Generated by kicad-footprint-generator · KiCad file format 20260206
STC8G1K17A-36I-SOP8
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · HSOP-8(3.9x4.9)
STC8G1K17A-36I-SOP8 from STC Micro, in a HSOP-8(3.9x4.9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P5.4 | bidirectional | Standard I/O port P5.4 that can also be configured as the active-low reset input NRST, and whose internal 4K pull-up stays on when used as reset; as a plain I/O it stays high for about 6.5 ms after power-up, so external circuits must allow for that. |
| 2 | Vcc | power_in | Power supply pin (AVcc is the ADC supply on the same pin); the datasheet gives an operating voltage of 1.9V to 5.5V. |
| 3 | P5.5 | bidirectional | Standard I/O port P5.5 that also carries alternate functions INT3, T1, T0CLKO, TxD_3, SS, SDA_2, ADC5, ECI, ECI_2 and CCP2_3. |
| 4 | Gnd/AGnd | power_in | Ground pin (AGnd is the ADC ground on the same pin). |
| 5 | P3.0 | bidirectional | Standard I/O port P3.0 that also carries RxD (UART1 receive), INT4 external interrupt 4 and ADC0 analog input channel 0; it is weak-pull-up/quasi-bidirectional after power-up and is used for USB ISP download detection. |
| 6 | P3.1 | bidirectional | Standard I/O port P3.1 that also carries TxD (UART1 transmit), ADC1 analog input channel 1, ECI_3 and CCP0_2; it is weak-pull-up/quasi-bidirectional after power-up and is used for USB ISP download detection. |
| 7 | P3.2 | bidirectional | Standard I/O port P3.2 that also carries INT0 external interrupt 0, SCLK (SPI clock), SCL (I2C clock), RxD_2, ADC2 analog input channel 2, CCP0 and CCP0_3. |
| 8 | P3.3 | bidirectional | Standard I/O port P3.3 that also carries INT1 external interrupt 1, MISO (SPI master-in slave-out), SDA (I2C data), TxD_2, ADC3 analog input channel 3, CCP1, CCP1_2 and CCP1_3. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | HSOP-8(3.9x4.9) |
| Category | Embedded Processors & Controllers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作电压 | 1.9 | 5.5 | V | 1052 | |||
| VDD 对地电压 | VDD | -0.3 | 5.5 | V | 1052 | ||
| I/O 口对地电压 | -0.3 | V | printed max is VDD+0.3 V (formula, not a number) | 1052 | |||
| 存储温度 | -55 | 150 | ℃ | 1052 | |||
| 工作温度 | -40 | 85 | ℃ | 1052 | |||
| 热阻 | 165 | ℃/W | 1052 | ||||
| VIL1 输入低电平 | VIL1 | 0.99 | V | VSS=0V, VDD=3.3V, 25℃; 打开施密特触发 | 1053 | ||
| VIL1 输入低电平 | VIL1 | 1.07 | V | VSS=0V, VDD=3.3V, 25℃; 关闭施密特触发 | 1053 | ||
| VIH1 输入高电平(普通 I/O) | VIH1 | 1.18 | V | VSS=0V, VDD=3.3V, 25℃; 打开施密特触发 | 1053 | ||
| VIH1 输入高电平(普通 I/O) | VIH1 | 1.09 | V | VSS=0V, VDD=3.3V, 25℃; 关闭施密特触发 | 1053 | ||
| 逻辑 0 输入电流 | IIL | 50 | uA | VSS=0V, VDD=3.3V, 25℃; 端口电压 0V | 1053 | ||
| 逻辑 1 到 0 的转移电流 | ITL | 100 | 270 | 600 | uA | VSS=0V, VDD=3.3V, 25℃; 端口电压 2.0V | 1053 |
| I/O 口上拉电阻 | RPU | 5.8 | 5.9 | 6 | KΩ | VSS=0V, VDD=3.3V, 25℃ | 1053 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following | 548 |
CAD (KiCad official)
- Symbol:
STC8G1K17A-36I-SOP8 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: HSOP-8(3.9x4.9) (KiCad packages3D, STEP)
- 3D model files:
stc8g1k17a-36i-sop8-etched.step/stc8g1k17a-36i-sop8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc8g1k17a-36i-sop8.step/stc8g1k17a-36i-sop8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1240 pp, sha256
7d5e82c9f651aa92, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).