main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stm32f103c8t7: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers stm32f103c8t7: viewers · Ray
package.json stm32f103c8t7: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json stm32f103c8t7: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/stm32f103c8t7 · Ray
stm32f103c8t7-etched.fit.json stm32f103c8t7: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32f103c8t7-etched.glb stm32f103c8t7: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32f103c8t7-etched.step stm32f103c8t7: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32f103c8t7.glb Publish 0.1.0 · Ray
stm32f103c8t7.kicad_mod Publish 0.1.0 · Ray
stm32f103c8t7.kicad_sym Publish 0.1.0 · Ray
stm32f103c8t7.lbr Publish 0.1.0 · Ray
stm32f103c8t7.step Publish 0.1.0 · Ray

STM32F103C8T7

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

STM32F103C8T7 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Power supply for RTC, external 32 kHz oscillator and backup registers (through power switch) when VDD is not present; VBAT = 1.8 to 3.6 V.
2 PC13-TAMPER-RTC bidirectional GPIO port C bit 13, shared with TAMPER-RTC alternate function; supplied through the backup power switch (3 mA max sink/source), output speed limited to 2 MHz with 30 pF load and must not be used as a current source.
3 PC14-OSC32_IN bidirectional GPIO port C bit 14, main function after first backup domain power-up; alternate function OSC32_IN (32.768 kHz RTC crystal input); supplied through the backup power switch (3 mA max, 2 MHz max output speed).
4 PC15-OSC32_OUT bidirectional GPIO port C bit 15, main function after first backup domain power-up; alternate function OSC32_OUT (32.768 kHz RTC crystal output); supplied through the backup power switch (3 mA max, 2 MHz max output speed).
5 OSC_IN input Input of the 4-16 MHz high-speed external (HSE) crystal/ceramic resonator oscillator; can be remapped by software to GPIO PD0 (limited to 50 MHz in output mode).
6 OSC_OUT output Output of the 4-16 MHz high-speed external (HSE) crystal/ceramic resonator oscillator; can be remapped by software to GPIO PD1 (limited to 50 MHz in output mode).
7 NRST bidirectional Active-low system reset input/output with a permanent internal pull-up resistor (RPU) to VDD; a low level on this pin generates a device reset.
8 VSSA power_in Analog ground supply for the ADC, reset blocks, RC oscillators and PLL; must be connected to VSS.
9 VDDA power_in External analog power supply for ADC, reset blocks, RC oscillators and PLL, 2.0 to 3.6 V (minimum 2.4 V when the ADC is used); must be connected to VDD.
10 PA0-WKUP bidirectional GPIO port A bit 0, 5 V tolerant; alternate functions WKUP (standby wakeup), USART2_CTS, ADC12_IN0, TIM2_CH1_ETR.
11 PA1 bidirectional GPIO port A bit 1, 5 V tolerant; alternate functions USART2_RTS, ADC12_IN1, TIM2_CH2.
12 PA2 bidirectional GPIO port A bit 2, 5 V tolerant; alternate functions USART2_TX, ADC12_IN2, TIM2_CH3.
13 PA3 bidirectional GPIO port A bit 3, 5 V tolerant; alternate functions USART2_RX, ADC12_IN3, TIM2_CH4.
14 PA4 bidirectional GPIO port A bit 4, 5 V tolerant; alternate functions SPI1_NSS, USART2_CK, ADC12_IN4.
15 PA5 bidirectional GPIO port A bit 5, 5 V tolerant; alternate functions SPI1_SCK, ADC12_IN5.
16 PA6 bidirectional GPIO port A bit 6, 5 V tolerant; default alternate functions SPI1_MISO, ADC12_IN6, TIM3_CH1, remappable to TIM1_BKIN.
17 PA7 bidirectional GPIO port A bit 7, 5 V tolerant; default alternate functions SPI1_MOSI, ADC12_IN7, TIM3_CH2, remappable to TIM1_CH1N.
18 PB0 bidirectional GPIO port B bit 0, 5 V tolerant; default alternate functions ADC12_IN8, TIM3_CH3, remappable to TIM1_CH2N.
19 PB1 bidirectional GPIO port B bit 1, 5 V tolerant; default alternate functions ADC12_IN9, TIM3_CH4, remappable to TIM1_CH3N.
20 PB2/BOOT1 bidirectional GPIO port B bit 2, 5 V tolerant, shared with BOOT1; sampled together with BOOT0 at reset to select the boot mode (Flash, System memory or SRAM).
21 PB10 bidirectional GPIO port B bit 10, 5 V tolerant; default alternate functions I2C2_SCL, USART3_TX, remappable to TIM2_CH3.
22 PB11 bidirectional GPIO port B bit 11, 5 V tolerant; default alternate functions I2C2_SDA, USART3_RX, remappable to TIM2_CH4.
23 VSS_1 power_in Digital ground supply pin.
24 VDD_1 power_in External digital power supply pin, 2.0 to 3.6 V, for I/Os and internal regulator.
25 PB12 bidirectional GPIO port B bit 12, 5 V tolerant; alternate functions SPI2_NSS, I2C2_SMBAl, USART3_CK, TIM1_BKIN.
26 PB13 bidirectional GPIO port B bit 13, 5 V tolerant; alternate functions SPI2_SCK, USART3_CTS, TIM1_CH1N.
27 PB14 bidirectional GPIO port B bit 14, 5 V tolerant; alternate functions SPI2_MISO, USART3_RTS, TIM1_CH2N.
28 PB15 bidirectional GPIO port B bit 15, 5 V tolerant; alternate functions SPI2_MOSI, TIM1_CH3N.
29 PA8 bidirectional GPIO port A bit 8, 5 V tolerant; alternate functions USART1_CK, TIM1_CH1, MCO.
30 PA9 bidirectional GPIO port A bit 9, 5 V tolerant; alternate functions USART1_TX, TIM1_CH2.
31 PA10 bidirectional GPIO port A bit 10, 5 V tolerant; alternate functions USART1_RX, TIM1_CH3.
32 PA11 bidirectional GPIO port A bit 11, 5 V tolerant; alternate functions USART1_CTS, CANRX, USBDM, TIM1_CH4.
33 PA12 bidirectional GPIO port A bit 12, 5 V tolerant; alternate functions USART1_RTS, CANTX, USBDP, TIM1_ETR.
34 PA13 bidirectional GPIO port A bit 13, 5 V tolerant; default function JTMS/SWDIO debug interface pin.
35 VSS_2 power_in Digital ground supply pin.
36 VDD_2 power_in External digital power supply pin, 2.0 to 3.6 V, for I/Os and internal regulator.
37 PA14 bidirectional GPIO port A bit 14, 5 V tolerant; default function JTCK/SWCLK debug interface pin.
38 PA15 bidirectional GPIO port A bit 15, 5 V tolerant; default function JTDI, remappable to TIM2_CH1_ETR/SPI1_NSS.
39 PB3 bidirectional GPIO port B bit 3, 5 V tolerant; default function JTDO, remappable to TIM2_CH2/TRACESWO/SPI1_SCK.
40 PB4 bidirectional GPIO port B bit 4, 5 V tolerant; default function JNTRST, remappable to TIM3_CH1/SPI1_MISO.
41 PB5 bidirectional GPIO port B bit 5 (standard, not 5 V tolerant); default alternate function I2C1_SMBAl, remappable to TIM3_CH2/SPI1_MOSI.
42 PB6 bidirectional GPIO port B bit 6, 5 V tolerant; default alternate functions I2C1_SCL, TIM4_CH1, remappable to USART1_TX.
43 PB7 bidirectional GPIO port B bit 7, 5 V tolerant; default alternate functions I2C1_SDA, TIM4_CH2, remappable to USART1_RX.
44 BOOT0 input Boot mode selection pin, sampled together with BOOT1 (PB2) at reset to select boot from user Flash, system memory or embedded SRAM.
45 PB8 bidirectional GPIO port B bit 8, 5 V tolerant; default alternate function TIM4_CH3, remappable to I2C1_SCL/CANRX.
46 PB9 bidirectional GPIO port B bit 9, 5 V tolerant; default alternate function TIM4_CH4, remappable to I2C1_SDA/CANTX.
47 VSS_3 power_in Digital ground supply pin.
48 VDD_3 power_in External digital power supply pin, 2.0 to 3.6 V, for I/Os and internal regulator; the 4.7 µF decoupling capacitor must be connected to this VDD3 pin.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

CAD (KiCad official)

  • Symbol: STM32F103C8T7
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32f103c8t7-etched.step / stm32f103c8t7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f103c8t7.step / stm32f103c8t7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (117 pp, sha256 4741c03c5793745c, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF