main
History Download
Ray Initial commit: component/stm32f091rct6 9d93f70

STM32F091RCT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

STM32F091RCT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply pin (1.65-3.6 V) that powers the RTC, external 32.768 kHz oscillator and backup registers when VDD is not present.
2 PC13 bidirectional Standard 3.3 V I/O (TC) supplied through the RTC power switch, limited to 3 mA sink (max 2 MHz/30 pF in output mode); usable as GPIO or as WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT alternate functions.
3 PC14-OSC32_IN (PC14) bidirectional Standard 3.3 V I/O (TC) supplied through the RTC power switch, usable as GPIO or as the 32.768 kHz LSE crystal oscillator input (OSC32_IN).
4 PC15-OSC32_OUT (PC15) bidirectional Standard 3.3 V I/O (TC) supplied through the RTC power switch, usable as GPIO or as the 32.768 kHz LSE crystal oscillator output (OSC32_OUT).
5 PF0-OSC_IN (PF0) bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) usable as GPIO with CRS_SYNC or I2C1_SDA alternate function, or as the 4-32 MHz HSE crystal oscillator input (OSC_IN).
6 PF1-OSC_OUT (PF1) bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) usable as GPIO with I2C1_SCL alternate function, or as the 4-32 MHz HSE crystal oscillator output (OSC_OUT).
7 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor; active-low device reset input and internal reset output.
8 PC0 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with EVENTOUT, USART6_TX or USART7_TX alternate functions and ADC_IN10 additional analog input.
9 PC1 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with EVENTOUT, USART6_RX or USART7_RX alternate functions and ADC_IN11 additional analog input.
10 PC2 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with SPI2_MISO/I2S2_MCK, EVENTOUT or USART8_TX alternate functions and ADC_IN12 additional analog input.
11 PC3 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with SPI2_MOSI/I2S2_SD, EVENTOUT or USART8_RX alternate functions and ADC_IN13 additional analog input.
12 VSSA power_in Analog ground supply pin for the ADC, DAC, comparators and clock circuits.
13 VDDA power_in Analog supply pin, from VDD to 3.6 V (2.4-3.6 V minimum when the ADC or DAC is used) for ADC, DAC, comparators, RCs and PLL.
14 PA0 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1 or USART4_TX alternate functions; additional functions COMP1_OUT, RTC_TAMP2, WKUP1, ADC_IN0 and COMP1_INM6.
15 PA1 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX or EVENTOUT alternate functions; additional functions ADC_IN1 and COMP1_INP.
16 PA2 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with USART2_TX, TIM2_CH3, TIM15_CH1 or TSC_G1_IO3 alternate functions; additional functions COMP2_OUT, ADC_IN2, WKUP4 and COMP2_INM6.
17 PA3 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with USART2_RX, TIM2_CH4, TIM15_CH2 or TSC_G1_IO4 alternate functions; additional functions ADC_IN3 and COMP2_INP.
18 VSS power_in Digital ground supply pin.
19 VDD power_in Digital power supply pin, 2.0 V to 3.6 V, for I/Os and the internal regulator.
20 PA4 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_NSS/I2S1_WS, TSC_G2_IO1, TIM14_CH1, USART2_CK or USART6_TX alternate functions; additional functions COMP1_INM4, COMP2_INM4, ADC_IN4 and DAC_OUT1.
21 PA5 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2 or USART6_RX alternate functions; additional functions COMP1_INM5, COMP2_INM5, ADC_IN5 and DAC_OUT2.
22 PA6 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TSC_G2_IO3, TIM16_CH1, COMP1_OUT, EVENTOUT or USART3_CTS alternate functions; additional function ADC_IN6.
23 PA7 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4 or EVENTOUT alternate functions; additional function ADC_IN7.
24 PC4 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with EVENTOUT or USART3_TX alternate functions and ADC_IN14 additional analog input.
25 PC5 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with TSC_G3_IO1 or USART3_RX alternate functions; additional functions ADC_IN15 and WKUP5.
26 PB0 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT or USART3_CK alternate functions and ADC_IN8 additional analog input.
27 PB1 bidirectional 3.3 V-tolerant ADC-connected I/O (TTa) with TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N or TSC_G3_IO3 alternate functions and ADC_IN9 additional analog input.
28 PB2 bidirectional 5 V-tolerant I/O (FT) with TSC_G3_IO4 alternate function.
29 PB10 bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC or TIM2_CH3 alternate functions.
30 PB11 bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1 or I2C2_SDA alternate functions.
31 VSS power_in Digital ground supply pin.
32 VDD power_in Digital power supply pin, 2.0 V to 3.6 V.
33 PB12 bidirectional 5 V-tolerant I/O (FT) with TIM1_BKIN, TIM15_BKIN, SPI2_NSS/I2S2_WS, USART3_CK, TSC_G6_IO2 or EVENTOUT alternate functions.
34 PB13 bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N or TSC_G6_IO3 alternate functions.
35 PB14 bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_MISO/I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1 or TSC_G6_IO4 alternate functions.
36 PB15 bidirectional 5 V-tolerant I/O (FT) with SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N or TIM15_CH2 alternate functions; additional functions WKUP7 and RTC_REFIN.
37 PC6 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH1 or USART7_TX alternate functions.
38 PC7 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH2 or USART7_RX alternate functions.
39 PC8 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH3 or USART8_TX alternate functions.
40 PC9 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH4 or USART8_RX alternate functions.
41 PA8 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART1_CK, TIM1_CH1, EVENTOUT, MCO or CRS_SYNC alternate functions.
42 PA9 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART1_TX, TIM1_CH2, TIM15_BKIN, MCO, TSC_G4_IO1 or I2C1_SCL alternate functions; also usable for USART bootloader reprogramming.
43 PA10 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2 or I2C1_SDA alternate functions.
44 PA11 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with CAN_RX, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT or I2C2_SCL alternate functions.
45 PA12 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with CAN_TX, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT or I2C2_SDA alternate functions.
46 PA13 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with IR_OUT or SWDIO alternate function; after reset configured as SWDIO with the internal pull-up activated.
47 VSS power_in Digital ground supply pin.
48 VDDIO2 power_in Independent digital power supply pin, 1.65 V to 3.6 V, for the VDDIO2-marked I/Os; must not be supplied unless VDD is present.
49 PA14 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART2_TX or SWCLK alternate function; after reset configured as SWCLK with the internal pull-down activated.
50 PA15 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with SPI1_NSS/I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR or EVENTOUT alternate functions.
51 PC10 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_TX or USART4_TX alternate functions.
52 PC11 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_RX or USART4_RX alternate functions.
53 PC12 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_CK, USART4_CK or USART5_TX alternate functions.
54 PD2 bidirectional 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_RTS, TIM3_ETR or USART5_RX alternate functions.
55 PB3 bidirectional 5 V-tolerant I/O (FT) with SPI1_SCK/I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT or USART5_TX alternate functions.
56 PB4 bidirectional 5 V-tolerant I/O (FT) with SPI1_MISO/I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT or USART5_RX alternate functions.
57 PB5 bidirectional 5 V-tolerant I/O (FT) with SPI1_MOSI/I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2 or USART5_CK_RTS alternate functions; additional function WKUP6.
58 PB6 bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with I2C1_SCL, USART1_TX, TIM16_CH1N or TSC_G5_IO3 alternate functions; also usable for I2C bootloader reprogramming.
59 PB7 bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N or TSC_G5_IO4 alternate functions; also usable for I2C bootloader reprogramming.
60 PF11-BOOT0 bidirectional 5 V-tolerant I/O (FT) that also serves as the BOOT0 boot memory selection pin sampled at reset.
61 PB8 bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC or CAN_RX alternate functions.
62 PB9 bidirectional 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_NSS/I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT or CAN_TX alternate functions.
63 VSS power_in Digital ground supply pin.
64 VDD power_in Digital power supply pin, 2.0 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: STM32F091RCT6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32f091rct6-etched.step / stm32f091rct6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f091rct6.step / stm32f091rct6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (128 pp, sha256 f96a82f50344c619, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF