main
Ray Publish 0.1.1 b4d8af6
{
  "schema_version": 1,
  "type": "component",
  "slug": "stc8g1k17a-36i-sop8",
  "title": "STC8G1K17A-36I-SOP8",
  "brief": "STC Micro Microcontroller Units (MCUs/MPUs/SOCs), HSOP-8(3.9x4.9). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "stc8g1k17a-36i-sop8",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "STC8G1K17A-36I-SOP8",
    "manufacturer": "STC Micro",
    "package": "HSOP-8(3.9x4.9)",
    "pin_count": 9,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/5b76295ab6e43792073a51d0ce1481a3.pdf",
    "parts": {
      "symbol": "stc8g1k17a-36i-sop8.kicad_sym",
      "footprint": "stc8g1k17a-36i-sop8.kicad_mod",
      "model_3d": "stc8g1k17a-36i-sop8-hero.glb",
      "model_3d_plain": "stc8g1k17a-36i-sop8.glb",
      "model_3d_step": "stc8g1k17a-36i-sop8-etched.step",
      "model_3d_step_plain": "stc8g1k17a-36i-sop8.step",
      "lbr": "stc8g1k17a-36i-sop8.lbr"
    },
    "distributor_links": {
      "lcsc": "C917328"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T01:25:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "P5.4",
        "type": "bidirectional",
        "description": "Standard I/O port P5.4 that can also be configured as the active-low reset input NRST, and whose internal 4K pull-up stays on when used as reset; as a plain I/O it stays high for about 6.5 ms after power-up, so external circuits must allow for that."
      },
      {
        "number": "2",
        "name": "Vcc",
        "type": "power_in",
        "description": "Power supply pin (AVcc is the ADC supply on the same pin); the datasheet gives an operating voltage of 1.9V to 5.5V."
      },
      {
        "number": "3",
        "name": "P5.5",
        "type": "bidirectional",
        "description": "Standard I/O port P5.5 that also carries alternate functions INT3, T1, T0CLKO, TxD_3, SS, SDA_2, ADC5, ECI, ECI_2 and CCP2_3."
      },
      {
        "number": "4",
        "name": "Gnd/AGnd",
        "type": "power_in",
        "description": "Ground pin (AGnd is the ADC ground on the same pin)."
      },
      {
        "number": "5",
        "name": "P3.0",
        "type": "bidirectional",
        "description": "Standard I/O port P3.0 that also carries RxD (UART1 receive), INT4 external interrupt 4 and ADC0 analog input channel 0; it is weak-pull-up/quasi-bidirectional after power-up and is used for USB ISP download detection."
      },
      {
        "number": "6",
        "name": "P3.1",
        "type": "bidirectional",
        "description": "Standard I/O port P3.1 that also carries TxD (UART1 transmit), ADC1 analog input channel 1, ECI_3 and CCP0_2; it is weak-pull-up/quasi-bidirectional after power-up and is used for USB ISP download detection."
      },
      {
        "number": "7",
        "name": "P3.2",
        "type": "bidirectional",
        "description": "Standard I/O port P3.2 that also carries INT0 external interrupt 0, SCLK (SPI clock), SCL (I2C clock), RxD_2, ADC2 analog input channel 2, CCP0 and CCP0_3."
      },
      {
        "number": "8",
        "name": "P3.3",
        "type": "bidirectional",
        "description": "Standard I/O port P3.3 that also carries INT1 external interrupt 1, MISO (SPI master-in slave-out), SDA (I2C data), TxD_2, ADC3 analog input channel 3, CCP1, CCP1_2 and CCP1_3."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package mismatch: the hint says HSOP-8(3.9x4.9) but the datasheet only lists SOP8 (and DFN8 3x3mm, D; Family caveat: the STC8G1K17A appears in the STC8G1K08A-36I-SOP8/DFN8/DIP8 family table (page 48), a; Pin types: the datasheet labels all of P5.4, P5.5, P3.0-P3.3 as 'I/O 标准 I/O 口' with no electrical ty",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 127,
        "cost_usd": 1.0225,
        "at": "2026-11-05T01:25:19"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/5b76295ab6e43792073a51d0ce1481a3.pdf",
        "pages": 1240,
        "sha256": "7d5e82c9f651aa92",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stc8g1k17a-36i-sop8.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stc8g1k17a-36i-sop8-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d48ddfd3030f56214d2759c06ad64ceb30d13072243f4c47cc3d2f763261ce1c",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SOP8",
      "source_page": 210,
      "D": {
        "nom_mm": 4.9,
        "range_mm": [
          4.8,
          5
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.8,
          4
        ]
      },
      "E": {
        "nom_mm": 6,
        "range_mm": [
          5.8,
          6.2
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          1.35,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "stc8g1k17a-36i-sop8.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "STC Micro",
      "Package": "HSOP-8(3.9x4.9)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "9"
    },
    "appearance": {
      "housing": {
        "quote": "Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following",
        "page": 548,
        "doc": "ds.pdf",
        "material": "PC"
      },
      "version": 1,
      "datasheet_sha256": "7d5e82c9f651aa928f3835549a3fc2736c30431283b01b9ccbf1179766cb8fee"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "7d5e82c9f651aa928f3835549a3fc2736c30431283b01b9ccbf1179766cb8fee",
      "rows": [
        {
          "name": "工作电压",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": 1.9,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 1052,
          "source": "datasheet"
        },
        {
          "name": "VDD 对地电压",
          "symbol": "VDD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 1052,
          "source": "datasheet"
        },
        {
          "name": "I/O 口对地电压",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "printed max is VDD+0.3 V (formula, not a number)",
          "source_page": 1052,
          "source": "datasheet"
        },
        {
          "name": "存储温度",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "℃",
          "min": -55,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 1052,
          "source": "datasheet"
        },
        {
          "name": "工作温度",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "℃",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 1052,
          "source": "datasheet"
        },
        {
          "name": "热阻",
          "symbol": "",
          "kind": "thermal",
          "unit": "℃/W",
          "min": null,
          "typ": 165,
          "max": null,
          "conditions": "",
          "source_page": 1052,
          "source": "datasheet"
        },
        {
          "name": "VIL1 输入低电平",
          "symbol": "VIL1",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.99,
          "conditions": "VSS=0V, VDD=3.3V, 25℃; 打开施密特触发",
          "source_page": 1053,
          "source": "datasheet"
        },
        {
          "name": "VIL1 输入低电平",
          "symbol": "VIL1",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 1.07,
          "conditions": "VSS=0V, VDD=3.3V, 25℃; 关闭施密特触发",
          "source_page": 1053,
          "source": "datasheet"
        },
        {
          "name": "VIH1 输入高电平(普通 I/O)",
          "symbol": "VIH1",
          "kind": "electrical",
          "unit": "V",
          "min": 1.18,
          "typ": null,
          "max": null,
          "conditions": "VSS=0V, VDD=3.3V, 25℃; 打开施密特触发",
          "source_page": 1053,
          "source": "datasheet"
        },
        {
          "name": "VIH1 输入高电平(普通 I/O)",
          "symbol": "VIH1",
          "kind": "electrical",
          "unit": "V",
          "min": 1.09,
          "typ": null,
          "max": null,
          "conditions": "VSS=0V, VDD=3.3V, 25℃; 关闭施密特触发",
          "source_page": 1053,
          "source": "datasheet"
        },
        {
          "name": "逻辑 0 输入电流",
          "symbol": "IIL",
          "kind": "electrical",
          "unit": "uA",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "VSS=0V, VDD=3.3V, 25℃; 端口电压 0V",
          "source_page": 1053,
          "source": "datasheet"
        },
        {
          "name": "逻辑 1 到 0 的转移电流",
          "symbol": "ITL",
          "kind": "electrical",
          "unit": "uA",
          "min": 100,
          "typ": 270,
          "max": 600,
          "conditions": "VSS=0V, VDD=3.3V, 25℃; 端口电压 2.0V",
          "source_page": 1053,
          "source": "datasheet"
        },
        {
          "name": "I/O 口上拉电阻",
          "symbol": "RPU",
          "kind": "electrical",
          "unit": "KΩ",
          "min": 5.8,
          "typ": 5.9,
          "max": 6,
          "conditions": "VSS=0V, VDD=3.3V, 25℃",
          "source_page": 1053,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "stc8g1k17a-36i-sop8"
  ],
  "discovery_pitch": "STC8G1K17A-36I-SOP8 (STC Micro) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stc8g1k17a-36i-sop8.kicad_sym",
    "stc8g1k17a-36i-sop8.kicad_mod",
    "stc8g1k17a-36i-sop8.glb",
    "stc8g1k17a-36i-sop8.step",
    "stc8g1k17a-36i-sop8.lbr",
    "docs/hero.png",
    "docs/stc8g1k17a-36i-sop8-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stc8g1k17a-36i-sop8-hero.glb",
    "stc8g1k17a-36i-sop8-hero.overlay.json",
    "stc8g1k17a-36i-sop8-etched.glb",
    "stc8g1k17a-36i-sop8-etched.step"
  ],
  "visibility": "public",
  "description": "STC Micro Microcontroller Units (MCUs/MPUs/SOCs), HSOP-8(3.9x4.9). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}