main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stm32f103rbt6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers stm32f103rbt6: viewers · Ray
package.json stm32f103rbt6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json stm32f103rbt6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/stm32f103rbt6 · Ray
stm32f103rbt6-etched.fit.json stm32f103rbt6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32f103rbt6-etched.glb stm32f103rbt6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32f103rbt6-etched.step stm32f103rbt6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32f103rbt6.glb Publish 0.1.0 · Ray
stm32f103rbt6.kicad_mod Publish 0.1.0 · Ray
stm32f103rbt6.kicad_sym Publish 0.1.0 · Ray
stm32f103rbt6.lbr Publish 0.1.0 · Ray
stm32f103rbt6.step Publish 0.1.0 · Ray

STM32F103RBT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

STM32F103RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup-domain supply for RTC, 32 kHz oscillator and backup registers; operating range 1.8-3.6 V; sourced through internal power switch when VDD is absent.
2 PC13 bidirectional GPIO; TAMPER-RTC alternate function; supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current.
3 PC14 bidirectional GPIO; OSC32_IN alternate function (32.768 kHz crystal oscillator input); supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current.
4 PC15 bidirectional GPIO; OSC32_OUT alternate function (32.768 kHz crystal oscillator output); supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current.
5 OSC_IN input 4-16 MHz high-speed external crystal oscillator input; PD0 GPIO function (CANRX remap) available only after software remap per Note 7 of Table 5.
6 OSC_OUT output High-speed crystal oscillator output; PD1 GPIO function (CANTX remap) available only after software remap per Note 7 of Table 5.
7 NRST bidirectional Active-low reset pin (I/O per Table 5) with permanent internal pull-up 30-50 kΩ; VIL ≤0.8 V, VIH ≥2 V; pulses <100 ns are filtered; minimum unfiltered reset pulse 300 ns.
8 PC0 bidirectional GPIO (not 5 V tolerant); alternate function ADC12_IN10 analog input, conversion range 0 to VREF+.
9 PC1 bidirectional GPIO (not 5 V tolerant); alternate function ADC12_IN11 analog input.
10 PC2 bidirectional GPIO (not 5 V tolerant); alternate function ADC12_IN12 analog input.
11 PC3 bidirectional GPIO (not 5 V tolerant); alternate function ADC12_IN13 analog input.
12 VSSA power_in Analog ground reference for ADC, reset block, RC oscillators and PLL; must be connected to VSS; VREF− is internally connected to VSSA in LQFP packages.
13 VDDA power_in Analog supply for ADC, reset, RC oscillators and PLL; 2.0-3.6 V (minimum 2.4 V when ADC is used); VREF+ is internally connected to VDDA in LQFP packages.
14 PA0-WKUP bidirectional GPIO (not 5 V tolerant); WKUP wakeup-from-Standby input; alternate functions ADC12_IN0/USART2_CTS/TIM2_CH1_ETR.
15 PA1 bidirectional GPIO (not 5 V tolerant); alternate functions ADC12_IN1/USART2_RTS/TIM2_CH2.
16 PA2 bidirectional GPIO (not 5 V tolerant); alternate functions ADC12_IN2/USART2_TX/TIM2_CH3.
17 PA3 bidirectional GPIO (not 5 V tolerant); alternate functions ADC12_IN3/USART2_RX/TIM2_CH4.
18 VSS_4 power_in Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_4.
19 VDD_4 power_in Digital I/O and internal logic supply, 2.0-3.6 V.
20 PA4 bidirectional GPIO (not 5 V tolerant); alternate functions SPI1_NSS/USART2_CK/ADC12_IN4.
21 PA5 bidirectional GPIO (not 5 V tolerant); alternate functions SPI1_SCK/ADC12_IN5.
22 PA6 bidirectional GPIO (not 5 V tolerant); alternate functions SPI1_MISO/ADC12_IN6/TIM3_CH1; remap TIM1_BKIN.
23 PA7 bidirectional GPIO (not 5 V tolerant); alternate functions SPI1_MOSI/ADC12_IN7/TIM3_CH2; remap TIM1_CH1N.
24 PC4 bidirectional GPIO (not 5 V tolerant); alternate function ADC12_IN14 analog input.
25 PC5 bidirectional GPIO (not 5 V tolerant); alternate function ADC12_IN15 analog input.
26 PB0 bidirectional GPIO (not 5 V tolerant); alternate functions ADC12_IN8/TIM3_CH3; remap TIM1_CH2N.
27 PB1 bidirectional GPIO (not 5 V tolerant); alternate functions ADC12_IN9/TIM3_CH4; remap TIM1_CH3N.
28 PB2 bidirectional 5 V tolerant GPIO; also functions as BOOT1 boot-mode configuration input sampled at reset.
29 PB10 bidirectional 5 V tolerant GPIO; alternate functions I2C2_SCL/USART3_TX; remap TIM2_CH3.
30 PB11 bidirectional 5 V tolerant GPIO; alternate functions I2C2_SDA/USART3_RX; remap TIM2_CH4.
31 VSS_1 power_in Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_1.
32 VDD_1 power_in Digital I/O and internal logic supply, 2.0-3.6 V.
33 PB12 bidirectional 5 V tolerant GPIO; alternate functions SPI2_NSS/I2C2_SMBAl/USART3_CK/TIM1_BKIN.
34 PB13 bidirectional 5 V tolerant GPIO; alternate functions SPI2_SCK/USART3_CTS/TIM1_CH1N.
35 PB14 bidirectional 5 V tolerant GPIO; alternate functions SPI2_MISO/USART3_RTS; remap TIM1_CH2N.
36 PB15 bidirectional 5 V tolerant GPIO; alternate function SPI2_MOSI; remap TIM1_CH3N.
37 PC6 bidirectional 5 V tolerant GPIO; alternate function TIM3_CH1.
38 PC7 bidirectional 5 V tolerant GPIO; alternate function TIM3_CH2.
39 PC8 bidirectional 5 V tolerant GPIO; alternate function TIM3_CH3.
40 PC9 bidirectional 5 V tolerant GPIO; alternate function TIM3_CH4.
41 PA8 bidirectional 5 V tolerant GPIO; alternate functions USART1_CK/TIM1_CH1/MCO (master clock output).
42 PA9 bidirectional 5 V tolerant GPIO; alternate functions USART1_TX/TIM1_CH2.
43 PA10 bidirectional 5 V tolerant GPIO; alternate functions USART1_RX/TIM1_CH3.
44 PA11 bidirectional 5 V tolerant GPIO; alternate functions USART1_CTS/CANRX/USBDM/TIM1_CH4.
45 PA12 bidirectional 5 V tolerant GPIO; alternate functions USART1_RTS/CANTX/USBDP; remap TIM1_ETR.
46 PA13 bidirectional 5 V tolerant GPIO; default function JTMS/SWDIO (JTAG/SWD debug); remappable to PA13 general-purpose I/O.
47 VSS_2 power_in Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_2.
48 VDD_2 power_in Digital I/O and internal logic supply, 2.0-3.6 V.
49 PA14 bidirectional 5 V tolerant GPIO; default function JTCK/SWCLK (JTAG TCK / SWD clock); remappable to PA14 general-purpose I/O.
50 PA15 bidirectional 5 V tolerant GPIO; default function JTDI (JTAG data input); remap TIM2_CH1_ETR/PA15/SPI1_NSS.
51 PC10 bidirectional 5 V tolerant GPIO; alternate function USART3_TX.
52 PC11 bidirectional 5 V tolerant GPIO; alternate function USART3_RX.
53 PC12 bidirectional 5 V tolerant GPIO; alternate function USART3_CK.
54 PD2 bidirectional 5 V tolerant GPIO; alternate function TIM3_ETR (external trigger input).
55 PB3 bidirectional 5 V tolerant GPIO; default function JTDO/TRACESWO; remap TIM2_CH2/PB3/SPI1_SCK.
56 PB4 bidirectional 5 V tolerant GPIO; default function JNTRST (JTAG reset); remap TIM3_CH1/PB4/SPI1_MISO.
57 PB5 bidirectional GPIO (not 5 V tolerant); alternate function I2C1_SMBAl; remap TIM3_CH2/SPI1_MOSI.
58 PB6 bidirectional 5 V tolerant GPIO; alternate functions I2C1_SCL/TIM4_CH1; remap USART1_TX.
59 PB7 bidirectional 5 V tolerant GPIO; alternate functions I2C1_SDA/TIM4_CH2; remap USART1_RX.
60 BOOT0 input Boot mode selection pin sampled at reset; selects boot source (User Flash/System Memory/SRAM); input voltage range 0 to 5.5 V.
61 PB8 bidirectional 5 V tolerant GPIO; alternate function TIM4_CH3; remap I2C1_SCL/CANRX.
62 PB9 bidirectional 5 V tolerant GPIO; alternate function TIM4_CH4; remap I2C1_SDA/CANTX.
63 VSS_3 power_in Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_3.
64 VDD_3 power_in Digital I/O and internal logic supply, 2.0-3.6 V; one 4.7 µF capacitor must be connected to this VDD pin per Figure 14 power supply scheme.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: STM32F103RBT6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32f103rbt6-etched.step / stm32f103rbt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f103rbt6.step / stm32f103rbt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (105 pp, sha256 ceab0f159ae79118, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF