main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stm32f205rct6: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
viewers stm32f205rct6: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/stm32f205rct6 · Ray
stm32f205rct6-etched.fit.json stm32f205rct6: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
stm32f205rct6-etched.glb stm32f205rct6: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
stm32f205rct6-etched.step stm32f205rct6: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
stm32f205rct6-hero.glb stm32f205rct6: hero from the plain model · Ray
stm32f205rct6-hero.overlay.json stm32f205rct6: hero from the plain model · Ray
stm32f205rct6.glb Publish 0.1.0 · Ray
stm32f205rct6.kicad_mod Publish 0.1.0 · Ray
stm32f205rct6.kicad_sym Publish 0.1.0 · Ray
stm32f205rct6.lbr Publish 0.1.0 · Ray
stm32f205rct6.step Publish 0.1.0 · Ray

STM32F205RCT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

STM32F205RCT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Battery supply for RTC, 20×32-bit backup registers, and optional 4 KB backup SRAM; stays powered when VDD is removed.
2 PC13 bidirectional 5 V-tolerant I/O supplied through power switch; output limited to ≤2 MHz and ≤30 pF load (max 3 mA switch current); alternate function RTC_AF1 after first backup-domain power-up.
3 PC14-OSC32_IN bidirectional 5 V-tolerant I/O or 32.768 kHz crystal oscillator input (OSC32_IN); output limited to ≤2 MHz / ≤30 pF; not 5 V-tolerant in oscillator mode.
4 PC15-OSC32_OUT bidirectional 5 V-tolerant I/O or 32.768 kHz crystal oscillator output (OSC32_OUT); output limited to ≤2 MHz / ≤30 pF; not 5 V-tolerant in oscillator mode.
5 PH0-OSC_IN bidirectional 5 V-tolerant I/O or 4-26 MHz high-speed external crystal oscillator input (OSC_IN); not 5 V-tolerant in oscillator mode.
6 PH1-OSC_OUT bidirectional 5 V-tolerant I/O or 4-26 MHz high-speed external crystal oscillator output (OSC_OUT); not 5 V-tolerant in oscillator mode.
7 NRST bidirectional Bidirectional system reset pin with embedded weak pull-up resistor; active-low; filters glitches shorter than the minimum pulse width.
8 PC0 bidirectional 5 V-tolerant I/O with ADC123_IN10 analog input; alternate function OTG_HS_ULPI_STP.
9 PC1 bidirectional 5 V-tolerant I/O with ADC123_IN11 analog input; alternate function ETH_MDC.
10 PC2 bidirectional 5 V-tolerant I/O with ADC123_IN12 analog input; alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, ETH_MII_TXD2.
11 PC3 bidirectional 5 V-tolerant I/O with ADC123_IN13 analog input; alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK.
12 VSSA power_in Analog ground reference for ADC, DAC, and embedded reference voltage; must be tied to VSS.
13 VDDA power_in Analog supply for ADC, DAC, reset block, and RC oscillators; 1.8-3.6 V.
14 PA0-WKUP bidirectional 5 V-tolerant I/O with Standby wake-up (WKUP) and ADC123_IN0 analog input; alternate functions USART2_CTS, UART4_TX, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, ETH_MII_CRS.
15 PA1 bidirectional 5 V-tolerant I/O with ADC123_IN1 analog input; alternate functions USART2_RTS, UART4_RX, ETH_RMII_REF_CLK/ETH_MII_RX_CLK, TIM5_CH2, TIM2_CH2.
16 PA2 bidirectional 5 V-tolerant I/O with ADC123_IN2 analog input; alternate functions USART2_TX, TIM5_CH3, TIM9_CH1, TIM2_CH3, ETH_MDIO.
17 PA3 bidirectional 5 V-tolerant I/O with ADC123_IN3 analog input; alternate functions USART2_RX, TIM5_CH4, TIM9_CH2, TIM2_CH4, OTG_HS_ULPI_D0, ETH_MII_COL.
18 VSS power_in Digital ground supply; 0 V reference for all digital circuitry.
19 VDD power_in Main digital supply; 1.8-3.6 V for I/O buffers and digital core.
20 PA4 bidirectional 3.3 V-tolerant I/O (TTa) with ADC12_IN4 analog input and DAC_OUT1 analog output; alternate functions SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, DCMI_HSYNC, OTG_HS_SOF.
21 PA5 bidirectional 3.3 V-tolerant I/O (TTa) with ADC12_IN5 analog input and DAC_OUT2 analog output; alternate functions SPI1_SCK, OTG_HS_ULPI_CK, TIM2_CH1_ETR, TIM8_CH1N.
22 PA6 bidirectional 5 V-tolerant I/O with ADC12_IN6 analog input; alternate functions SPI1_MISO, TIM8_BKIN, TIM13_CH1, DCMI_PIXCLK, TIM3_CH1, TIM1_BKIN.
23 PA7 bidirectional 5 V-tolerant I/O with ADC12_IN7 analog input; alternate functions SPI1_MOSI, TIM8_CH1N, TIM14_CH1, TIM3_CH2, ETH_MII_RX_DV/ETH_RMII_CRS_DV, TIM1_CH1N.
24 PC4 bidirectional 5 V-tolerant I/O with ADC12_IN14 analog input; alternate functions ETH_RMII_RXD0, ETH_MII_RXD0.
25 PC5 bidirectional 5 V-tolerant I/O with ADC12_IN15 analog input; alternate functions ETH_RMII_RXD1, ETH_MII_RXD1.
26 PB0 bidirectional 5 V-tolerant I/O with ADC12_IN8 analog input; alternate functions TIM3_CH3, TIM8_CH2N, OTG_HS_ULPI_D1, ETH_MII_RXD2, TIM1_CH2N.
27 PB1 bidirectional 5 V-tolerant I/O with ADC12_IN9 analog input; alternate functions TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, ETH_MII_RXD3, TIM1_CH3N.
28 PB2 bidirectional 5 V-tolerant I/O; used with BOOT0 to select boot mode at reset (BOOT1 function).
29 PB10 bidirectional 5 V-tolerant I/O; alternate functions SPI2_SCK/I2S2_SCK, I2C2_SCL, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, TIM2_CH3.
30 PB11 bidirectional 5 V-tolerant I/O; alternate functions I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_RMII_TX_EN/ETH_MII_TX_EN, TIM2_CH4.
31 VCAP_1 passive Internal core-domain LDO output 1; requires 2.2 µF external decoupling capacitor to VSS; must not be connected to VDD.
32 VDD power_in Main digital supply; 1.8-3.6 V for I/O buffers and digital core.
33 PB12 bidirectional 5 V-tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, OTG_HS_ULPI_D5, ETH_RMII_TXD0/ETH_MII_TXD0, OTG_HS_ID.
34 PB13 bidirectional 5 V-tolerant I/O with OTG_HS_VBUS monitor function; alternate functions SPI2_SCK/I2S2_SCK, USART3_CTS, TIM1_CH1N, CAN2_TX, OTG_HS_ULPI_D6, ETH_RMII_TXD1/ETH_MII_TXD1.
35 PB14 bidirectional 5 V-tolerant I/O; alternate functions SPI2_MISO, TIM1_CH2N, TIM12_CH1, OTG_HS_DM, USART3_RTS, TIM8_CH2N.
36 PB15 bidirectional 5 V-tolerant I/O; alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM8_CH3N, TIM12_CH2, OTG_HS_DP, RTC_50Hz.
37 PC6 bidirectional 5 V-tolerant I/O; alternate functions I2S2_MCK, TIM8_CH1, SDIO_D6, USART6_TX, DCMI_D0, TIM3_CH1.
38 PC7 bidirectional 5 V-tolerant I/O; alternate functions I2S3_MCK, TIM8_CH2, SDIO_D7, USART6_RX, DCMI_D1, TIM3_CH2.
39 PC8 bidirectional 5 V-tolerant I/O; alternate functions TIM8_CH3, SDIO_D0, TIM3_CH3, USART6_CK, DCMI_D2.
40 PC9 bidirectional 5 V-tolerant I/O; alternate functions MCO2, I2S2_CKIN/I2S3_CKIN, TIM8_CH4, SDIO_D1, I2C3_SDA, DCMI_D3, TIM3_CH4.
41 PA8 bidirectional 5 V-tolerant I/O; alternate functions MCO1, USART1_CK, TIM1_CH1, I2C3_SCL, OTG_FS_SOF.
42 PA9 bidirectional 5 V-tolerant I/O with OTG_FS_VBUS monitor function; alternate functions USART1_TX, TIM1_CH2, I2C3_SMBA, DCMI_D0.
43 PA10 bidirectional 5 V-tolerant I/O; alternate functions USART1_RX, TIM1_CH3, OTG_FS_ID, DCMI_D1.
44 PA11 bidirectional 5 V-tolerant I/O; alternate functions USART1_CTS, CAN1_RX, TIM1_CH4, OTG_FS_DM.
45 PA12 bidirectional 5 V-tolerant I/O; alternate functions USART1_RTS, CAN1_TX, TIM1_ETR, OTG_FS_DP.
46 PA13 bidirectional 5 V-tolerant I/O; default function JTAG TMS / SWD data I/O (JTMS-SWDIO) active after reset.
47 VCAP_2 passive Internal core-domain LDO output 2; requires 2.2 µF external decoupling capacitor to VSS; must not be connected to VDD.
48 VDD power_in Main digital supply; 1.8-3.6 V for I/O buffers and digital core.
49 PA14 bidirectional 5 V-tolerant I/O; default function JTAG TCK / SWD clock (JTCK-SWCLK) active after reset.
50 PA15 bidirectional 5 V-tolerant I/O; default function JTAG TDI (JTDI) active after reset; alternate functions SPI3_NSS/I2S3_WS, TIM2_CH1_ETR, SPI1_NSS.
51 PC10 bidirectional 5 V-tolerant I/O; alternate functions SPI3_SCK/I2S3_SCK, UART4_TX, SDIO_D2, DCMI_D8, USART3_TX.
52 PC11 bidirectional 5 V-tolerant I/O; alternate functions UART4_RX, SPI3_MISO, SDIO_D3, DCMI_D4, USART3_RX.
53 PC12 bidirectional 5 V-tolerant I/O; alternate functions UART5_TX, SDIO_CK, DCMI_D9, SPI3_MOSI/I2S3_SD, USART3_CK.
54 PD2 bidirectional 5 V-tolerant I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11.
55 PB3 bidirectional 5 V-tolerant I/O; default function JTAG TDO / Trace SWO (JTDO/TRACESWO) active after reset; alternate functions SPI3_SCK/I2S3_SCK, TIM2_CH2, SPI1_SCK.
56 PB4 bidirectional 5 V-tolerant I/O; default function NJTRST active after reset; alternate functions SPI3_MISO, TIM3_CH1, SPI1_MISO.
57 PB5 bidirectional 5 V-tolerant I/O; alternate functions I2C1_SMBA, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, TIM3_CH2, SPI1_MOSI, SPI3_MOSI/I2S3_SD, DCMI_D10.
58 PB6 bidirectional 5 V-tolerant I/O; alternate functions I2C1_SCL, TIM4_CH1, CAN2_TX, DCMI_D5, USART1_TX.
59 PB7 bidirectional 5 V-tolerant I/O; alternate functions I2C1_SDA, FSMC_NL/NADV, DCMI_VSYNC, USART1_RX, TIM4_CH2.
60 BOOT0 input Dedicated BOOT0 input (type I, structure B) for selecting boot mode at reset in combination with BOOT1/PB2; also serves as VPP for Flash programming.
61 PB8 bidirectional 5 V-tolerant I/O; alternate functions TIM4_CH3, SDIO_D4, TIM10_CH1, DCMI_D6, ETH_MII_TXD3, I2C1_SCL, CAN1_RX.
62 PB9 bidirectional 5 V-tolerant I/O; alternate functions SPI2_NSS/I2S2_WS, TIM4_CH4, TIM11_CH1, SDIO_D5, DCMI_D7, I2C1_SDA, CAN1_TX.
63 VSS power_in Digital ground supply; 0 V reference for all digital circuitry.
64 VDD power_in Main digital supply; 1.8-3.6 V for I/O buffers and digital core.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: STM32F205RCT6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32f205rct6-etched.step / stm32f205rct6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f205rct6.step / stm32f205rct6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (179 pp, sha256 6ffebd41462b5c10, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF