main
Ray stm32f031f4p6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 4a2367a
{
  "schema_version": 1,
  "type": "component",
  "slug": "stm32f031f4p6",
  "title": "STM32F031F4P6",
  "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), TSSOP-20. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "stm32f031f4p6",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "STM32F031F4P6",
    "manufacturer": "STMicroelectronics",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920064728289280",
    "parts": {
      "symbol": "stm32f031f4p6.kicad_sym",
      "footprint": "stm32f031f4p6.kicad_mod",
      "model_3d": "stm32f031f4p6-etched.glb",
      "model_3d_plain": "stm32f031f4p6.glb",
      "model_3d_step": "stm32f031f4p6-etched.step",
      "model_3d_step_plain": "stm32f031f4p6.step",
      "lbr": "stm32f031f4p6.lbr"
    },
    "distributor_links": {
      "lcsc": "C1340491"
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT0",
        "type": "input",
        "description": "Dedicated boot-selection input (I/O structure type B) used with the boot-selector option bit at startup to choose between booting from user Flash, System memory (bootloader), or embedded SRAM; absolute maximum input voltage range is 0 to 9.0 V."
      },
      {
        "number": "2",
        "name": "PF0",
        "type": "bidirectional",
        "description": "5V-tolerant (FT) general-purpose I/O PF0 (floating input after reset) that can alternatively be configured as OSC_IN, the input of the 4-32 MHz external HSE crystal/resonator or external clock source."
      },
      {
        "number": "3",
        "name": "PF1",
        "type": "bidirectional",
        "description": "5V-tolerant (FT) general-purpose I/O PF1 (floating input after reset) that can alternatively be configured as OSC_OUT, the output of the 4-32 MHz external HSE crystal/resonator oscillator."
      },
      {
        "number": "4",
        "name": "NRST",
        "type": "bidirectional",
        "description": "Bidirectional reset pin (RST structure) with an embedded weak pull-up resistor (typ. 40 kΩ); active-low external reset input and internal power-on/power-down reset output."
      },
      {
        "number": "5",
        "name": "VDDA",
        "type": "power_in",
        "description": "External analog power supply pin for the ADC, reset block, RC oscillators and PLL; must be from VDD up to 3.6 V (minimum 2.4 V when the ADC is used) and must be established before or with VDD."
      },
      {
        "number": "6",
        "name": "PA0",
        "type": "bidirectional",
        "description": "3.3V ADC-tolerant (TTa) I/O PA0 with alternate functions TIM2_CH1_ETR and USART1_CTS, and additional functions ADC_IN0, RTC_TAMP2 and WKUP1 (Standby-mode wakeup pin 1)."
      },
      {
        "number": "7",
        "name": "PA1",
        "type": "bidirectional",
        "description": "TTa I/O PA1 with alternate functions TIM2_CH2, EVENTOUT and USART1_RTS, and additional function ADC_IN1."
      },
      {
        "number": "8",
        "name": "PA2",
        "type": "bidirectional",
        "description": "TTa I/O PA2 with alternate functions USART1_TX and TIM2_CH3, and additional function ADC_IN2."
      },
      {
        "number": "9",
        "name": "PA3",
        "type": "bidirectional",
        "description": "TTa I/O PA3 with alternate functions USART1_RX and TIM2_CH4, and additional function ADC_IN3."
      },
      {
        "number": "10",
        "name": "PA4",
        "type": "bidirectional",
        "description": "TTa I/O PA4 with alternate functions SPI1_NSS/I2S1_WS, USART1_CK and TIM14_CH1, and additional function ADC_IN4."
      },
      {
        "number": "11",
        "name": "PA5",
        "type": "bidirectional",
        "description": "TTa I/O PA5 with alternate functions SPI1_SCK/I2S1_CK and TIM2_CH1_ETR, and additional function ADC_IN5."
      },
      {
        "number": "12",
        "name": "PA6",
        "type": "bidirectional",
        "description": "TTa I/O PA6 with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, TIM16_CH1 and EVENTOUT, and additional function ADC_IN6."
      },
      {
        "number": "13",
        "name": "PA7",
        "type": "bidirectional",
        "description": "TTa I/O PA7 with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM14_CH1, TIM1_CH1N, TIM17_CH1 and EVENTOUT, and additional function ADC_IN7."
      },
      {
        "number": "14",
        "name": "PB1",
        "type": "bidirectional",
        "description": "TTa I/O PB1 with alternate functions TIM3_CH4, TIM14_CH1 and TIM1_CH3N, and additional function ADC_IN9."
      },
      {
        "number": "15",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin; the TSSOP20 package has no separate VSSA pin, so per datasheet note (3) the VSSA pad of the die is internally connected to this VSS pin."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital power supply pin, 2.0 V to 3.6 V, for the I/O ring (VDDIO1) and the internal voltage regulator."
      },
      {
        "number": "17",
        "name": "PA9",
        "type": "bidirectional",
        "description": "5V-tolerant, Fast-mode-Plus-capable (FTf) I/O PA9 with alternate functions USART1_TX, TIM1_CH2 and I2C1_SCL (I2C1 supports Fast Mode Plus up to 1 Mbit/s with 20 mA sink on this pin)."
      },
      {
        "number": "18",
        "name": "PA10",
        "type": "bidirectional",
        "description": "FTf I/O PA10 with alternate functions USART1_RX, TIM1_CH3, TIM17_BKIN and I2C1_SDA (I2C1 supports Fast Mode Plus up to 1 Mbit/s with 20 mA sink on this pin)."
      },
      {
        "number": "19",
        "name": "PA13",
        "type": "bidirectional",
        "description": "5V-tolerant (FT) I/O PA13 with alternate functions IR_OUT and SWDIO; per note (5), after reset this pin defaults to the SWDIO alternate function with its internal pull-up resistor activated."
      },
      {
        "number": "20",
        "name": "PA14",
        "type": "bidirectional",
        "description": "FT I/O PA14 with alternate functions USART1_TX and SWCLK; per note (5), after reset this pin defaults to the SWCLK alternate function with its internal pull-down resistor activated."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "4/20 pins cited to the wrong page (name found elsewhere): ['17:PA9@p26', '18:PA10@p26', '19:PA13@p26', '20:PA14@p26']"
        ],
        "pages_sent": 106,
        "cost_usd": 1.0439,
        "at": "2026-09-24T07:29:53"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920064728289280",
        "pages": 106,
        "sha256": "36b17e3dce795273",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm32f031f4p6.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stm32f031f4p6-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7066713c398bb15da173e99ab3ffe4bbac3f69981e04f7230fd661aca7591957",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "STMicroelectronics",
      "Package": "TSSOP-20",
      "Category": "Embedded Processors & Controllers",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "stm32f031f4p6"
  ],
  "discovery_pitch": "STM32F031F4P6 (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm32f031f4p6.kicad_sym",
    "stm32f031f4p6.kicad_mod",
    "stm32f031f4p6.glb",
    "stm32f031f4p6.step",
    "stm32f031f4p6.lbr",
    "docs/hero.png",
    "docs/stm32f031f4p6-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  }
}