main
History Download
Ray Publish 0.1.0 5105079

STM32F401CBU7

STMicroelectronics · ST Microelectronics · UFQFPN-48(7x7)

STM32F401CBU7 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Power supply for the RTC and backup domain, with the datasheet quoting VBAT supply for RTC at 1 µA @25 °C.
2 PC13 bidirectional 5 V tolerant I/O supplied through the power switch, which sinks only 3 mA, so output use is limited to 2 MHz max with 30 pF max load and it must not source current such as driving an LED; alternate functions EVENTOUT, RTC_TAMP1, RTC_OUT, RTC_TS.
3 PC14-OSC32_IN (PC14) bidirectional 5 V tolerant I/O (except in oscillator mode) with the same power-switch limit of 3 mA as PC13, and OSC32_IN is the 32.768 kHz LSE oscillator input function.
4 PC15-OSC32_OUT (PC15) bidirectional 5 V tolerant I/O (except in oscillator mode) with the same power-switch limit of 3 mA as PC13, and OSC32_OUT is the LSE oscillator output function.
5 PH0-OSC_IN bidirectional 5 V tolerant I/O (except in oscillator mode) whose additional function OSC_IN is the 4-26 MHz HSE oscillator input.
6 PH1-OSC_OUT (PH1) bidirectional 5 V tolerant I/O (except in oscillator mode) whose additional function OSC_OUT is the 4-26 MHz HSE oscillator output.
7 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
8 VSSA/VREF- power_in Analog ground pin shared with the ADC negative reference VREF-.
9 VDDA/VREF+ power_in Analog supply pin shared with the ADC positive reference VREF+.
10 PA0 bidirectional 5 V tolerant I/O with ADC1_IN0 and WKUP wakeup; alternate functions USART2_CTS, TIM2_CH1/TIM2_ETR, TIM5_CH1, EVENTOUT.
11 PA1 bidirectional 5 V tolerant I/O with ADC1_IN1; alternate functions USART2_RTS, TIM2_CH2, TIM5_CH2, EVENTOUT.
12 PA2 bidirectional 5 V tolerant I/O with ADC1_IN2; alternate functions USART2_TX, TIM2_CH3, TIM5_CH3, TIM9_CH1, EVENTOUT.
13 PA3 bidirectional 5 V tolerant I/O with ADC1_IN3; alternate functions USART2_RX, TIM2_CH4, TIM5_CH4, TIM9_CH2, EVENTOUT.
14 PA4 bidirectional 5 V tolerant I/O with ADC1_IN4; alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, EVENTOUT.
15 PA5 bidirectional 5 V tolerant I/O with ADC1_IN5; alternate functions SPI1_SCK, TIM2_CH1/TIM2_ETR, EVENTOUT.
16 PA6 bidirectional 5 V tolerant I/O with ADC1_IN6; alternate functions SPI1_MISO, TIM1_BKIN, TIM3_CH1, EVENTOUT.
17 PA7 bidirectional 5 V tolerant I/O with ADC1_IN7; alternate functions SPI1_MOSI, TIM1_CH1N, TIM3_CH2, EVENTOUT.
18 PB0 bidirectional 5 V tolerant I/O with ADC1_IN8; alternate functions TIM1_CH2N, TIM3_CH3, EVENTOUT.
19 PB1 bidirectional 5 V tolerant I/O with ADC1_IN9; alternate functions TIM1_CH3N, TIM3_CH4, EVENTOUT.
20 PB2 bidirectional 5 V tolerant I/O whose additional function is BOOT1; alternate function EVENTOUT.
21 PB10 bidirectional 5 V tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, I2C2_SCL, TIM2_CH3, EVENTOUT.
22 VCAP_1 power_in Connection for the external VCAP_1 capacitor of the internal voltage regulator (see section 6.3.2).
23 VSS power_in Ground pin for the digital supply.
24 VDD power_in Digital supply pin; application supply range is 1.7 V to 3.6 V.
25 PB12 bidirectional 5 V tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, TIM1_BKIN, EVENTOUT.
26 PB13 bidirectional 5 V tolerant I/O; alternate functions SPI2_SCK/I2S2_CK, TIM1_CH1N, EVENTOUT.
27 PB14 bidirectional 5 V tolerant I/O; alternate functions SPI2_MISO, I2S2ext_SD, TIM1_CH2N, EVENTOUT.
28 PB15 bidirectional 5 V tolerant I/O with additional function RTC_REFIN; alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, EVENTOUT.
29 PA8 bidirectional 5 V tolerant I/O with additional function MCO_1; alternate functions I2C3_SCL, USART1_CK, TIM1_CH1, OTG_FS_SOF, EVENTOUT.
30 PA9 bidirectional 5 V tolerant I/O with additional function OTG_FS_VBUS; alternate functions I2C3_SMBA, USART1_TX, TIM1_CH2, EVENTOUT.
31 PA10 bidirectional 5 V tolerant I/O with additional function OTG_FS_ID; alternate functions USART1_RX, TIM1_CH3, EVENTOUT.
32 PA11 bidirectional 5 V tolerant I/O with additional function OTG_FS_DM; alternate functions USART1_CTS, USART6_TX, TIM1_CH4, EVENTOUT.
33 PA12 bidirectional 5 V tolerant I/O with additional function OTG_FS_DP; alternate functions USART1_RTS, USART6_RX, TIM1_ETR, EVENTOUT.
34 PA13 (JTMS-SWDIO) bidirectional 5 V tolerant I/O whose debug function is JTMS-SWDIO; alternate function EVENTOUT.
35 VSS power_in Ground pin for the digital supply.
36 VDD power_in Digital supply pin; application supply range is 1.7 V to 3.6 V.
37 PA14 (JTCK-SWCLK) bidirectional 5 V tolerant I/O whose debug function is JTCK-SWCLK; alternate function EVENTOUT.
38 PA15 (JTDI) bidirectional 5 V tolerant I/O whose debug function is JTDI; alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, TIM2_CH1/TIM2_ETR, EVENTOUT.
39 PB3 (JTDO-SWO) bidirectional 5 V tolerant I/O whose debug function is JTDO-SWO; alternate functions SPI1_SCK, SPI3_SCK/I2S3_CK, I2C2_SDA, TIM2_CH2, EVENTOUT.
40 PB4 (NJTRST) bidirectional 5 V tolerant I/O whose debug function is NJTRST; alternate functions SPI1_MISO, SPI3_MISO, I2S3ext_SD, I2C3_SDA, TIM3_CH1, EVENTOUT.
41 PB5 bidirectional 5 V tolerant I/O; alternate functions SPI1_MOSI, SPI3_MOSI/I2S3_SD, I2C1_SMBA, TIM3_CH2, EVENTOUT.
42 PB6 bidirectional 5 V tolerant I/O; alternate functions I2C1_SCL, USART1_TX, TIM4_CH1, EVENTOUT.
43 PB7 bidirectional 5 V tolerant I/O; alternate functions I2C1_SDA, USART1_RX, TIM4_CH2, EVENTOUT.
44 BOOT0 input Dedicated BOOT0 pin used for boot selection, with additional function VPP.
45 PB8 bidirectional 5 V tolerant I/O; alternate functions I2C1_SCL, TIM4_CH3, TIM10_CH1, SDIO_D4, EVENTOUT.
46 PB9 bidirectional 5 V tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, I2C1_SDA, TIM4_CH4, TIM11_CH1, SDIO_D5, EVENTOUT.
47 VSS power_in Ground pin for the digital supply.
48 VDD power_in Digital supply pin; application supply range is 1.7 V to 3.6 V.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-48(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VDD and VBAT) VDD-VSS -0.3 4 V 57
Input voltage on any other pin VIN 4 V 57
Input voltage for BOOT0 VIN 9 V 57
Variations between different VDD power pins /ΔVDDx/ 50 mV 57
Variations between all the different ground pins including VREF- /VSSx −VSS/ 50 mV 57
Total current into sum of all VDD_x power lines (source) ΣIVDD 160 mA 58
Total current out of sum of all VSS_x ground lines (sink) ΣIVSS -160 mA 58
Maximum current into each VDD_x power line (source) IVDD 100 mA 58
Maximum current out of each VSS_x ground line (sink) IVSS -100 mA 58
Output current sunk by any I/O and control pin IIO 25 mA 58
Output current sourced by any I/O and control pin IIO -25 mA 58
Total output current sunk by sum of all I/O and control pins ΣIIO 120 mA 58
Total output current sourced by sum of all I/Os and control pins ΣIIO -120 mA 58
Injected current on FT pins IINJ(PIN) -5 0 mA 58
Injected current on NRST and B pins IINJ(PIN) -5 0 mA 58
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 58
Storage temperature range TSTG -65 150 °C 58
Maximum junction temperature TJ 130 °C 58
Internal AHB clock frequency fHCLK 0 60 MHz Power Scale3: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x01 59
Internal AHB clock frequency fHCLK 0 84 MHz Power Scale2: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x10 59
Internal APB1 clock frequency fPCLK1 0 42 MHz 59
Internal APB2 clock frequency fPCLK2 0 84 MHz 59
Standard operating voltage VDD 1.7 3.6 V 59
Analog operating voltage (ADC limited to 1.2 M samples), must be the same potential as VDD VDDA 1.7 2.4 V ADC limited to 1.2 M samples 59
Analog operating voltage (ADC limited to 2.4 M samples) VDDA 2.4 3.6 V ADC limited to 2.4 M samples 59
Backup operating voltage VBAT 1.65 3.6 V 59
1.2 V internal voltage on VCAP_1/VCAP_2 pins (regulator ON) V12 1.08 1.14 1.2 V VOS[1:0] bits in PWR_CR register = 0x01; max frequency 60 MHz 59
1.2 V internal voltage on VCAP_1/VCAP_2 pins (regulator ON) V12 1.2 1.26 1.32 V VOS[1:0] bits in PWR_CR register = 0x10; max frequency 84 MHz 59
Input voltage on RST and FT pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 59
Input voltage on RST and FT pins VIN -0.3 5.2 V VDD ≤ 2 V 59
Input voltage on BOOT0 pin VIN 0 9 V 59
Power dissipation at TA = 85 °C (range 6) or 105 °C (range 7), UFQFPN48 PD 625 mW TA = 85 °C (range 6) or 105 °C (range 7) 59
Ambient temperature for range 7, maximum power dissipation TA -40 105 °C Range 7, maximum power dissipation 60
Ambient temperature for range 7, low power dissipation TA -40 125 °C Range 7, low power dissipation 60
Junction temperature range TJ -40 125 °C Range 7 60
ESR of external capacitor with available VCAP_1 and VCAP_2 pins ESR 2 Ω with available VCAP_1 and VCAP_2 pins 61
VDD rise time rate (power-up, regulator ON) tVDD 20 µs/V 61
VDD fall time rate (power-down, regulator ON) tVDD 20 µs/V 61
Power-on/power-down reset threshold VPOR/PDR 1.6 1.68 1.76 V Falling edge 62
Power-on/power-down reset threshold VPOR/PDR 1.64 1.72 1.8 V Rising edge 62
Brownout level 1 threshold VBOR1 2.13 2.19 2.24 V Falling edge 62
Brownout level 1 threshold VBOR1 2.23 2.29 2.33 V Rising edge 62
POR reset timing TRSTTEMPO 0.5 1.5 3 ms 63
InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSH 160 200 mA 63
InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSH 5.4 µC VDD = 1.7 V, TA = 125 °C, IRUSH = 171 mA for 31 µs 63
Accuracy of the HSI oscillator ACCHSI -1 1 % Factory calibrated, TA = 25 °C 79
Accuracy of the HSI oscillator ACCHSI -4 4 % Factory calibrated, TA = -10 to 85 °C 79
Accuracy of the HSI oscillator ACCHSI -8 4.5 % Factory calibrated, TA = -40 to 105 °C 79
Accuracy of the HSI oscillator ACCHSI -8 5.5 % Factory calibrated, TA = -40 to 125 °C 79
LSI oscillator frequency fLSI 17 32 47 kHz VDD = 3 V, TA = -40 to 125 °C 80
Oscillator frequency (HSE 4-26 MHz) fOSC_IN 4 26 MHz 77
PLL input clock fPLL_IN 0.95 1 2.1 MHz 81
PLL multiplier output clock fPLL_OUT 24 84 MHz 81
PLL VCO output fVCO_OUT 192 432 MHz 81
Endurance NEND 10 Kcycles TA = -40 to +105 °C (temp. range 7) 86
Low power regulator usage, Flash in Stop mode, all oscillators OFF, no independent watchdog (VDD=3.3 V) IDD_STOP 42 65 µA TA = 25 °C 68
Low power low voltage regulator usage (VDD=3.3 V) IDD_STOP 10 28 µA TA = 25 °C 68
Supply current in Standby mode, low-speed oscillator (LSE) and RTC ON (VDD=3.3 V) IDD_STBY 2.8 5 µA TA = 25 °C 69
Supply current in Standby mode, RTC and LSE OFF (VDD=3.3 V) IDD_STBY 2.1 4 µA TA = 25 °C 69
Voltage-regulator internal voltage on VCAP_1/VCAP_2 external capacitor CEXT 2.2 µF with available VCAP_1 and VCAP_2 pins 61

CAD (KiCad official)

  • Symbol: STM32F401CBU7
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: UFQFPN-48(7x7), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32f401cbu7-etched.step / stm32f401cbu7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f401cbu7.step / stm32f401cbu7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (139 pp, sha256 c38f92aa9d66e8cb, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF