← Commit history

Initial commit: component/stm32f103rbt6

Ray ·d2e2f02ac8 ·
2 files changed +579
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F103RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F103RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup-domain supply for RTC, 32 kHz oscillator and backup registers; operating range 1.8-3.6 V; sourced through internal power switch when VDD is absent. |+| 2 | PC13 | bidirectional | GPIO; TAMPER-RTC alternate function; supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current. |+| 3 | PC14 | bidirectional | GPIO; OSC32_IN alternate function (32.768 kHz crystal oscillator input); supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current. |+| 4 | PC15 | bidirectional | GPIO; OSC32_OUT alternate function (32.768 kHz crystal oscillator output); supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current. |+| 5 | OSC_IN | input | 4-16 MHz high-speed external crystal oscillator input; PD0 GPIO function (CANRX remap) available only after software remap per Note 7 of Table 5. |+| 6 | OSC_OUT | output | High-speed crystal oscillator output; PD1 GPIO function (CANTX remap) available only after software remap per Note 7 of Table 5. |+| 7 | NRST | bidirectional | Active-low reset pin (I/O per Table 5) with permanent internal pull-up 30-50 kΩ; VIL ≤0.8 V, VIH ≥2 V; pulses <100 ns are filtered; minimum unfiltered reset pulse 300 ns. |+| 8 | PC0 | bidirectional | GPIO (not 5 V tolerant); alternate function ADC12_IN10 analog input, conversion range 0 to VREF+. |+| 9 | PC1 | bidirectional | GPIO (not 5 V tolerant); alternate function ADC12_IN11 analog input. |+| 10 | PC2 | bidirectional | GPIO (not 5 V tolerant); alternate function ADC12_IN12 analog input. |+| 11 | PC3 | bidirectional | GPIO (not 5 V tolerant); alternate function ADC12_IN13 analog input. |+| 12 | VSSA | power_in | Analog ground reference for ADC, reset block, RC oscillators and PLL; must be connected to VSS; VREF− is internally connected to VSSA in LQFP packages. |+| 13 | VDDA | power_in | Analog supply for ADC, reset, RC oscillators and PLL; 2.0-3.6 V (minimum 2.4 V when ADC is used); VREF+ is internally connected to VDDA in LQFP packages. |+| 14 | PA0-WKUP | bidirectional | GPIO (not 5 V tolerant); WKUP wakeup-from-Standby input; alternate functions ADC12_IN0/USART2_CTS/TIM2_CH1_ETR. |+| 15 | PA1 | bidirectional | GPIO (not 5 V tolerant); alternate functions ADC12_IN1/USART2_RTS/TIM2_CH2. |+| 16 | PA2 | bidirectional | GPIO (not 5 V tolerant); alternate functions ADC12_IN2/USART2_TX/TIM2_CH3. |+| 17 | PA3 | bidirectional | GPIO (not 5 V tolerant); alternate functions ADC12_IN3/USART2_RX/TIM2_CH4. |+| 18 | VSS_4 | power_in | Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_4. |+| 19 | VDD_4 | power_in | Digital I/O and internal logic supply, 2.0-3.6 V. |+| 20 | PA4 | bidirectional | GPIO (not 5 V tolerant); alternate functions SPI1_NSS/USART2_CK/ADC12_IN4. |+| 21 | PA5 | bidirectional | GPIO (not 5 V tolerant); alternate functions SPI1_SCK/ADC12_IN5. |+| 22 | PA6 | bidirectional | GPIO (not 5 V tolerant); alternate functions SPI1_MISO/ADC12_IN6/TIM3_CH1; remap TIM1_BKIN. |+| 23 | PA7 | bidirectional | GPIO (not 5 V tolerant); alternate functions SPI1_MOSI/ADC12_IN7/TIM3_CH2; remap TIM1_CH1N. |+| 24 | PC4 | bidirectional | GPIO (not 5 V tolerant); alternate function ADC12_IN14 analog input. |+| 25 | PC5 | bidirectional | GPIO (not 5 V tolerant); alternate function ADC12_IN15 analog input. |+| 26 | PB0 | bidirectional | GPIO (not 5 V tolerant); alternate functions ADC12_IN8/TIM3_CH3; remap TIM1_CH2N. |+| 27 | PB1 | bidirectional | GPIO (not 5 V tolerant); alternate functions ADC12_IN9/TIM3_CH4; remap TIM1_CH3N. |+| 28 | PB2 | bidirectional | 5 V tolerant GPIO; also functions as BOOT1 boot-mode configuration input sampled at reset. |+| 29 | PB10 | bidirectional | 5 V tolerant GPIO; alternate functions I2C2_SCL/USART3_TX; remap TIM2_CH3. |+| 30 | PB11 | bidirectional | 5 V tolerant GPIO; alternate functions I2C2_SDA/USART3_RX; remap TIM2_CH4. |+| 31 | VSS_1 | power_in | Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_1. |+| 32 | VDD_1 | power_in | Digital I/O and internal logic supply, 2.0-3.6 V. |+| 33 | PB12 | bidirectional | 5 V tolerant GPIO; alternate functions SPI2_NSS/I2C2_SMBAl/USART3_CK/TIM1_BKIN. |+| 34 | PB13 | bidirectional | 5 V tolerant GPIO; alternate functions SPI2_SCK/USART3_CTS/TIM1_CH1N. |+| 35 | PB14 | bidirectional | 5 V tolerant GPIO; alternate functions SPI2_MISO/USART3_RTS; remap TIM1_CH2N. |+| 36 | PB15 | bidirectional | 5 V tolerant GPIO; alternate function SPI2_MOSI; remap TIM1_CH3N. |+| 37 | PC6 | bidirectional | 5 V tolerant GPIO; alternate function TIM3_CH1. |+| 38 | PC7 | bidirectional | 5 V tolerant GPIO; alternate function TIM3_CH2. |+| 39 | PC8 | bidirectional | 5 V tolerant GPIO; alternate function TIM3_CH3. |+| 40 | PC9 | bidirectional | 5 V tolerant GPIO; alternate function TIM3_CH4. |+| 41 | PA8 | bidirectional | 5 V tolerant GPIO; alternate functions USART1_CK/TIM1_CH1/MCO (master clock output). |+| 42 | PA9 | bidirectional | 5 V tolerant GPIO; alternate functions USART1_TX/TIM1_CH2. |+| 43 | PA10 | bidirectional | 5 V tolerant GPIO; alternate functions USART1_RX/TIM1_CH3. |+| 44 | PA11 | bidirectional | 5 V tolerant GPIO; alternate functions USART1_CTS/CANRX/USBDM/TIM1_CH4. |+| 45 | PA12 | bidirectional | 5 V tolerant GPIO; alternate functions USART1_RTS/CANTX/USBDP; remap TIM1_ETR. |+| 46 | PA13 | bidirectional | 5 V tolerant GPIO; default function JTMS/SWDIO (JTAG/SWD debug); remappable to PA13 general-purpose I/O. |+| 47 | VSS_2 | power_in | Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_2. |+| 48 | VDD_2 | power_in | Digital I/O and internal logic supply, 2.0-3.6 V. |+| 49 | PA14 | bidirectional | 5 V tolerant GPIO; default function JTCK/SWCLK (JTAG TCK / SWD clock); remappable to PA14 general-purpose I/O. |+| 50 | PA15 | bidirectional | 5 V tolerant GPIO; default function JTDI (JTAG data input); remap TIM2_CH1_ETR/PA15/SPI1_NSS. |+| 51 | PC10 | bidirectional | 5 V tolerant GPIO; alternate function USART3_TX. |+| 52 | PC11 | bidirectional | 5 V tolerant GPIO; alternate function USART3_RX. |+| 53 | PC12 | bidirectional | 5 V tolerant GPIO; alternate function USART3_CK. |+| 54 | PD2 | bidirectional | 5 V tolerant GPIO; alternate function TIM3_ETR (external trigger input). |+| 55 | PB3 | bidirectional | 5 V tolerant GPIO; default function JTDO/TRACESWO; remap TIM2_CH2/PB3/SPI1_SCK. |+| 56 | PB4 | bidirectional | 5 V tolerant GPIO; default function JNTRST (JTAG reset); remap TIM3_CH1/PB4/SPI1_MISO. |+| 57 | PB5 | bidirectional | GPIO (not 5 V tolerant); alternate function I2C1_SMBAl; remap TIM3_CH2/SPI1_MOSI. |+| 58 | PB6 | bidirectional | 5 V tolerant GPIO; alternate functions I2C1_SCL/TIM4_CH1; remap USART1_TX. |+| 59 | PB7 | bidirectional | 5 V tolerant GPIO; alternate functions I2C1_SDA/TIM4_CH2; remap USART1_RX. |+| 60 | BOOT0 | input | Boot mode selection pin sampled at reset; selects boot source (User Flash/System Memory/SRAM); input voltage range 0 to 5.5 V. |+| 61 | PB8 | bidirectional | 5 V tolerant GPIO; alternate function TIM4_CH3; remap I2C1_SCL/CANRX. |+| 62 | PB9 | bidirectional | 5 V tolerant GPIO; alternate function TIM4_CH4; remap I2C1_SDA/CANTX. |+| 63 | VSS_3 | power_in | Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_3. |+| 64 | VDD_3 | power_in | Digital I/O and internal logic supply, 2.0-3.6 V; one 4.7 µF capacitor must be connected to this VDD pin per Figure 14 power supply scheme. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F103RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f103rbt6-etched.step` / `stm32f103rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f103rbt6.step` / `stm32f103rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579708237085794304) (105 pp, sha256 `ceab0f159ae79118`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f103rbt6-datasheet.pdf)
page.jsonadded+479
@@ -0,0 +1,479 @@+{+  "slug": "stm32f103rbt6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f103rbt6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f103rbt6.kicad_sym",+    "stm32f103rbt6.kicad_mod",+    "stm32f103rbt6.glb",+    "stm32f103rbt6.step",+    "stm32f103rbt6.lbr",+    "docs/hero.png",+    "docs/stm32f103rbt6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F103RBT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579708237085794304",+    "parts": {+      "symbol": "stm32f103rbt6.kicad_sym",+      "footprint": "stm32f103rbt6.kicad_mod",+      "model_3d": "stm32f103rbt6-etched.glb",+      "model_3d_plain": "stm32f103rbt6.glb",+      "model_3d_step": "stm32f103rbt6-etched.step",+      "model_3d_step_plain": "stm32f103rbt6.step",+      "lbr": "stm32f103rbt6.lbr"+    },+    "distributor_links": {+      "lcsc": "C8735"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup-domain supply for RTC, 32 kHz oscillator and backup registers; operating range 1.8-3.6 V; sourced through internal power switch when VDD is absent."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "GPIO; TAMPER-RTC alternate function; supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current."+      },+      {+        "number": "3",+        "name": "PC14",+        "type": "bidirectional",+        "description": "GPIO; OSC32_IN alternate function (32.768 kHz crystal oscillator input); supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current."+      },+      {+        "number": "4",+        "name": "PC15",+        "type": "bidirectional",+        "description": "GPIO; OSC32_OUT alternate function (32.768 kHz crystal oscillator output); supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current."+      },+      {+        "number": "5",+        "name": "OSC_IN",+        "type": "input",+        "description": "4-16 MHz high-speed external crystal oscillator input; PD0 GPIO function (CANRX remap) available only after software remap per Note 7 of Table 5."+      },+      {+        "number": "6",+        "name": "OSC_OUT",+        "type": "output",+        "description": "High-speed crystal oscillator output; PD1 GPIO function (CANTX remap) available only after software remap per Note 7 of Table 5."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Active-low reset pin (I/O per Table 5) with permanent internal pull-up 30-50 kΩ; VIL ≤0.8 V, VIH ≥2 V; pulses <100 ns are filtered; minimum unfiltered reset pulse 300 ns."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate function ADC12_IN10 analog input, conversion range 0 to VREF+."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate function ADC12_IN11 analog input."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate function ADC12_IN12 analog input."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate function ADC12_IN13 analog input."+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground reference for ADC, reset block, RC oscillators and PLL; must be connected to VSS; VREF− is internally connected to VSSA in LQFP packages."+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply for ADC, reset, RC oscillators and PLL; 2.0-3.6 V (minimum 2.4 V when ADC is used); VREF+ is internally connected to VDDA in LQFP packages."+      },+      {+        "number": "14",+        "name": "PA0-WKUP",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); WKUP wakeup-from-Standby input; alternate functions ADC12_IN0/USART2_CTS/TIM2_CH1_ETR."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate functions ADC12_IN1/USART2_RTS/TIM2_CH2."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate functions ADC12_IN2/USART2_TX/TIM2_CH3."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate functions ADC12_IN3/USART2_RX/TIM2_CH4."+      },+      {+        "number": "18",+        "name": "VSS_4",+        "type": "power_in",+        "description": "Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_4."+      },+      {+        "number": "19",+        "name": "VDD_4",+        "type": "power_in",+        "description": "Digital I/O and internal logic supply, 2.0-3.6 V."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate functions SPI1_NSS/USART2_CK/ADC12_IN4."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate functions SPI1_SCK/ADC12_IN5."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate functions SPI1_MISO/ADC12_IN6/TIM3_CH1; remap TIM1_BKIN."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate functions SPI1_MOSI/ADC12_IN7/TIM3_CH2; remap TIM1_CH1N."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate function ADC12_IN14 analog input."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate function ADC12_IN15 analog input."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate functions ADC12_IN8/TIM3_CH3; remap TIM1_CH2N."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate functions ADC12_IN9/TIM3_CH4; remap TIM1_CH3N."+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; also functions as BOOT1 boot-mode configuration input sampled at reset."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions I2C2_SCL/USART3_TX; remap TIM2_CH3."+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions I2C2_SDA/USART3_RX; remap TIM2_CH4."+      },+      {+        "number": "31",+        "name": "VSS_1",+        "type": "power_in",+        "description": "Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_1."+      },+      {+        "number": "32",+        "name": "VDD_1",+        "type": "power_in",+        "description": "Digital I/O and internal logic supply, 2.0-3.6 V."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions SPI2_NSS/I2C2_SMBAl/USART3_CK/TIM1_BKIN."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions SPI2_SCK/USART3_CTS/TIM1_CH1N."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions SPI2_MISO/USART3_RTS; remap TIM1_CH2N."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function SPI2_MOSI; remap TIM1_CH3N."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function TIM3_CH1."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function TIM3_CH2."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function TIM3_CH3."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function TIM3_CH4."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions USART1_CK/TIM1_CH1/MCO (master clock output)."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions USART1_TX/TIM1_CH2."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions USART1_RX/TIM1_CH3."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions USART1_CTS/CANRX/USBDM/TIM1_CH4."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions USART1_RTS/CANTX/USBDP; remap TIM1_ETR."+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; default function JTMS/SWDIO (JTAG/SWD debug); remappable to PA13 general-purpose I/O."+      },+      {+        "number": "47",+        "name": "VSS_2",+        "type": "power_in",+        "description": "Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_2."+      },+      {+        "number": "48",+        "name": "VDD_2",+        "type": "power_in",+        "description": "Digital I/O and internal logic supply, 2.0-3.6 V."+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; default function JTCK/SWCLK (JTAG TCK / SWD clock); remappable to PA14 general-purpose I/O."+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; default function JTDI (JTAG data input); remap TIM2_CH1_ETR/PA15/SPI1_NSS."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function USART3_TX."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function USART3_RX."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function USART3_CK."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function TIM3_ETR (external trigger input)."+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; default function JTDO/TRACESWO; remap TIM2_CH2/PB3/SPI1_SCK."+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; default function JNTRST (JTAG reset); remap TIM3_CH1/PB4/SPI1_MISO."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO (not 5 V tolerant); alternate function I2C1_SMBAl; remap TIM3_CH2/SPI1_MOSI."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions I2C1_SCL/TIM4_CH1; remap USART1_TX."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate functions I2C1_SDA/TIM4_CH2; remap USART1_RX."+      },+      {+        "number": "60",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot mode selection pin sampled at reset; selects boot source (User Flash/System Memory/SRAM); input voltage range 0 to 5.5 V."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function TIM4_CH3; remap I2C1_SCL/CANRX."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5 V tolerant GPIO; alternate function TIM4_CH4; remap I2C1_SDA/CANTX."+      },+      {+        "number": "63",+        "name": "VSS_3",+        "type": "power_in",+        "description": "Digital ground supply pin; decoupling capacitor (100 nF recommended) to adjacent VDD_3."+      },+      {+        "number": "64",+        "name": "VDD_3",+        "type": "power_in",+        "description": "Digital I/O and internal logic supply, 2.0-3.6 V; one 4.7 µF capacitor must be connected to this VDD pin per Figure 14 power supply scheme."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: PC13, PC14, PC15 have current limitations (3 mA max sink/source, speed limited to 2 MHz with 30 pF m; Pins 5 and 6 (OSC_IN/OSC_OUT) are configured for oscillator by default but can be remapped to PD0/PD; No separate VREF- or VREF+ pins on LQFP64 package; these are internally connected per Table 46 note "+        ],+        "pages_sent": 105,+        "cost_usd": 1.0982,+        "at": "2026-09-22T13:42:22"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579708237085794304",+        "pages": 105,+        "sha256": "ceab0f159ae79118",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file