main
Ray Publish 0.1.0 6cdf830
{
  "slug": "stm32f100cbt7btr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics ST Microelectronics, LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "stm32f100cbt7btr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm32f100cbt7btr.kicad_sym",
    "stm32f100cbt7btr.kicad_mod",
    "stm32f100cbt7btr.glb",
    "stm32f100cbt7btr.step",
    "stm32f100cbt7btr.lbr",
    "docs/hero.png",
    "docs/stm32f100cbt7btr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stm32f100cbt7btr-hero.glb",
    "stm32f100cbt7btr-hero.overlay.json"
  ],
  "component": {
    "mpn": "STM32F100CBT7BTR",
    "manufacturer": "STMicroelectronics",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Embedded Processors & Controllers",
    "subcategory": "ST Microelectronics",
    "datasheet": "https://www.st.com/content/ccc/resource/technical/document/datasheet/dd/87/fd/2a/fb/3f/48/5c/CD00251732.pdf/files/CD00251732.pdf/jcr:content/translations/en.CD00251732.pdf",
    "parts": {
      "symbol": "stm32f100cbt7btr.kicad_sym",
      "footprint": "stm32f100cbt7btr.kicad_mod",
      "model_3d": "stm32f100cbt7btr-hero.glb",
      "model_3d_plain": "stm32f100cbt7btr.glb",
      "model_3d_step": "stm32f100cbt7btr-etched.step",
      "model_3d_step_plain": "stm32f100cbt7btr.step",
      "lbr": "stm32f100cbt7btr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2053325",
      "digikey": "497-18987-2-ND",
      "mouser": "511-STM32F100CBT7BTR"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T15:37:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-18987-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "511-STM32F100CBT7BTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VBAT",
        "type": "power_in",
        "description": "Backup power supply for the RTC and backup registers."
      },
      {
        "number": "2",
        "name": "PC13-TAMPER-RTC",
        "type": "bidirectional",
        "description": "GPIO PC13 (also TAMPER-RTC) is supplied through the power switch, which sinks only 3 mA, so output use is limited to 2 MHz with a 30 pF maximum load and the pin must not source current such as driving an LED."
      },
      {
        "number": "3",
        "name": "PC14-OSC32_IN",
        "type": "bidirectional",
        "description": "GPIO PC14 (also 32 kHz oscillator input OSC32_IN) is supplied through the power switch, so output use is limited to 2 MHz with a 30 pF maximum load and the pin must not source current."
      },
      {
        "number": "4",
        "name": "PC15-OSC32_OUT",
        "type": "bidirectional",
        "description": "GPIO PC15 (also 32 kHz oscillator output OSC32_OUT) is supplied through the power switch, so output use is limited to 2 MHz with a 30 pF maximum load and the pin must not source current."
      },
      {
        "number": "5",
        "name": "OSC_IN",
        "type": "input",
        "description": "External high-speed oscillator input (4-24 MHz crystal), configured as OSC_IN after reset, with PD0 remappable onto this pin by software."
      },
      {
        "number": "6",
        "name": "OSC_OUT",
        "type": "output",
        "description": "External high-speed oscillator output (4-24 MHz crystal), configured as OSC_OUT after reset, with PD1 remappable onto this pin by software."
      },
      {
        "number": "7",
        "name": "NRST",
        "type": "bidirectional",
        "description": "Device reset pin, listed as I/O in Table 4; its electrical characteristics are given in section 5.3.14."
      },
      {
        "number": "8",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground; the ADC conversion range of 0 to VREF+ assumes VSSA is tied to ground."
      },
      {
        "number": "9",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog supply for the ADC, DAC and temperature sensor, with a VDDA range of 2.4 V to 3.6 V for the ADC."
      },
      {
        "number": "10",
        "name": "PA0-WKUP",
        "type": "bidirectional",
        "description": "GPIO PA0 (not 5 V tolerant) with alternate functions WKUP, USART2_CTS, ADC1_IN0 and TIM2_CH1_ETR."
      },
      {
        "number": "11",
        "name": "PA1",
        "type": "bidirectional",
        "description": "GPIO PA1 (not 5 V tolerant) with alternate functions USART2_RTS, ADC1_IN1 and TIM2_CH2."
      },
      {
        "number": "12",
        "name": "PA2",
        "type": "bidirectional",
        "description": "GPIO PA2 (not 5 V tolerant) with alternate functions USART2_TX, ADC1_IN2, TIM2_CH3 and TIM15_CH1."
      },
      {
        "number": "13",
        "name": "PA3",
        "type": "bidirectional",
        "description": "GPIO PA3 (not 5 V tolerant) with alternate functions USART2_RX, ADC1_IN3, TIM2_CH4 and TIM15_CH2."
      },
      {
        "number": "14",
        "name": "PA4",
        "type": "bidirectional",
        "description": "GPIO PA4 (not 5 V tolerant) with alternate functions SPI1_NSS, ADC1_IN4, USART2_CK and DAC1_OUT."
      },
      {
        "number": "15",
        "name": "PA5",
        "type": "bidirectional",
        "description": "GPIO PA5 (not 5 V tolerant) with alternate functions SPI1_SCK, ADC1_IN5 and DAC2_OUT."
      },
      {
        "number": "16",
        "name": "PA6",
        "type": "bidirectional",
        "description": "GPIO PA6 (not 5 V tolerant) with alternate functions SPI1_MISO, ADC1_IN6, TIM3_CH1, and remap TIM1_BKIN and TIM16_CH1."
      },
      {
        "number": "17",
        "name": "PA7",
        "type": "bidirectional",
        "description": "GPIO PA7 (not 5 V tolerant) with alternate functions SPI1_MOSI, ADC1_IN7 and TIM3_CH2, and remap TIM1_CH1N and TIM17_CH1."
      },
      {
        "number": "18",
        "name": "PB0",
        "type": "bidirectional",
        "description": "GPIO PB0 (not 5 V tolerant) with alternate functions ADC1_IN8 and TIM3_CH3, and remap TIM1_CH2N."
      },
      {
        "number": "19",
        "name": "PB1",
        "type": "bidirectional",
        "description": "GPIO PB1 (not 5 V tolerant) with alternate functions ADC1_IN9 and TIM3_CH4, and remap TIM1_CH3N."
      },
      {
        "number": "20",
        "name": "PB2/BOOT1",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB2, also used as the BOOT1 boot-mode input."
      },
      {
        "number": "21",
        "name": "PB10",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB10 with alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and HDMI_CEC."
      },
      {
        "number": "22",
        "name": "PB11",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB11 with alternate functions I2C2_SDA, USART3_RX and TIM2_CH4."
      },
      {
        "number": "23",
        "name": "VSS_1",
        "type": "power_in",
        "description": "Ground pin for the digital supply domain."
      },
      {
        "number": "24",
        "name": "VDD_1",
        "type": "power_in",
        "description": "Digital supply pin; application supply and I/Os are specified from 2.0 V to 3.6 V."
      },
      {
        "number": "25",
        "name": "PB12",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB12 with alternate functions SPI2_NSS, I2C2_SMBA, TIM1_BKIN and USART3_CK."
      },
      {
        "number": "26",
        "name": "PB13",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB13 with alternate functions SPI2_SCK, TIM1_CH1N and USART3_CTS."
      },
      {
        "number": "27",
        "name": "PB14",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB14 with alternate functions SPI2_MISO, TIM1_CH2N, USART3_RTS and TIM15_CH1."
      },
      {
        "number": "28",
        "name": "PB15",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB15 with alternate functions SPI2_MOSI, TIM1_CH3N, TIM15_CH1N and remap TIM15_CH2."
      },
      {
        "number": "29",
        "name": "PA8",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PA8 with alternate functions USART1_CK, MCO and TIM1_CH1."
      },
      {
        "number": "30",
        "name": "PA9",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PA9 with alternate functions USART1_TX, TIM1_CH2 and TIM15_BKIN (remap)."
      },
      {
        "number": "31",
        "name": "PA10",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PA10 with alternate functions USART1_RX, TIM1_CH3 and TIM17_BKIN (remap)."
      },
      {
        "number": "32",
        "name": "PA11",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PA11 with alternate functions USART1_CTS and TIM1_CH4."
      },
      {
        "number": "33",
        "name": "PA12",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PA12 with alternate functions USART1_RTS and TIM1_ETR."
      },
      {
        "number": "34",
        "name": "PA13",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PA13, default function JTMS-SWDIO (serial wire debug data input/output)."
      },
      {
        "number": "35",
        "name": "VSS_2",
        "type": "power_in",
        "description": "Ground pin for the digital supply domain."
      },
      {
        "number": "36",
        "name": "VDD_2",
        "type": "power_in",
        "description": "Digital supply pin; application supply and I/Os are specified from 2.0 V to 3.6 V."
      },
      {
        "number": "37",
        "name": "PA14",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PA14, default function JTCK/SWCLK (serial wire debug clock)."
      },
      {
        "number": "38",
        "name": "PA15",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PA15, default function JTDI, with remap alternate functions TIM2_CH1_ETR and SPI1_NSS."
      },
      {
        "number": "39",
        "name": "PB3",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB3, default function JTDO, with alternate functions TRACESWO, TIM2_CH2 and SPI1_SCK (remap)."
      },
      {
        "number": "40",
        "name": "PB4",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB4, default function NJTRST, with alternate functions TIM3_CH1 and SPI1_MISO (remap)."
      },
      {
        "number": "41",
        "name": "PB5",
        "type": "bidirectional",
        "description": "GPIO PB5 (not 5 V tolerant) with alternate functions I2C1_SMBA, TIM16_BKIN, and remap TIM3_CH2 and SPI1_MOSI."
      },
      {
        "number": "42",
        "name": "PB6",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB6 with alternate functions I2C1_SCL, TIM4_CH1, TIM16_CH1N and USART1_TX (remap)."
      },
      {
        "number": "43",
        "name": "PB7",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB7 with alternate functions I2C1_SDA, TIM4_CH2, TIM17_CH1N and USART1_RX (remap)."
      },
      {
        "number": "44",
        "name": "BOOT0",
        "type": "input",
        "description": "Boot-mode selection input BOOT0."
      },
      {
        "number": "45",
        "name": "PB8",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB8 with alternate functions TIM4_CH3, TIM16_CH1, CEC and I2C1_SCL."
      },
      {
        "number": "46",
        "name": "PB9",
        "type": "bidirectional",
        "description": "5 V tolerant GPIO PB9 with alternate functions TIM4_CH4, TIM17_CH1 and I2C1_SDA."
      },
      {
        "number": "47",
        "name": "VSS_3",
        "type": "power_in",
        "description": "Ground pin for the digital supply domain."
      },
      {
        "number": "48",
        "name": "VDD_3",
        "type": "power_in",
        "description": "Digital supply pin; application supply and I/Os are specified from 2.0 V to 3.6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout for the LQFP48 (7x7 mm) package was taken from the LQFP48 column of Table 4 (pin definitions); Pin types use KiCad classes: supply pins (VBAT, VDD, VDDA, VSS, VSSA) are power_in; I/O pins are bid; Descriptions are abbreviated to the default and remappable alternate functions printed in Table 4; t"
        ],
        "pages_sent": 46,
        "cost_usd": 0.3699,
        "at": "2026-11-13T15:37:15"
      },
      "datasheet": {
        "url": "https://www.st.com/content/ccc/resource/technical/document/datasheet/dd/87/fd/2a/fb/3f/48/5c/CD00251732.pdf/files/CD00251732.pdf/jcr:content/translations/en.CD00251732.pdf",
        "pages": 96,
        "sha256": "360e3be010cabad4",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm32f100cbt7btr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stm32f100cbt7btr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "507059b9fb94e9d21158adcc59078178d3756b3612a97c9442314f9d48021eb3",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "LQFP48",
      "source_page": 86,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          8.8,
          9.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "stm32f100cbt7btr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}