← Commit history

Initial commit: component/stm32f091rct6

Ray ·9d93f70c77 ·
2 files changed +579
README.mdadded+100
@@ -0,0 +1,100 @@+# STM32F091RCT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32F091RCT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup power supply pin (1.65-3.6 V) that powers the RTC, external 32.768 kHz oscillator and backup registers when VDD is not present. |+| 2 | PC13 | bidirectional | Standard 3.3 V I/O (TC) supplied through the RTC power switch, limited to 3 mA sink (max 2 MHz/30 pF in output mode); usable as GPIO or as WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT alternate functions. |+| 3 | PC14-OSC32_IN (PC14) | bidirectional | Standard 3.3 V I/O (TC) supplied through the RTC power switch, usable as GPIO or as the 32.768 kHz LSE crystal oscillator input (OSC32_IN). |+| 4 | PC15-OSC32_OUT (PC15) | bidirectional | Standard 3.3 V I/O (TC) supplied through the RTC power switch, usable as GPIO or as the 32.768 kHz LSE crystal oscillator output (OSC32_OUT). |+| 5 | PF0-OSC_IN (PF0) | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) usable as GPIO with CRS_SYNC or I2C1_SDA alternate function, or as the 4-32 MHz HSE crystal oscillator input (OSC_IN). |+| 6 | PF1-OSC_OUT (PF1) | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) usable as GPIO with I2C1_SCL alternate function, or as the 4-32 MHz HSE crystal oscillator output (OSC_OUT). |+| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor; active-low device reset input and internal reset output. |+| 8 | PC0 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with EVENTOUT, USART6_TX or USART7_TX alternate functions and ADC_IN10 additional analog input. |+| 9 | PC1 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with EVENTOUT, USART6_RX or USART7_RX alternate functions and ADC_IN11 additional analog input. |+| 10 | PC2 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with SPI2_MISO/I2S2_MCK, EVENTOUT or USART8_TX alternate functions and ADC_IN12 additional analog input. |+| 11 | PC3 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with SPI2_MOSI/I2S2_SD, EVENTOUT or USART8_RX alternate functions and ADC_IN13 additional analog input. |+| 12 | VSSA | power_in | Analog ground supply pin for the ADC, DAC, comparators and clock circuits. |+| 13 | VDDA | power_in | Analog supply pin, from VDD to 3.6 V (2.4-3.6 V minimum when the ADC or DAC is used) for ADC, DAC, comparators, RCs and PLL. |+| 14 | PA0 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1 or USART4_TX alternate functions; additional functions COMP1_OUT, RTC_TAMP2, WKUP1, ADC_IN0 and COMP1_INM6. |+| 15 | PA1 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX or EVENTOUT alternate functions; additional functions ADC_IN1 and COMP1_INP. |+| 16 | PA2 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with USART2_TX, TIM2_CH3, TIM15_CH1 or TSC_G1_IO3 alternate functions; additional functions COMP2_OUT, ADC_IN2, WKUP4 and COMP2_INM6. |+| 17 | PA3 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with USART2_RX, TIM2_CH4, TIM15_CH2 or TSC_G1_IO4 alternate functions; additional functions ADC_IN3 and COMP2_INP. |+| 18 | VSS | power_in | Digital ground supply pin. |+| 19 | VDD | power_in | Digital power supply pin, 2.0 V to 3.6 V, for I/Os and the internal regulator. |+| 20 | PA4 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_NSS/I2S1_WS, TSC_G2_IO1, TIM14_CH1, USART2_CK or USART6_TX alternate functions; additional functions COMP1_INM4, COMP2_INM4, ADC_IN4 and DAC_OUT1. |+| 21 | PA5 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2 or USART6_RX alternate functions; additional functions COMP1_INM5, COMP2_INM5, ADC_IN5 and DAC_OUT2. |+| 22 | PA6 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TSC_G2_IO3, TIM16_CH1, COMP1_OUT, EVENTOUT or USART3_CTS alternate functions; additional function ADC_IN6. |+| 23 | PA7 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4 or EVENTOUT alternate functions; additional function ADC_IN7. |+| 24 | PC4 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with EVENTOUT or USART3_TX alternate functions and ADC_IN14 additional analog input. |+| 25 | PC5 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with TSC_G3_IO1 or USART3_RX alternate functions; additional functions ADC_IN15 and WKUP5. |+| 26 | PB0 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT or USART3_CK alternate functions and ADC_IN8 additional analog input. |+| 27 | PB1 | bidirectional | 3.3 V-tolerant ADC-connected I/O (TTa) with TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N or TSC_G3_IO3 alternate functions and ADC_IN9 additional analog input. |+| 28 | PB2 | bidirectional | 5 V-tolerant I/O (FT) with TSC_G3_IO4 alternate function. |+| 29 | PB10 | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC or TIM2_CH3 alternate functions. |+| 30 | PB11 | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1 or I2C2_SDA alternate functions. |+| 31 | VSS | power_in | Digital ground supply pin. |+| 32 | VDD | power_in | Digital power supply pin, 2.0 V to 3.6 V. |+| 33 | PB12 | bidirectional | 5 V-tolerant I/O (FT) with TIM1_BKIN, TIM15_BKIN, SPI2_NSS/I2S2_WS, USART3_CK, TSC_G6_IO2 or EVENTOUT alternate functions. |+| 34 | PB13 | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N or TSC_G6_IO3 alternate functions. |+| 35 | PB14 | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_MISO/I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1 or TSC_G6_IO4 alternate functions. |+| 36 | PB15 | bidirectional | 5 V-tolerant I/O (FT) with SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N or TIM15_CH2 alternate functions; additional functions WKUP7 and RTC_REFIN. |+| 37 | PC6 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH1 or USART7_TX alternate functions. |+| 38 | PC7 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH2 or USART7_RX alternate functions. |+| 39 | PC8 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH3 or USART8_TX alternate functions. |+| 40 | PC9 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH4 or USART8_RX alternate functions. |+| 41 | PA8 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART1_CK, TIM1_CH1, EVENTOUT, MCO or CRS_SYNC alternate functions. |+| 42 | PA9 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART1_TX, TIM1_CH2, TIM15_BKIN, MCO, TSC_G4_IO1 or I2C1_SCL alternate functions; also usable for USART bootloader reprogramming. |+| 43 | PA10 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2 or I2C1_SDA alternate functions. |+| 44 | PA11 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with CAN_RX, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT or I2C2_SCL alternate functions. |+| 45 | PA12 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with CAN_TX, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT or I2C2_SDA alternate functions. |+| 46 | PA13 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with IR_OUT or SWDIO alternate function; after reset configured as SWDIO with the internal pull-up activated. |+| 47 | VSS | power_in | Digital ground supply pin. |+| 48 | VDDIO2 | power_in | Independent digital power supply pin, 1.65 V to 3.6 V, for the VDDIO2-marked I/Os; must not be supplied unless VDD is present. |+| 49 | PA14 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART2_TX or SWCLK alternate function; after reset configured as SWCLK with the internal pull-down activated. |+| 50 | PA15 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with SPI1_NSS/I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR or EVENTOUT alternate functions. |+| 51 | PC10 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_TX or USART4_TX alternate functions. |+| 52 | PC11 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_RX or USART4_RX alternate functions. |+| 53 | PC12 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_CK, USART4_CK or USART5_TX alternate functions. |+| 54 | PD2 | bidirectional | 5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_RTS, TIM3_ETR or USART5_RX alternate functions. |+| 55 | PB3 | bidirectional | 5 V-tolerant I/O (FT) with SPI1_SCK/I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT or USART5_TX alternate functions. |+| 56 | PB4 | bidirectional | 5 V-tolerant I/O (FT) with SPI1_MISO/I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT or USART5_RX alternate functions. |+| 57 | PB5 | bidirectional | 5 V-tolerant I/O (FT) with SPI1_MOSI/I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2 or USART5_CK_RTS alternate functions; additional function WKUP6. |+| 58 | PB6 | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with I2C1_SCL, USART1_TX, TIM16_CH1N or TSC_G5_IO3 alternate functions; also usable for I2C bootloader reprogramming. |+| 59 | PB7 | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N or TSC_G5_IO4 alternate functions; also usable for I2C bootloader reprogramming. |+| 60 | PF11-BOOT0 | bidirectional | 5 V-tolerant I/O (FT) that also serves as the BOOT0 boot memory selection pin sampled at reset. |+| 61 | PB8 | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC or CAN_RX alternate functions. |+| 62 | PB9 | bidirectional | 5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_NSS/I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT or CAN_TX alternate functions. |+| 63 | VSS | power_in | Digital ground supply pin. |+| 64 | VDD | power_in | Digital power supply pin, 2.0 V to 3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32F091RCT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32f091rct6-etched.step` / `stm32f091rct6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f091rct6.step` / `stm32f091rct6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182693017571328) (128 pp, sha256 `f96a82f50344c619`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f091rct6-datasheet.pdf)
page.jsonadded+479
@@ -0,0 +1,479 @@+{+  "slug": "stm32f091rct6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32f091rct6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32f091rct6.kicad_sym",+    "stm32f091rct6.kicad_mod",+    "stm32f091rct6.glb",+    "stm32f091rct6.step",+    "stm32f091rct6.lbr",+    "docs/hero.png",+    "docs/stm32f091rct6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32F091RCT6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182693017571328",+    "parts": {+      "symbol": "stm32f091rct6.kicad_sym",+      "footprint": "stm32f091rct6.kicad_mod",+      "model_3d": "stm32f091rct6-etched.glb",+      "model_3d_plain": "stm32f091rct6.glb",+      "model_3d_step": "stm32f091rct6-etched.step",+      "model_3d_step_plain": "stm32f091rct6.step",+      "lbr": "stm32f091rct6.lbr"+    },+    "distributor_links": {+      "lcsc": "C89056"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup power supply pin (1.65-3.6 V) that powers the RTC, external 32.768 kHz oscillator and backup registers when VDD is not present."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "Standard 3.3 V I/O (TC) supplied through the RTC power switch, limited to 3 mA sink (max 2 MHz/30 pF in output mode); usable as GPIO or as WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT alternate functions."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN (PC14)",+        "type": "bidirectional",+        "description": "Standard 3.3 V I/O (TC) supplied through the RTC power switch, usable as GPIO or as the 32.768 kHz LSE crystal oscillator input (OSC32_IN)."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT (PC15)",+        "type": "bidirectional",+        "description": "Standard 3.3 V I/O (TC) supplied through the RTC power switch, usable as GPIO or as the 32.768 kHz LSE crystal oscillator output (OSC32_OUT)."+      },+      {+        "number": "5",+        "name": "PF0-OSC_IN (PF0)",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) usable as GPIO with CRS_SYNC or I2C1_SDA alternate function, or as the 4-32 MHz HSE crystal oscillator input (OSC_IN)."+      },+      {+        "number": "6",+        "name": "PF1-OSC_OUT (PF1)",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) usable as GPIO with I2C1_SCL alternate function, or as the 4-32 MHz HSE crystal oscillator output (OSC_OUT)."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with embedded weak pull-up resistor; active-low device reset input and internal reset output."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with EVENTOUT, USART6_TX or USART7_TX alternate functions and ADC_IN10 additional analog input."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with EVENTOUT, USART6_RX or USART7_RX alternate functions and ADC_IN11 additional analog input."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with SPI2_MISO/I2S2_MCK, EVENTOUT or USART8_TX alternate functions and ADC_IN12 additional analog input."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with SPI2_MOSI/I2S2_SD, EVENTOUT or USART8_RX alternate functions and ADC_IN13 additional analog input."+      },+      {+        "number": "12",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground supply pin for the ADC, DAC, comparators and clock circuits."+      },+      {+        "number": "13",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply pin, from VDD to 3.6 V (2.4-3.6 V minimum when the ADC or DAC is used) for ADC, DAC, comparators, RCs and PLL."+      },+      {+        "number": "14",+        "name": "PA0",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1 or USART4_TX alternate functions; additional functions COMP1_OUT, RTC_TAMP2, WKUP1, ADC_IN0 and COMP1_INM6."+      },+      {+        "number": "15",+        "name": "PA1",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with USART2_RTS, TIM2_CH2, TIM15_CH1N, TSC_G1_IO2, USART4_RX or EVENTOUT alternate functions; additional functions ADC_IN1 and COMP1_INP."+      },+      {+        "number": "16",+        "name": "PA2",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with USART2_TX, TIM2_CH3, TIM15_CH1 or TSC_G1_IO3 alternate functions; additional functions COMP2_OUT, ADC_IN2, WKUP4 and COMP2_INM6."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with USART2_RX, TIM2_CH4, TIM15_CH2 or TSC_G1_IO4 alternate functions; additional functions ADC_IN3 and COMP2_INP."+      },+      {+        "number": "18",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "19",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 2.0 V to 3.6 V, for I/Os and the internal regulator."+      },+      {+        "number": "20",+        "name": "PA4",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_NSS/I2S1_WS, TSC_G2_IO1, TIM14_CH1, USART2_CK or USART6_TX alternate functions; additional functions COMP1_INM4, COMP2_INM4, ADC_IN4 and DAC_OUT1."+      },+      {+        "number": "21",+        "name": "PA5",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2 or USART6_RX alternate functions; additional functions COMP1_INM5, COMP2_INM5, ADC_IN5 and DAC_OUT2."+      },+      {+        "number": "22",+        "name": "PA6",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TSC_G2_IO3, TIM16_CH1, COMP1_OUT, EVENTOUT or USART3_CTS alternate functions; additional function ADC_IN6."+      },+      {+        "number": "23",+        "name": "PA7",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, COMP2_OUT, TSC_G2_IO4 or EVENTOUT alternate functions; additional function ADC_IN7."+      },+      {+        "number": "24",+        "name": "PC4",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with EVENTOUT or USART3_TX alternate functions and ADC_IN14 additional analog input."+      },+      {+        "number": "25",+        "name": "PC5",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with TSC_G3_IO1 or USART3_RX alternate functions; additional functions ADC_IN15 and WKUP5."+      },+      {+        "number": "26",+        "name": "PB0",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT or USART3_CK alternate functions and ADC_IN8 additional analog input."+      },+      {+        "number": "27",+        "name": "PB1",+        "type": "bidirectional",+        "description": "3.3 V-tolerant ADC-connected I/O (TTa) with TIM3_CH4, USART3_RTS, TIM14_CH1, TIM1_CH3N or TSC_G3_IO3 alternate functions and ADC_IN9 additional analog input."+      },+      {+        "number": "28",+        "name": "PB2",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT) with TSC_G3_IO4 alternate function."+      },+      {+        "number": "29",+        "name": "PB10",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_TX, CEC, TSC_SYNC or TIM2_CH3 alternate functions."+      },+      {+        "number": "30",+        "name": "PB11",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) with USART3_RX, TIM2_CH4, EVENTOUT, TSC_G6_IO1 or I2C2_SDA alternate functions."+      },+      {+        "number": "31",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 2.0 V to 3.6 V."+      },+      {+        "number": "33",+        "name": "PB12",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT) with TIM1_BKIN, TIM15_BKIN, SPI2_NSS/I2S2_WS, USART3_CK, TSC_G6_IO2 or EVENTOUT alternate functions."+      },+      {+        "number": "34",+        "name": "PB13",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_SCK/I2S2_CK, I2C2_SCL, USART3_CTS, TIM1_CH1N or TSC_G6_IO3 alternate functions."+      },+      {+        "number": "35",+        "name": "PB14",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_MISO/I2S2_MCK, I2C2_SDA, USART3_RTS, TIM1_CH2N, TIM15_CH1 or TSC_G6_IO4 alternate functions."+      },+      {+        "number": "36",+        "name": "PB15",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT) with SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N or TIM15_CH2 alternate functions; additional functions WKUP7 and RTC_REFIN."+      },+      {+        "number": "37",+        "name": "PC6",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH1 or USART7_TX alternate functions."+      },+      {+        "number": "38",+        "name": "PC7",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH2 or USART7_RX alternate functions."+      },+      {+        "number": "39",+        "name": "PC8",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH3 or USART8_TX alternate functions."+      },+      {+        "number": "40",+        "name": "PC9",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with TIM3_CH4 or USART8_RX alternate functions."+      },+      {+        "number": "41",+        "name": "PA8",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with USART1_CK, TIM1_CH1, EVENTOUT, MCO or CRS_SYNC alternate functions."+      },+      {+        "number": "42",+        "name": "PA9",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with USART1_TX, TIM1_CH2, TIM15_BKIN, MCO, TSC_G4_IO1 or I2C1_SCL alternate functions; also usable for USART bootloader reprogramming."+      },+      {+        "number": "43",+        "name": "PA10",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2 or I2C1_SDA alternate functions."+      },+      {+        "number": "44",+        "name": "PA11",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with CAN_RX, USART1_CTS, TIM1_CH4, COMP1_OUT, TSC_G4_IO3, EVENTOUT or I2C2_SCL alternate functions."+      },+      {+        "number": "45",+        "name": "PA12",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with CAN_TX, USART1_RTS, TIM1_ETR, COMP2_OUT, TSC_G4_IO4, EVENTOUT or I2C2_SDA alternate functions."+      },+      {+        "number": "46",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with IR_OUT or SWDIO alternate function; after reset configured as SWDIO with the internal pull-up activated."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "48",+        "name": "VDDIO2",+        "type": "power_in",+        "description": "Independent digital power supply pin, 1.65 V to 3.6 V, for the VDDIO2-marked I/Os; must not be supplied unless VDD is present."+      },+      {+        "number": "49",+        "name": "PA14",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with USART2_TX or SWCLK alternate function; after reset configured as SWCLK with the internal pull-down activated."+      },+      {+        "number": "50",+        "name": "PA15",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with SPI1_NSS/I2S1_WS, USART2_RX, USART4_RTS, TIM2_CH1_ETR or EVENTOUT alternate functions."+      },+      {+        "number": "51",+        "name": "PC10",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_TX or USART4_TX alternate functions."+      },+      {+        "number": "52",+        "name": "PC11",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_RX or USART4_RX alternate functions."+      },+      {+        "number": "53",+        "name": "PC12",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_CK, USART4_CK or USART5_TX alternate functions."+      },+      {+        "number": "54",+        "name": "PD2",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT), supplied from VDDIO2, with USART3_RTS, TIM3_ETR or USART5_RX alternate functions."+      },+      {+        "number": "55",+        "name": "PB3",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT) with SPI1_SCK/I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT or USART5_TX alternate functions."+      },+      {+        "number": "56",+        "name": "PB4",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT) with SPI1_MISO/I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT or USART5_RX alternate functions."+      },+      {+        "number": "57",+        "name": "PB5",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT) with SPI1_MOSI/I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2 or USART5_CK_RTS alternate functions; additional function WKUP6."+      },+      {+        "number": "58",+        "name": "PB6",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) with I2C1_SCL, USART1_TX, TIM16_CH1N or TSC_G5_IO3 alternate functions; also usable for I2C bootloader reprogramming."+      },+      {+        "number": "59",+        "name": "PB7",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) with I2C1_SDA, USART1_RX, USART4_CTS, TIM17_CH1N or TSC_G5_IO4 alternate functions; also usable for I2C bootloader reprogramming."+      },+      {+        "number": "60",+        "name": "PF11-BOOT0",+        "type": "bidirectional",+        "description": "5 V-tolerant I/O (FT) that also serves as the BOOT0 boot memory selection pin sampled at reset."+      },+      {+        "number": "61",+        "name": "PB8",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) with I2C1_SCL, CEC, TIM16_CH1, TSC_SYNC or CAN_RX alternate functions."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "5 V-tolerant, Fast Mode Plus capable I/O (FTf) with SPI2_NSS/I2S2_WS, I2C1_SDA, IR_OUT, TIM17_CH1, EVENTOUT or CAN_TX alternate functions."+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Digital ground supply pin."+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply pin, 2.0 V to 3.6 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins 33-40 mapping uncertainty: The datasheet Table 13 shows these GPIO pins (PC10, PC11, PC12, PD0,; Pin ordering irregularity: PA9 appears at pin 41 and PA8 at pin 42 (not in ascending order by GPIO n; Duplicate VSS and VDD pins: VSS appears at pins 27, 47, 63 and VDD at pins 28, 64 for proper power d"+        ],+        "pages_sent": 128,+        "cost_usd": 1.4309,+        "at": "2026-09-24T02:13:09"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182693017571328",+        "pages": 128,+        "sha256": "f96a82f50344c619",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file