component
STM32F103RBT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Also listed as STM32F103RBT6TR
← Commit history
stm32f103rbt6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+90−10
package.json+48−8@@ -59,19 +59,19 @@ "number": "2", "name": "PC13", "type": "bidirectional",- "description": "GPIO; TAMPER-RTC alternate function; supplied through power switch, output limited to \u22642 MHz speed, \u226430 pF load, and \u00b13 mA maximum current."+ "description": "GPIO; TAMPER-RTC alternate function; supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current." }, { "number": "3", "name": "PC14", "type": "bidirectional",- "description": "GPIO; OSC32_IN alternate function (32.768 kHz crystal oscillator input); supplied through power switch, output limited to \u22642 MHz speed, \u226430 pF load, and \u00b13 mA maximum current."+ "description": "GPIO; OSC32_IN alternate function (32.768 kHz crystal oscillator input); supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current." }, { "number": "4", "name": "PC15", "type": "bidirectional",- "description": "GPIO; OSC32_OUT alternate function (32.768 kHz crystal oscillator output); supplied through power switch, output limited to \u22642 MHz speed, \u226430 pF load, and \u00b13 mA maximum current."+ "description": "GPIO; OSC32_OUT alternate function (32.768 kHz crystal oscillator output); supplied through power switch, output limited to ≤2 MHz speed, ≤30 pF load, and ±3 mA maximum current." }, { "number": "5",@@ -89,7 +89,7 @@ "number": "7", "name": "NRST", "type": "bidirectional",- "description": "Active-low reset pin (I/O per Table 5) with permanent internal pull-up 30-50 k\u03a9; VIL \u22640.8 V, VIH \u22652 V; pulses <100 ns are filtered; minimum unfiltered reset pulse 300 ns."+ "description": "Active-low reset pin (I/O per Table 5) with permanent internal pull-up 30-50 kΩ; VIL ≤0.8 V, VIH ≥2 V; pulses <100 ns are filtered; minimum unfiltered reset pulse 300 ns." }, { "number": "8",@@ -119,7 +119,7 @@ "number": "12", "name": "VSSA", "type": "power_in",- "description": "Analog ground reference for ADC, reset block, RC oscillators and PLL; must be connected to VSS; VREF\u2212 is internally connected to VSSA in LQFP packages."+ "description": "Analog ground reference for ADC, reset block, RC oscillators and PLL; must be connected to VSS; VREF− is internally connected to VSSA in LQFP packages." }, { "number": "13",@@ -431,7 +431,7 @@ "number": "64", "name": "VDD_3", "type": "power_in",- "description": "Digital I/O and internal logic supply, 2.0-3.6 V; one 4.7 \u00b5F capacitor must be connected to this VDD pin per Figure 14 power supply scheme."+ "description": "Digital I/O and internal logic supply, 2.0-3.6 V; one 4.7 µF capacitor must be connected to this VDD pin per Figure 14 power supply scheme." } ], "provenance": {@@ -468,6 +468,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "stm32f103rbt6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f103rbt6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "256b85cd402ed7e48fbfb209fa62c3c40bdfb127f04e04ee973c1da522ae011a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -453,7 +453,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "stm32f103rbt6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32f103rbt6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "256b85cd402ed7e48fbfb209fa62c3c40bdfb127f04e04ee973c1da522ae011a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -501,4 +541,4 @@ "public": true }, "updated_at": "2026-09-25T08:42:51.550Z"-}+}