidirectional | GPIO (FT). Alt: USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM (USB D−), EVENTOUT. |+| 33 | PA12 | bidirectional | GPIO (FT). Alt: USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP (USB D+), EVENTOUT. |+| 34 | PA13/JTMS-SWDIO | bidirectional | GPIO (FT). Alt: JTMS/SWDIO debug data. Default after reset: SWDIO with internal pull-up. |+| 35 | VSS | power_in | Digital ground. |+| 36 | VDD | power_in | Digital I/O and core supply, 1.7 V-3.6 V. |+| 37 | PA14/JTCK-SWCLK | bidirectional | GPIO (FT). Alt: JTCK/SWCLK debug clock. Default after reset: SWCLK with internal pull-down. |+| 38 | PA15/JTDI | bidirectional | GPIO (FT). Alt: JTDI, SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, EVENTOUT. Default after reset: JTDI with pull-up. |+| 39 | PB3/JTDO-SWO | bidirectional | GPIO (FT). Alt: JTDO/SWO trace, SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, EVENTOUT. |+| 40 | PB4/NJTRST | bidirectional | GPIO (FT). Alt: NJTRST, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1, EVENTOUT. Default after reset: NJTRST with pull-up. |+| 41 | PB5 | bidirectional | GPIO (FT). Alt: SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, EVENTOUT. |+| 42 | PB6 | bidirectional | GPIO (FT). Alt: I2C1_SCL, USART1_TX, TIM4_CH1, EVENTOUT. |+| 43 | PB7 | bidirectional | GPIO (FT). Alt: I2C1_SDA, USART1_RX, TIM4_CH2, EVENTOUT. |+| 44 | BOOT0 | input | Boot-mode select input (dedicated BOOT0 pad). Also VPP for factory programming. Sampled at reset with BOOT1 to select main flash / system memory / SRAM boot. |+| 45 | PB8 | bidirectional | GPIO (FT). Alt: I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, EVENTOUT. |+| 46 | PB9 | bidirectional | GPIO (FT). Alt: SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, EVENTOUT. |+| 47 | VSS | power_in | Digital ground. |+| 48 | VDD | power_in | Digital I/O and core supply, 1.7 V-3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Core | Arm Cortex-M4 |+| Max clock | 84 MHz |+| Flash | 256 kB |+| RAM | 64 kB |+| I/O pins | 36 |+| ADC units | 1 |+| Supply | 1.7 to 3.6 V |+| Temperature | -40 to 85 C |+| ST status | Active |+| Manufacturer | STMicroelectronics |+| Package | UFQFPN-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## Ordering variants++Same part, different packaging or reel option.++- `STM32F401CCU6U`+- `STM32F401CCU6Y`+- `STM32F401CCU6R`+- `STM32F401CCU6V`+- `STM32F401CCU6H`++## CAD (KiCad official)++- Symbol: `STM32F401CCU6`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8576163259906785280) (52 pp, sha256 `9b9598e12e8fc850`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f401ccu6-datasheet.pdf)
page.jsonadded+385
@@ -0,0 +1,385 @@+{+  "slug": "stm32f401ccu6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f401ccu6"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f401ccu6.kicad_sym",+    "stm32f401ccu6.kicad_mod",+    "stm32f401ccu6.glb",+    "stm32f401ccu6.step",+    "stm32f401ccu6.lbr",+    "docs/hero.png",+    "docs/stm32f401ccu6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F401CCU6",+    "manufacturer": "STMicroelectronics",+    "package": "UFQFPN-48(7x7)",+    "pin_count": 48,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8576163259906785280",+    "parts": {+      "symbol": "stm32f401ccu6.kicad_sym",+      "footprint": "stm32f401ccu6.kicad_mod",+      "model_3d": "stm32f401ccu6.glb",+      "model_3d_step": "stm32f401ccu6.step",+      "lbr": "stm32f401ccu6.lbr"+    },+    "distributor_links": {+      "lcsc": "C79861"+    },+    "mcu": {+      "part_number": "STM32F401CCU6",+      "series": "STM32F4",+      "subfamily": "STM32F401",+      "core": "Arm Cortex-M4",+      "frequency_mhz": 84,+      "flash_kb": 256,+      "ram_kb": 64,+      "io_count": 36,+      "package": "UFQFPN 48 7x7x0.55 mm",+      "marketing_status": "Active",+      "fpu": "Single-precision FPU",+      "supply_v_min": 1.7,+      "supply_v_max": 3.6,+      "temp_min_c": -40,+      "temp_max_c": 85,+      "adc_count": 1,+      "timers": 6,+      "in_distributor_stock": true,+      "product_folder": "/en/microcontrollers-microprocessors/stm32f401cc.html",+      "source": "st.com portfolio grid CL1734"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup domain supply, 1.65 V-3.6 V. Powers RTC, LSE, and backup registers when VDD is off."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "General-purpose 5 V-tolerant I/O. Supplied via the backup power switch (max sink 3 mA, 2 MHz / 30 pF limit). Alt functions: EVENTOUT; additional: RTC_TAMP1, RTC_OUT, RTC_TS."+      },+      {+        "number": "3",+        "name": "PC14/OSC32_IN",+        "type": "bidirectional",+        "description": "GPIO (FT except in oscillator/analog mode) or low-speed 32.768 kHz LSE crystal input. Backup-domain I/O with limited drive."+      },+      {+        "number": "4",+        "name": "PC15/OSC32_OUT",+        "type": "bidirectional",+        "description": "GPIO (FT except in oscillator/analog mode) or 32.768 kHz LSE crystal output. Backup-domain I/O."+      },+      {+        "number": "5",+        "name": "PH0/OSC_IN",+        "type": "bidirectional",+        "description": "GPIO or main HSE crystal/clock input (4-26 MHz). FT except in oscillator/analog mode."+      },+      {+        "number": "6",+        "name": "PH1/OSC_OUT",+        "type": "bidirectional",+        "description": "GPIO or main HSE crystal output. FT except in oscillator/analog mode."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional device reset input/open-drain output with embedded weak pull-up (~40 kΩ). Active low."+      },+      {+        "number": "8",+        "name": "VSSA/VREF-",+        "type": "power_in",+        "description": "Analog ground and negative ADC reference (tied together on this package). Connect to system ground."+      },+      {+        "number": "9",+        "name": "VDDA/VREF+",+        "type": "power_in",+        "description": "Analog supply and positive ADC reference (tied together on this package). 1.7 V-3.6 V. Decouple with 100 nF + 1 µF."+      },+      {+        "number": "10",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT. Additional: ADC1_IN0, WKUP (wake-up from Standby)."+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT. Additional: ADC1_IN1."+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT. Additional: ADC1_IN2."+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT. Additional: ADC1_IN3."+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT. Additional: ADC1_IN4."+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT. Additional: ADC1_IN5."+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT. Additional: ADC1_IN6."+      },+      {+        "number": "17",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT. Additional: ADC1_IN7."+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: TIM1_CH2N, TIM3_CH3, EVENTOUT. Additional: ADC1_IN8."+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: TIM1_CH3N, TIM3_CH4, EVENTOUT. Additional: ADC1_IN9."+      },+      {+        "number": "20",+        "name": "PB2/BOOT1",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: EVENTOUT. Additional: BOOT1 boot-mode selector (sampled at reset together with BOOT0)."+      },+      {+        "number": "21",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, EVENTOUT."+      },+      {+        "number": "22",+        "name": "VCAP_1",+        "type": "passive",+        "description": "Internal 1.2 V regulator decoupling pin. Connect a 2.2 µF ceramic to VSS (see datasheet Table 15)."+      },+      {+        "number": "23",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "24",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital I/O and core supply, 1.7 V-3.6 V. Decouple with 100 nF per pin plus a bulk cap."+      },+      {+        "number": "25",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, EVENTOUT."+      },+      {+        "number": "26",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI2_SCK/I2S2_CK, TIM1_CH1N, EVENTOUT."+      },+      {+        "number": "27",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI2_MISO, I2S2ext_SD, TIM1_CH2N, EVENTOUT."+      },+      {+        "number": "28",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT. Additional: RTC_REFIN."+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, MCO_1, EVENTOUT."+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT. Additional: OTG_FS_VBUS (USB VBUS sense)."+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: USART1_RX, TIM1_CH3, OTG_FS_ID, EVENTOUT. Serves as USB OTG ID pin."+      },+      {+        "number": "32",+        "name": "PA11",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: USART1_CTS, USART6_TX, TIM1_CH4, OTG_FS_DM (USB D−), EVENTOUT."+      },+      {+        "number": "33",+        "name": "PA12",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: USART1_RTS, USART6_RX, TIM1_ETR, OTG_FS_DP (USB D+), EVENTOUT."+      },+      {+        "number": "34",+        "name": "PA13/JTMS-SWDIO",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: JTMS/SWDIO debug data. Default after reset: SWDIO with internal pull-up."+      },+      {+        "number": "35",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "36",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital I/O and core supply, 1.7 V-3.6 V."+      },+      {+        "number": "37",+        "name": "PA14/JTCK-SWCLK",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: JTCK/SWCLK debug clock. Default after reset: SWCLK with internal pull-down."+      },+      {+        "number": "38",+        "name": "PA15/JTDI",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: JTDI, SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, EVENTOUT. Default after reset: JTDI with pull-up."+      },+      {+        "number": "39",+        "name": "PB3/JTDO-SWO",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: JTDO/SWO trace, SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, EVENTOUT."+      },+      {+        "number": "40",+        "name": "PB4/NJTRST",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: NJTRST, SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1, EVENTOUT. Default after reset: NJTRST with pull-up."+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, EVENTOUT."+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: I2C1_SCL, USART1_TX, TIM4_CH1, EVENTOUT."+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: I2C1_SDA, USART1_RX, TIM4_CH2, EVENTOUT."+      },+      {+        "number": "44",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot-mode select input (dedicated BOOT0 pad). Also VPP for factory programming. Sampled at reset with BOOT1 to select main flash / system memory / SRAM boot."+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, EVENTOUT."+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO (FT). Alt: SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, EVENTOUT."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital I/O and core supply, 1.7 V-3.6 V."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8576163259906785280",+        "pages": 52,+        "sha256": "9b9598e12e8fc850",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file