Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F302CCT6TR

STMicroelectronics · ST Microelectronics · LQFP-48(7x7)

STM32F302CCT6TR from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply pin that feeds the RTC and backup registers (VBAT supply for RTC and backup registers).
2 PC13 bidirectional Standard 3.3 V I/O (TC) supplied through the power switch, which sinks only 3 mA, so output speed must not exceed 2 MHz at 30 pF and it must not drive current sources such as LEDs.
3 PC14/OSC32_IN bidirectional Standard 3.3 V I/O (TC) supplied through the power switch, with the 3 mA limit and 2 MHz / 30 pF output restriction, and also serving as the OSC32_IN 32.768 kHz oscillator input.
4 PC15/OSC32_OUT bidirectional Standard 3.3 V I/O (TC) supplied through the power switch, with the 3 mA limit and 2 MHz / 30 pF output restriction, and also serving as the OSC32_OUT 32.768 kHz oscillator output.
5 PF0/OSC_IN bidirectional 5 V tolerant FM+ capable I/O (FTf) that also functions as the OSC_IN high-speed oscillator input, with alternate functions I2C2_SDA and TIM1_CH3N.
6 PF1/OSC_OUT bidirectional 5 V tolerant FM+ capable I/O (FTf) that also functions as the OSC_OUT high-speed oscillator output, with alternate function I2C2_SCL.
7 NRST bidirectional Active-low bidirectional reset pin with embedded weak pull-up, acting as device reset input and internal reset output.
8 VSSA/VREF- power_in Analog ground and negative reference voltage pin for the analog peripherals.
9 VDDA/VREF+ power_in Analog power supply and positive reference voltage pin; on the 48-pin package VREF+ is internally connected to VDDA.
10 PA0 bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 1, also providing USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, COMP1_OUT and WKUP1.
11 PA1 bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 2, also providing USART2_RTS_DE, TIM2_CH2, TSC_G1_IO2 and OPAMP1_VINP.
12 PA2 bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 3, with reduced touch sensing sensitivity recommended for use as a sampling capacitor I/O, also providing USART2_TX, TIM2_CH3 and COMP2_INM.
13 PA3 bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 4, also providing USART2_RX, TIM2_CH4, TSC_G1_IO4 and OPAMP1_VINM.
14 PA4 bidirectional 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing SPI1_NSS, SPI3_NSS, I2S3_WS, USART2_CK, TSC_G2_IO1, TIM3_CH2 and DAC1_OUT1 analog output.
15 PA5 bidirectional 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing SPI1_SCK, TIM2_CH1_ETR, TSC_G2_IO2 and ADC2_IN2.
16 PA6 bidirectional 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM16_CH1, COMP1_OUT and ADC2_IN3.
17 PA7 bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC as fast ADC channel 4 on ADC2, also providing SPI1_MOSI, TIM3_CH2, TIM17_CH1, TIM1_CH1N and COMP2_OUT.
18 PB0 bidirectional 3.3 V tolerant I/O (TTa) that also provides TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, COMP4_INP and OPAMP2_VINP.
19 PB1 bidirectional 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing TIM3_CH4, TIM1_CH3N, COMP4_OUT and TSC_G3_IO3.
20 PB2 bidirectional 3.3 V tolerant I/O (TTa) that also provides TSC_G3_IO4, ADC2_IN12 and COMP4_INM.
21 PB10 bidirectional 3.3 V tolerant I/O (TTa) that also provides USART3_TX, TIM2_CH3 and TSC_SYNC.
22 PB11 bidirectional 3.3 V tolerant I/O (TTa) that also provides USART3_RX, TIM2_CH4, TSC_G6_IO1 and COMP6_INP.
23 VSS power_in Digital ground pin for the device.
24 VDD power_in Digital power supply pin for the device.
25 PB12 bidirectional 3.3 V tolerant I/O (TTa) with reduced touch sensing sensitivity, also providing SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN and TSC_G6_IO2.
26 PB13 bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC, also providing SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N and TSC_G6_IO3.
27 PB14 bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC, also providing SPI2_MISO, I2S2ext_SD, USART3_RTS_DE, TIM1_CH2N, TIM15_CH1 and TSC_G6_IO4.
28 PB15 bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC, also providing SPI2_MOSI, I2S2_SD, TIM1_CH3N, RTC_REFIN, TIM15_CH1N and TIM15_CH2.
29 PA8 bidirectional 5 V tolerant I/O (FT) that also provides MCO, I2C2_SMBA, I2S2_MCK, USART1_CK, TIM1_CH1 and TIM4_ETR.
30 PA9 bidirectional 5 V tolerant FM+ capable I/O (FTf) that also provides I2C2_SCL, I2S3_MCK, USART1_TX, TIM1_CH2, TIM2_CH3, TIM15_BKIN and TSC_G4_IO1.
31 PA10 bidirectional 5 V tolerant FM+ capable I/O (FTf) that also provides I2C2_SDA, USART1_RX, TIM1_CH3, TIM2_CH4, TIM17_BKIN, TSC_G4_IO2 and COMP6_OUT.
32 PA11 bidirectional 5 V tolerant I/O (FT) that also provides USART1_CTS, USB_DM, CAN_RX, TIM1_CH1N, TIM1_CH4, TIM1_BKIN2, TIM4_CH1 and COMP1_OUT.
33 PA12 bidirectional 5 V tolerant I/O (FT) that also provides USART1_RTS_DE, USB_DP, CAN_TX, TIM1_CH2N, TIM1_ETR, TIM4_CH2, TIM16_CH1 and COMP2_OUT.
34 PA13 bidirectional 5 V tolerant I/O (FT) that also provides SWDIO-JTMS, IR_OUT, USART3_CTS, TIM4_CH3, TIM16_CH1N and TSC_G4_IO3.
35 VSS power_in Ground pin for the device.
36 VDD power_in Digital power supply pin for the device.
37 PA14 bidirectional 5 V tolerant FM+ capable I/O (FTf) that also provides SWCLK-JTCK, I2C1_SDA, USART2_TX, TIM1_BKIN and TSC_G4_IO4.
38 PA15 bidirectional 5 V tolerant FM+ capable I/O (FTf) that also provides JTDI, I2C1_SCL, SPI1_NSS, SPI3_NSS, I2S3_WS, USART2_RX, TIM1_BKIN and TIM2_CH1_ETR.
39 PB3 bidirectional 5 V tolerant I/O (FT) that also provides JTDO-TRACESWO, SPI1_SCK, SPI3_SCK, I2S3_CK, USART2_TX, TIM2_CH2, TIM3_ETR, TIM4_ETR and TSC_G5_IO1.
40 PB4 bidirectional 5 V tolerant I/O (FT) that also provides NJTRST, SPI1_MISO, SPI3_MISO, I2S3ext_SD, USART2_RX, TIM3_CH1, TIM16_CH1, TIM17_BKIN and TSC_G5_IO2.
41 PB5 bidirectional 5 V tolerant I/O (FT) that also provides SPI1_MOSI, SPI3_MOSI, I2S3_SD, I2C1_SMBA, USART2_CK, TIM16_BKIN, TIM3_CH2 and TIM17_CH1.
42 PB6 bidirectional 5 V tolerant FM+ capable I/O (FTf) that also provides I2C1_SCL, USART1_TX, TIM16_CH1N, TIM4_CH1 and TSC_G5_IO3.
43 PB7 bidirectional 5 V tolerant FM+ capable I/O (FTf) that also provides I2C1_SDA, USART1_RX, TIM3_CH4, TIM4_CH2, TIM17_CH1N and TSC_G5_IO4.
44 BOOT0 input Boot memory selection input pin (dedicated BOOT0 pin).
45 PB8 bidirectional 5 V tolerant FM+ capable I/O (FTf) that also provides I2C1_SCL, CAN_RX, TIM16_CH1, TIM4_CH3, TIM1_BKIN, TSC_SYNC and COMP1_OUT.
46 PB9 bidirectional 5 V tolerant FM+ capable I/O (FTf) that also provides I2C1_SDA, CAN_TX, TIM17_CH1, TIM4_CH4, IR_OUT and COMP2_OUT.
47 VSS power_in Ground pin for the device.
48 VDD power_in Digital power supply pin for the device.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VBAT and VDD) VDD-VSS -0.3 4 V 57
Allowed voltage difference for VDD > VDDA VDD-VDDA 0.4 V 57
Allowed voltage difference for VREF+ > VDDA VREF+-VDDA 0.4 V 57
Input voltage on FT and FTf pins VIN -0.3 V Upper limit printed as VDD + 4.0 57
Input voltage on TTa pins VIN -0.3 4 V 57
Input voltage on any other pin VIN -0.3 4 V 57
Input voltage on Boot0 pin VIN 0 9 V 57
Variations between different VDD power pins /ΔVDDx/ 50 mV 57
Variations between all the different ground pins (include VREF-) /VSSx −VSS/ 50 mV 57
Total current into sum of all VDD power lines (source) ΣIVDD 160 mA 58
Total current out of sum of all VSS ground lines (sink) ΣIVSS -160 mA 58
Maximum current into each VDD power line (source) IVDD 100 mA 58
Maximum current out of each VSS ground line (sink) IVSS -100 mA 58
Output current sunk by any I/O and control pin IIO(PIN) 25 mA 58
Output current sourced by any I/O and control pin IIO(PIN) -25 mA 58
Total output current sunk by sum of all IOs and control pins ΣIIO(PIN) 80 mA 58
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -80 mA 58
Injected current on FT, FTf and B pins IINJ(PIN) -5 0 mA 58
Injected current on TC and RST pin IINJ(PIN) -5 5 mA 58
Storage temperature range TSTG -65 150 °C 58
Maximum junction temperature TJ 150 °C 58
Internal AHB clock frequency fHCLK 0 72 MHz 59
Internal APB1 clock frequency fPCLK1 0 36 MHz 59
Standard operating voltage VDD 2 3.6 V 59
Analog operating voltage VDDA 2 3.6 V OPAMP and DAC not used; must be equal to or higher than VDD 59
Analog operating voltage VDDA 2.4 3.6 V OPAMP and DAC used 59
Backup operating voltage VBAT 1.65 3.6 V 59
I/O input voltage on FT and FTf I/O VIN -0.3 5.5 V To sustain a voltage higher than VDD+0.3 V, internal pull-up/pull-down must be disabled 59
I/O input voltage on BOOT0 VIN 0 5.5 V 59
Power dissipation LQFP48 PD 364 mW TA = 85 °C for suffix 6 59
Ambient temperature for 6 suffix version TA -40 85 °C Maximum power dissipation 59
Junction temperature range, 6 suffix version TJ -40 105 °C 59
Power on/power down reset threshold, falling edge VPOR/PDR 1.8 1.88 1.96 V Falling edge 60
Power on/power down reset threshold, rising edge VPOR/PDR 1.84 1.92 2 V Rising edge 60
PDR hysteresis VPDRhyst 40 mV 60
POR reset temporization tRSTTEMPO 1.5 2.5 4.5 ms 60
PVD threshold 0 rising edge VPVD0 2.1 2.18 2.26 V Rising edge 61
PVD threshold 0 falling edge VPVD0 2 2.08 2.16 V Falling edge 61
PVD threshold 7 rising edge VPVD7 2.76 2.88 3 V Rising edge 61
PVD threshold 7 falling edge VPVD7 2.66 2.78 2.9 V Falling edge 61
PVD hysteresis VPVDhyst 100 mV 61
Internal reference voltage VREFINT 1.2 1.23 1.25 V -40 °C < TA < +105 °C 62
Internal reference voltage VREFINT 1.2 1.23 1.24 V -40 °C < TA < +85 °C 62
Internal reference voltage spread over the temperature range VRERINT 10 mV VDD = 3 V ±10 mV 62
Temperature coefficient TCoeff 100 ppm/°C 62
ADC sampling time when reading the internal reference voltage TS_vrefint 2.2 µs 62
Supply current in Run mode, executing from Flash IDD 61.2 67.6 mA External clock (HSE bypass), fHCLK 72 MHz, all peripherals enabled, VDD=3.6 V; max at TA 85 °C 63
Supply current in Sleep mode, executing from Flash or RAM IDD 44 49.4 mA External clock (HSE bypass), fHCLK 72 MHz, all peripherals enabled, VDD=3.6 V; max at TA 85 °C 64
Supply current in Stop mode, regulator in run mode IDD 350 µA Regulator in run mode, all oscillators OFF; max at TA 85 °C 65
Supply current in Standby mode, LSI and IWDG OFF IDD 7.8 µA LSI OFF and IWDG OFF; max at TA 85 °C 65
Backup domain supply current, LSE and RTC ON, lower driving capability IDD_VBAT 1.5 µA LSEDRV[1:0] = '00'; max at TA 85 °C 66
Backup domain supply current, LSE and RTC ON, higher driving capability IDD_VBAT 2.2 µA LSEDRV[1:0] = '11'; max at TA 85 °C 66
Wakeup time from Stop mode tWUSTOP 4.5 µs Regulator in run mode 73
Wakeup time from Standby mode tWUSTANDBY 100 µs LSI and IWDG OFF 73
User external clock source frequency / HSE oscillator frequency fOSC_IN 4 8 32 MHz 76
Feedback resistor RF 200 kΩ 76
PLL multiplier output clock fPLL_OUT 16 72 MHz 81
Endurance NEND 10 kcycles TA = -40 to +85 °C (6 suffix versions) 81
Data retention tRET 30 years 1 kcycle at TA = 85 °C 81
NRST weak pull-up equivalent resistor RPU 25 40 55 kΩ VIN = VSS 91

CAD (KiCad official)

  • Symbol: STM32F302CCT6TR
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32f302cct6tr-etched.step / stm32f302cct6tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f302cct6tr.step / stm32f302cct6tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (145 pp, sha256 10a072d58aca58c4, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF