3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSTM32F042K6U6TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)
STM32F042K6U6TR from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital power supply, 2.0 to 3.6 V |
| 2 | PF0-OSC_IN | bidirectional | GPIO or external oscillator input for 4-32 MHz crystal with CRS_SYNC and I2C1_SDA alternate functions |
| 3 | PF1-OSC_OUT | bidirectional | GPIO or external oscillator output for crystal with I2C1_SCL alternate function |
| 4 | NRST | input | Device reset input / internal reset output (active low) with embedded weak pull-up resistor |
| 5 | VDDA | power_in | Analog power supply, from VDD to 3.6 V (2.4 V minimum if ADC is used), must be >= VDD |
| 6 | PA0 | bidirectional | TTa I/O with USART2_CTS, TIM2_CH1_ETR, TSC_G1_IO1, RTC_TAMP2, WKUP1, ADC_IN0 alternate functions |
| 7 | PA1 | bidirectional | TTa I/O with USART2_RTS, TIM2_CH2, TSC_G1_IO2, EVENTOUT, ADC_IN1 alternate functions |
| 8 | PA2 | bidirectional | TTa I/O with USART2_TX, TIM2_CH3, TSC_G1_IO3, ADC_IN2, WKUP4 alternate functions |
| 9 | PA3 | bidirectional | TTa I/O with USART2_RX, TIM2_CH4, TSC_G1_IO4, ADC_IN3 alternate functions |
| 10 | PA4 | bidirectional | TTa I/O with SPI1_NSS, I2S1_WS, TIM14_CH1, TSC_G2_IO1, USART2_CK, USB_NOE, ADC_IN4 alternate functions |
| 11 | PA5 | bidirectional | TTa I/O with SPI1_SCK, I2S1_CK, CEC, TIM2_CH1_ETR, TSC_G2_IO2, ADC_IN5 alternate functions |
| 12 | PA6 | bidirectional | TTa I/O with SPI1_MISO, I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1, TSC_G2_IO3, EVENTOUT, ADC_IN6 alternate functions |
| 13 | PA7 | bidirectional | TTa I/O with SPI1_MOSI, I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1, TSC_G2_IO4, EVENTOUT, ADC_IN7 alternate functions |
| 14 | PB0 | bidirectional | TTa I/O with TIM3_CH3, TIM1_CH2N, TSC_G3_IO2, EVENTOUT, ADC_IN8 alternate functions |
| 15 | PB1 | bidirectional | TTa I/O with TIM3_CH4, TIM14_CH1, TIM1_CH3N, TSC_G3_IO3, ADC_IN9 alternate functions |
| 16 | PB2 | bidirectional | FT 5V-tolerant I/O with TSC_G3_IO4 alternate function for capacitive sensing |
| 17 | VDDIO2 | power_in | I/O power supply for high-performance I/Os, 1.65 to 3.6 V, independent from VDD but VDD must be present first |
| 18 | PA8 | bidirectional | FT I/O supplied by VDDIO2 with USART1_CK, TIM1_CH1, EVENTOUT, MCO, CRS_SYNC alternate functions |
| 19 | PA9 | bidirectional | FTf I/O supplied by VDDIO2 with USART1_TX, TIM1_CH2, TSC_G4_IO1, I2C1_SCL alternate functions |
| 20 | PA10 | bidirectional | FTf I/O supplied by VDDIO2 with USART1_RX, TIM1_CH3, TIM17_BKIN, TSC_G4_IO2, I2C1_SDA alternate functions |
| 21 | PA11 | bidirectional | FTf I/O supplied by VDDIO2 with CAN_RX, USART1_CTS, TIM1_CH4, TSC_G4_IO3, EVENTOUT, I2C1_SCL, USB_DM alternate functions; can be remapped to PA9 position using SYSCFG_CFGR1 |
| 22 | PA12 | bidirectional | FTf I/O supplied by VDDIO2 with CAN_TX, USART1_RTS, TIM1_ETR, TSC_G4_IO4, EVENTOUT, I2C1_SDA, USB_DP alternate functions; can be remapped to PA10 position using SYSCFG_CFGR1 |
| 23 | PA13 | bidirectional | FT I/O supplied by VDDIO2 configured as SWDIO at reset with IR_OUT, USB_NOE alternate functions |
| 24 | PA14 | bidirectional | FT I/O supplied by VDDIO2 configured as SWCLK at reset with USART2_TX alternate function |
| 25 | PA15 | bidirectional | FT I/O supplied by VDDIO2 with SPI1_NSS, I2S1_WS, USART2_RX, TIM2_CH1_ETR, EVENTOUT, USB_NOE alternate functions |
| 26 | PB3 | bidirectional | FT I/O with SPI1_SCK, I2S1_CK, TIM2_CH2, TSC_G5_IO1, EVENTOUT alternate functions |
| 27 | PB4 | bidirectional | FT I/O with SPI1_MISO, I2S1_MCK, TIM17_BKIN, TIM3_CH1, TSC_G5_IO2, EVENTOUT alternate functions |
| 28 | PB5 | bidirectional | FT I/O with SPI1_MOSI, I2S1_SD, I2C1_SMBA, TIM16_BKIN, TIM3_CH2, WKUP6 alternate functions |
| 29 | PB6 | bidirectional | FTf I/O with I2C1_SCL, USART1_TX, TIM16_CH1N, TSC_G5_IO3 alternate functions |
| 30 | PB7 | bidirectional | FTf I/O with I2C1_SDA, USART1_RX, TIM17_CH1N, TSC_G5_IO4 alternate functions |
| 31 | PF11 | bidirectional | |
| 32 | PB8 | bidirectional | |
| 33 | VSS | power_in | ST DocID025832 Rev 5 Table 13 STM32F042x pin definitions (p.33): VSS row, UFQFPN32 column '0'; package note 3 (p.93): 'There is an exposed die pad on the underside of the UFQFPN package. It is recommended to connect and solder this back-side pad to PCB ground.' |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage | VDD-VSS | -0.3 | 4 | V | 45 | ||
| External I/O supply voltage | VDDIO2-VSS | -0.3 | 4 | V | 45 | ||
| External analog supply voltage | VDDA-VSS | -0.3 | 4 | V | 45 | ||
| Allowed voltage difference for VDD > VDDA | VDD-VDDA | 0.4 | V | 45 | |||
| External backup supply voltage | VBAT-VSS | -0.3 | 4 | V | 45 | ||
| Input voltage on FT and FTf pins | VIN | -0.3 | V | Max printed as VDDIOx + 4.0; valid only with internal pull-up/pull-down disabled (4 V max otherwise) | 45 | ||
| Input voltage on TTa pins | VIN | -0.3 | 4 | V | 45 | ||
| Input voltage on any other pin | VIN | -0.3 | 4 | V | 45 | ||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 45 | |||
| Variations between all the different ground pins | /VSSx - VSS/ | 50 | mV | 45 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 120 | mA | 46 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | -120 | mA | 46 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 46 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | -100 | mA | 46 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 25 | mA | 46 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | -25 | mA | 46 | |||
| Total output current sunk by sum of all I/Os and control pins | ΣIIO(PIN) | 80 | mA | 46 | |||
| Total output current sourced by sum of all I/Os and control pins | ΣIIO(PIN) | -80 | mA | 46 | |||
| Total output current sourced by sum of all I/Os supplied by VDDIO2 | ΣIIO(PIN) | -40 | mA | 46 | |||
| Injected current on FT and FTf pins | IINJ(PIN) | -5 | 0 | mA | Positive injection not possible on these I/Os | 46 | |
| Injected current on TC and RST pin | IINJ(PIN) | -5 | 5 | mA | 46 | ||
| Injected current on TTa pins | IINJ(PIN) | -5 | 5 | mA | 46 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 46 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 46 | ||
| Maximum junction temperature | TJ | 150 | °C | 46 | |||
| Internal AHB clock frequency | fHCLK | 0 | 48 | MHz | 47 | ||
| Internal APB clock frequency | fPCLK | 0 | 48 | MHz | 47 | ||
| Standard operating voltage | VDD | 2 | 3.6 | V | 47 | ||
| I/O supply voltage | VDDIO2 | 1.65 | 3.6 | V | Must not be supplied if VDD is not present | 47 | |
| Analog operating voltage (ADC not used) | VDDA | 3.6 | V | Must have a potential equal to or higher than VDD (min printed as VDD) | 47 | ||
| Analog operating voltage (ADC used) | VDDA | 2.4 | 3.6 | V | ADC used | 47 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 47 | ||
| I/O input voltage, TC and RST I/O | VIN | -0.3 | V | Max printed as VDDIOx + 0.3 | 47 | ||
| I/O input voltage, TTa I/O | VIN | -0.3 | V | Max printed as VDDA + 0.3 | 47 | ||
| I/O input voltage, FT and FTf I/O | VIN | -0.3 | 5.5 | V | Internal pull-up must be disabled for operation above VDDIOx + 0.3 V | 47 | |
| Power dissipation at TA = 85 °C for suffix 6 | PD | 526 | mW | UFQFPN32 package | 47 | ||
| Ambient temperature, suffix 6 version, maximum power dissipation | TA | -40 | 85 | °C | Suffix 6 | 47 | |
| Ambient temperature, suffix 6 version, low power dissipation | TA | -40 | 105 | °C | Suffix 6; low power dissipation | 47 | |
| Junction temperature range, suffix 6 version | TJ | -40 | 105 | °C | Suffix 6 version | 47 | |
| Power on/power down reset threshold | VPOR/PDR | 1.8 | 1.88 | 1.96 | V | Falling edge | 48 |
| Power on/power down reset threshold | VPOR/PDR | 1.84 | 1.92 | 2 | V | Rising edge | 48 |
| Reset temporization | tRSTTEMPO | 1.5 | 2.5 | 4.5 | ms | 48 | |
| PVD current consumption | IDD(PVD) | 0.15 | 0.26 | µA | 49 | ||
| Internal reference voltage | VREFINT | 1.2 | 1.23 | 1.25 | V | -40 °C < TA < +105 °C | 49 |
| ADC_IN17 buffer startup time | tSTART | 10 | µs | 49 | |||
| ADC sampling time when reading the internal reference voltage | tS_vrefint | 4 | µs | 49 | |||
| Internal reference voltage spread over the temperature range | ΔVREFINT | 10 | mV | VDDA = 3 V | 49 | ||
| Temperature coefficient | TCoeff | -100 | 100 | ppm/°C | 49 | ||
| Weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 72 |
| Input leakage current, TC, FT and FTf I/O, TTa in digital mode | Ilkg | -0.1 | 0.1 | µA | VSS ≤ VIN ≤ VDDIOx | 72 | |
| Input leakage current, FT and FTf I/O | Ilkg | 10 | µA | VDDIOx ≤ VIN ≤ 5 V | 72 | ||
| Weak pull-down equivalent resistor | RPD | 25 | 40 | 55 | kΩ | VIN = -VDDIOx | 73 |
| I/O pin capacitance | CIO | 5 | pF | 73 | |||
| Supply current in Run mode, Flash, HSI48 48 MHz, all peripherals enabled, max at 25 °C | IDD | 20.3 | 23.2 | mA | VDD = 3.6 V; Max @ TA = 25 °C | 50 | |
| Supply current in Run mode, Flash, HSI48 48 MHz, all peripherals enabled, max at 105 °C | IDD | 20.3 | 24.6 | mA | VDD = 3.6 V; Max @ TA = 105 °C | 50 | |
| Supply current in Run mode, Flash, HSI48 48 MHz, all peripherals disabled, max at 25 °C | IDD | 12.7 | 14.4 | mA | VDD = 3.6 V; Max @ TA = 25 °C | 50 | |
| Supply current in Run mode, Flash, HSI48 48 MHz, all peripherals disabled, max at 105 °C | IDD | 12.7 | 14.7 | mA | VDD = 3.6 V; Max @ TA = 105 °C | 50 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32F042K6U6TR - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32f042k6u6tr-etched.step/stm32f042k6u6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f042k6u6tr.step/stm32f042k6u6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (117 pp, sha256
7af7ec8f5a596b23, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).