component
STM32F302CCT6TR
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32F302CCT6TR
STMicroelectronics · ST Microelectronics · LQFP-48(7x7)
STM32F302CCT6TR from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup power supply pin that feeds the RTC and backup registers (VBAT supply for RTC and backup registers). |
| 2 | PC13 | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch, which sinks only 3 mA, so output speed must not exceed 2 MHz at 30 pF and it must not drive current sources such as LEDs. |
| 3 | PC14/OSC32_IN | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch, with the 3 mA limit and 2 MHz / 30 pF output restriction, and also serving as the OSC32_IN 32.768 kHz oscillator input. |
| 4 | PC15/OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) supplied through the power switch, with the 3 mA limit and 2 MHz / 30 pF output restriction, and also serving as the OSC32_OUT 32.768 kHz oscillator output. |
| 5 | PF0/OSC_IN | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also functions as the OSC_IN high-speed oscillator input, with alternate functions I2C2_SDA and TIM1_CH3N. |
| 6 | PF1/OSC_OUT | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also functions as the OSC_OUT high-speed oscillator output, with alternate function I2C2_SCL. |
| 7 | NRST | bidirectional | Active-low bidirectional reset pin with embedded weak pull-up, acting as device reset input and internal reset output. |
| 8 | VSSA/VREF- | power_in | Analog ground and negative reference voltage pin for the analog peripherals. |
| 9 | VDDA/VREF+ | power_in | Analog power supply and positive reference voltage pin; on the 48-pin package VREF+ is internally connected to VDDA. |
| 10 | PA0 | bidirectional | 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 1, also providing USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, COMP1_OUT and WKUP1. |
| 11 | PA1 | bidirectional | 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 2, also providing USART2_RTS_DE, TIM2_CH2, TSC_G1_IO2 and OPAMP1_VINP. |
| 12 | PA2 | bidirectional | 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 3, with reduced touch sensing sensitivity recommended for use as a sampling capacitor I/O, also providing USART2_TX, TIM2_CH3 and COMP2_INM. |
| 13 | PA3 | bidirectional | 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 4, also providing USART2_RX, TIM2_CH4, TSC_G1_IO4 and OPAMP1_VINM. |
| 14 | PA4 | bidirectional | 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing SPI1_NSS, SPI3_NSS, I2S3_WS, USART2_CK, TSC_G2_IO1, TIM3_CH2 and DAC1_OUT1 analog output. |
| 15 | PA5 | bidirectional | 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing SPI1_SCK, TIM2_CH1_ETR, TSC_G2_IO2 and ADC2_IN2. |
| 16 | PA6 | bidirectional | 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT and ADC2_IN3. |
| 17 | PA7 | bidirectional | 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 4 on ADC2, also providing SPI1_MOSI, TIM3_CH2, TIM17_CH1, TIM1_CH1N and COMP2_OUT. |
| 18 | PB0 | bidirectional | 3.3 V tolerant I/O (TTa) that also provides TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, COMP4_INP and OPAMP2_VINP. |
| 19 | PB1 | bidirectional | 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing TIM3_CH4, TIM1_CH3N, COMP4_OUT and TSC_G3_IO3. |
| 20 | PB2 | bidirectional | 3.3 V tolerant I/O (TTa) that also provides TSC_G3_IO4, ADC2_IN12 and COMP4_INM. |
| 21 | PB10 | bidirectional | 3.3 V tolerant I/O (TTa) that also provides USART3_TX, TIM2_CH3 and TSC_SYNC. |
| 22 | PB11 | bidirectional | 3.3 V tolerant I/O (TTa) that also provides USART3_RX, TIM2_CH4, TSC_G6_IO1 and COMP6_INP. |
| 23 | VSS | power_in | Digital ground pin for the device. |
| 24 | VDD | power_in | Digital power supply pin for the device. |
| 25 | PB12 | bidirectional | 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN and TSC_G6_IO2. |
| 26 | PB13 | bidirectional | 3.3 V tolerant I/O (TTa) connected directly to the ADC, also providing SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N and TSC_G6_IO3. |
| 27 | PB14 | bidirectional | 3.3 V tolerant I/O (TTa) connected directly to the ADC, also providing SPI2_MISO, I2S2ext_SD, USART3_RTS_DE, TIM1_CH2N, TIM15_CH1 and TSC_G6_IO4. |
| 28 | PB15 | bidirectional | 3.3 V tolerant I/O (TTa) connected directly to the ADC, also providing SPI2_MOSI, I2S2_SD, TIM1_CH3N, RTC_REFIN, TIM15_CH1N and TIM15_CH2. |
| 29 | PA8 | bidirectional | 5 V tolerant I/O (FT) that also provides MCO, I2C2_SMBA, I2S2_MCK, USART1_CK, TIM1_CH1 and TIM4_ETR. |
| 30 | PA9 | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also provides I2C2_SCL, I2S3_MCK, USART1_TX, TIM1_CH2, TIM2_CH3, TIM15_BKIN and TSC_G4_IO1. |
| 31 | PA10 | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also provides I2C2_SDA, USART1_RX, TIM1_CH3, TIM2_CH4, TIM17_BKIN, TSC_G4_IO2 and COMP6_OUT. |
| 32 | PA11 | bidirectional | 5 V tolerant I/O (FT) that also provides USART1_CTS, USB_DM, CAN_RX, TIM1_CH1N, TIM1_CH4, TIM1_BKIN2, TIM4_CH1 and COMP1_OUT. |
| 33 | PA12 | bidirectional | 5 V tolerant I/O (FT) that also provides USART1_RTS_DE, USB_DP, CAN_TX, TIM1_CH2N, TIM1_ETR, TIM4_CH2, TIM16_CH1 and COMP2_OUT. |
| 34 | PA13 | bidirectional | 5 V tolerant I/O (FT) that also provides SWDIO-JTMS, IR_OUT, USART3_CTS, TIM4_CH3, TIM16_CH1N and TSC_G4_IO3. |
| 35 | VSS | power_in | Ground pin for the device. |
| 36 | VDD | power_in | Digital power supply pin for the device. |
| 37 | PA14 | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also provides SWCLK-JTCK, I2C1_SDA, USART2_TX, TIM1_BKIN and TSC_G4_IO4. |
| 38 | PA15 | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also provides JTDI, I2C1_SCL, SPI1_NSS, SPI3_NSS, I2S3_WS, USART2_RX, TIM1_BKIN and TIM2_CH1_ETR. |
| 39 | PB3 | bidirectional | 5 V tolerant I/O (FT) that also provides JTDO-TRACESWO, SPI1_SCK, SPI3_SCK, I2S3_CK, USART2_TX, TIM2_CH2, TIM3_ETR, TIM4_ETR and TSC_G5_IO1. |
| 40 | PB4 | bidirectional | 5 V tolerant I/O (FT) that also provides NJTRST, SPI1_MISO, SPI3_MISO, I2S3ext_SD, USART2_RX, TIM3_CH1, TIM16_CH1, TIM17_BKIN and TSC_G5_IO2. |
| 41 | PB5 | bidirectional | 5 V tolerant I/O (FT) that also provides SPI1_MOSI, SPI3_MOSI, I2S3_SD, I2C1_SMBA, USART2_CK, TIM16_BKIN, TIM3_CH2 and TIM17_CH1. |
| 42 | PB6 | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also provides I2C1_SCL, USART1_TX, TIM16_CH1N, TIM4_CH1 and TSC_G5_IO3. |
| 43 | PB7 | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also provides I2C1_SDA, USART1_RX, TIM3_CH4, TIM4_CH2, TIM17_CH1N and TSC_G5_IO4. |
| 44 | BOOT0 | input | Boot memory selection input pin (dedicated BOOT0 pin). |
| 45 | PB8 | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also provides I2C1_SCL, CAN_RX, TIM16_CH1, TIM4_CH3, TIM1_BKIN, TSC_SYNC and COMP1_OUT. |
| 46 | PB9 | bidirectional | 5 V tolerant FM+ capable I/O (FTf) that also provides I2C1_SDA, CAN_TX, TIM17_CH1, TIM4_CH4, IR_OUT and COMP2_OUT. |
| 47 | VSS | power_in | Ground pin for the device. |
| 48 | VDD | power_in | Digital power supply pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VBAT and VDD) | VDD-VSS | -0.3 | 4 | V | 57 | ||
| Allowed voltage difference for VDD > VDDA | VDD-VDDA | 0.4 | V | 57 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+-VDDA | 0.4 | V | 57 | |||
| Input voltage on FT and FTf pins | VIN | -0.3 | V | Upper limit printed as VDD + 4.0 | 57 | ||
| Input voltage on TTa pins | VIN | -0.3 | 4 | V | 57 | ||
| Input voltage on any other pin | VIN | -0.3 | 4 | V | 57 | ||
| Input voltage on Boot0 pin | VIN | 0 | 9 | V | 57 | ||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 57 | |||
| Variations between all the different ground pins (include VREF-) | /VSSx −VSS/ | 50 | mV | 57 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 160 | mA | 58 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | -160 | mA | 58 | |||
| Maximum current into each VDD power line (source) | IVDD | 100 | mA | 58 | |||
| Maximum current out of each VSS ground line (sink) | IVSS | -100 | mA | 58 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 25 | mA | 58 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | -25 | mA | 58 | |||
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | 80 | mA | 58 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -80 | mA | 58 | |||
| Injected current on FT, FTf and B pins | IINJ(PIN) | -5 | 0 | mA | 58 | ||
| Injected current on TC and RST pin | IINJ(PIN) | -5 | 5 | mA | 58 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 58 | ||
| Maximum junction temperature | TJ | 150 | °C | 58 | |||
| Internal AHB clock frequency | fHCLK | 0 | 72 | MHz | 59 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 36 | MHz | 59 | ||
| Standard operating voltage | VDD | 2 | 3.6 | V | 59 | ||
| Analog operating voltage | VDDA | 2 | 3.6 | V | OPAMP and DAC not used; must be equal to or higher than VDD | 59 | |
| Analog operating voltage | VDDA | 2.4 | 3.6 | V | OPAMP and DAC used | 59 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 59 | ||
| I/O input voltage on FT and FTf I/O | VIN | -0.3 | 5.5 | V | To sustain a voltage higher than VDD+0.3 V, internal pull-up/pull-down must be disabled | 59 | |
| I/O input voltage on BOOT0 | VIN | 0 | 5.5 | V | 59 | ||
| Power dissipation LQFP48 | PD | 364 | mW | TA = 85 °C for suffix 6 | 59 | ||
| Ambient temperature for 6 suffix version | TA | -40 | 85 | °C | Maximum power dissipation | 59 | |
| Junction temperature range, 6 suffix version | TJ | -40 | 105 | °C | 59 | ||
| Power on/power down reset threshold, falling edge | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 60 |
| Power on/power down reset threshold, rising edge | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 60 |
| PDR hysteresis | VPDRhyst | 40 | mV | 60 | |||
| POR reset temporization | tRSTTEMPO | 1.5 | 2.5 | 4.5 | ms | 60 | |
| PVD threshold 0 rising edge | VPVD0 | 2.1 | 2.18 | 2.26 | V | Rising edge | 61 |
| PVD threshold 0 falling edge | VPVD0 | 2 | 2.08 | 2.16 | V | Falling edge | 61 |
| PVD threshold 7 rising edge | VPVD7 | 2.76 | 2.88 | 3 | V | Rising edge | 61 |
| PVD threshold 7 falling edge | VPVD7 | 2.66 | 2.78 | 2.9 | V | Falling edge | 61 |
| PVD hysteresis | VPVDhyst | 100 | mV | 61 | |||
| Internal reference voltage | VREFINT | 1.2 | 1.23 | 1.25 | V | -40 °C < TA < +105 °C | 62 |
| Internal reference voltage | VREFINT | 1.2 | 1.23 | 1.24 | V | -40 °C < TA < +85 °C | 62 |
| Internal reference voltage spread over the temperature range | VRERINT | 10 | mV | VDD = 3 V ±10 mV | 62 | ||
| Temperature coefficient | TCoeff | 100 | ppm/°C | 62 | |||
| ADC sampling time when reading the internal reference voltage | TS_vrefint | 2.2 | µs | 62 | |||
| Supply current in Run mode, executing from Flash | IDD | 61.2 | 67.6 | mA | External clock (HSE bypass), fHCLK 72 MHz, all peripherals enabled, VDD=3.6 V; max at TA 85 °C | 63 | |
| Supply current in Sleep mode, executing from Flash or RAM | IDD | 44 | 49.4 | mA | External clock (HSE bypass), fHCLK 72 MHz, all peripherals enabled, VDD=3.6 V; max at TA 85 °C | 64 | |
| Supply current in Stop mode, regulator in run mode | IDD | 350 | µA | Regulator in run mode, all oscillators OFF; max at TA 85 °C | 65 | ||
| Supply current in Standby mode, LSI and IWDG OFF | IDD | 7.8 | µA | LSI OFF and IWDG OFF; max at TA 85 °C | 65 | ||
| Backup domain supply current, LSE and RTC ON, lower driving capability | IDD_VBAT | 1.5 | µA | LSEDRV[1:0] = '00'; max at TA 85 °C | 66 | ||
| Backup domain supply current, LSE and RTC ON, higher driving capability | IDD_VBAT | 2.2 | µA | LSEDRV[1:0] = '11'; max at TA 85 °C | 66 | ||
| Wakeup time from Stop mode | tWUSTOP | 4.5 | µs | Regulator in run mode | 73 | ||
| Wakeup time from Standby mode | tWUSTANDBY | 100 | µs | LSI and IWDG OFF | 73 | ||
| User external clock source frequency / HSE oscillator frequency | fOSC_IN | 4 | 8 | 32 | MHz | 76 | |
| Feedback resistor | RF | 200 | kΩ | 76 | |||
| PLL multiplier output clock | fPLL_OUT | 16 | 72 | MHz | 81 | ||
| Endurance | NEND | 10 | kcycles | TA = -40 to +85 °C (6 suffix versions) | 81 | ||
| Data retention | tRET | 30 | years | 1 kcycle at TA = 85 °C | 81 | ||
| NRST weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 91 |
CAD (KiCad official)
- Symbol:
STM32F302CCT6TR - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32f302cct6tr-etched.step/stm32f302cct6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f302cct6tr.step/stm32f302cct6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (145 pp, sha256
10a072d58aca58c4, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).