main
Ray
Publish 0.1.0
34cea74
STC12C5A32S2-35I-LQFP44
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)
STC12C5A32S2-35I-LQFP44 from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.5/MOSI/ADC5 | bidirectional | Port 1.5 general I/O (20mA drive) that can also be SPI MOSI or 10-bit ADC input channel 5. |
| 2 | P1.6/MISO/ADC6 | bidirectional | Port 1.6 general I/O (20mA drive) that can also be SPI MISO or 10-bit ADC input channel 6. |
| 3 | P1.7/SCLK/ADC7 | bidirectional | Port 1.7 general I/O (20mA drive) that can also be SPI clock or 10-bit ADC input channel 7. |
| 4 | RST/P4.7 | bidirectional | Reset input or Port 4.7 I/O, selected at ISP programming; if set as P4.7 an external clock must be used. |
| 5 | P3.0/RxD | bidirectional | Port 3.0 general I/O that is also UART1 receive (RxD) and a power-down wake-up pin. |
| 6 | P4.3/SCLK/TxD2/CCP1 | bidirectional | Port 4.3 general I/O that is the alternate location of SPI clock, UART2 TxD and PCA/PWM channel 1 (CCP1) when the AUXR1 switch bits are set. |
| 7 | P3.1/TxD | bidirectional | Port 3.1 general I/O that is also UART1 transmit (TxD). |
| 8 | P3.2/INT0 | bidirectional | Port 3.2 general I/O that is also external interrupt 0 (falling edge or low level) and a power-down wake-up pin. |
| 9 | P3.3/INT1 | bidirectional | Port 3.3 general I/O that is also external interrupt 1 (falling edge or low level) and a power-down wake-up pin. |
| 10 | P3.4/T0/CLKOUT0 | bidirectional | Port 3.4 general I/O that is also Timer 0 external input, Timer 0 overflow clock output (CLKOUT0) and a power-down wake-up pin. |
| 11 | P3.5/T1/CLKOUT1 | bidirectional | Port 3.5 general I/O that is also Timer 1 external input, Timer 1 overflow clock output (CLKOUT1) and a power-down wake-up pin. |
| 12 | P3.6/WR | bidirectional | Port 3.6 general I/O that is also the external data memory write strobe (WR). |
| 13 | P3.7/RD | bidirectional | Port 3.7 general I/O that is also the external data memory read strobe (RD). |
| 14 | XTAL2 | output | Crystal oscillator output; left floating when an external clock is fed to XTAL1 or when the internal R/C oscillator is used. |
| 15 | XTAL1 | input | Crystal oscillator input, or direct external clock input. |
| 16 | Gnd | power_in | Ground. |
| 17 | P4.0/SS | bidirectional | Port 4.0 general I/O that is the alternate location of the SPI slave-select (SS) when the SPI is switched to Port 4. |
| 18 | P2.0 | bidirectional | Port 2.0 general I/O (20mA drive), quasi-bidirectional after reset. |
| 19 | P2.1 | bidirectional | Port 2.1 general I/O (20mA drive), quasi-bidirectional after reset. |
| 20 | P2.2 | bidirectional | Port 2.2 general I/O (20mA drive), quasi-bidirectional after reset. |
| 21 | P2.3 | bidirectional | Port 2.3 general I/O (20mA drive), quasi-bidirectional after reset. |
| 22 | P2.4 | bidirectional | Port 2.4 general I/O (20mA drive), quasi-bidirectional after reset. |
| 23 | P2.5 | bidirectional | Port 2.5 general I/O (20mA drive), quasi-bidirectional after reset. |
| 24 | P2.6 | bidirectional | Port 2.6 general I/O (20mA drive), quasi-bidirectional after reset. |
| 25 | P2.7 | bidirectional | Port 2.7 general I/O (20mA drive), quasi-bidirectional after reset. |
| 26 | P4.4/NA | bidirectional | After reset this pin is a weak pull-up with no function; setting P4SW.4=1 makes it I/O port P4.4. |
| 27 | P4.5/ALE | bidirectional | After reset this pin is the ALE signal, output only during MOVX access to external devices; setting P4SW.5=1 makes it I/O port P4.5. |
| 28 | P4.1/ECI/MOSI | bidirectional | Port 4.1 general I/O that is the alternate location of the PCA external clock input (ECI) and SPI MOSI when switched to Port 4. |
| 29 | P4.6/EX_LVD/RST2 | bidirectional | After reset this pin is the external low-voltage detect input and second reset function (RST2); setting P4SW.6=1 makes it I/O port P4.6. |
| 30 | P0.7 | bidirectional | Port 0.7 general I/O (20mA drive), quasi-bidirectional after reset. |
| 31 | P0.6 | bidirectional | Port 0.6 general I/O (20mA drive), quasi-bidirectional after reset. |
| 32 | P0.5 | bidirectional | Port 0.5 general I/O (20mA drive), quasi-bidirectional after reset. |
| 33 | P0.4 | bidirectional | Port 0.4 general I/O (20mA drive), quasi-bidirectional after reset. |
| 34 | P0.3 | bidirectional | Port 0.3 general I/O (20mA drive), quasi-bidirectional after reset. |
| 35 | P0.2 | bidirectional | Port 0.2 general I/O (20mA drive), quasi-bidirectional after reset. |
| 36 | P0.1 | bidirectional | Port 0.1 general I/O (20mA drive), quasi-bidirectional after reset. |
| 37 | P0.0 | bidirectional | Port 0.0 general I/O (20mA drive), quasi-bidirectional after reset. |
| 38 | Vcc | power_in | Positive supply; operating range 5.5V to 3.5V for the STC12C5A60S2 series. |
| 39 | P4.2/MISO/RxD2/CCP0 | bidirectional | Port 4.2 general I/O that is the alternate location of SPI MISO, UART2 RxD2 and PCA/PWM channel 0 (CCP0) when switched to Port 4. |
| 40 | P1.0/ADC0/CLKOUT2 | bidirectional | Port 1.0 general I/O that can also be 10-bit ADC input channel 0 or the BRT baud-rate timer clock output (CLKOUT2). |
| 41 | P1.1/ADC1 | bidirectional | Port 1.1 general I/O that can also be 10-bit ADC input channel 1. |
| 42 | P1.2/ADC2/RxD2/ECI | bidirectional | Port 1.2 general I/O that can also be ADC input channel 2, UART2 receive (RxD2) or PCA external clock input (ECI). |
| 43 | P1.3/ADC3/TxD2/CCP0 | bidirectional | Port 1.3 general I/O that can also be ADC input channel 3, UART2 transmit (TxD2) or PCA/PWM channel 0 (CCP0). |
| 44 | P1.4/ADC4/SS/CCP1 | bidirectional | Port 1.4 general I/O that can also be ADC input channel 4, SPI slave select (SS) or PCA/PWM channel 1 (CCP1). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Power Supply (5V MCU), operating voltage | VDD | 3.3 | 5 | 5.5 | V | 306 | |
| Input high voltage (RESET) | VIH2 | 2.2 | V | 5V | 306 | ||
| Input high voltage (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 306 | ||
| Input low voltage (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 306 | ||
| Power Down Current | IPWDN | 0.1 | uA | 5V | 306 | ||
| Idle Current | IIDLE | 3 | mA | 5V | 306 | ||
| Operating Current | ICC | 20 | mA | 5V | 306 | ||
| Sinking Current for Output Low (P0,P1,P2,P3) | IOL1 | 20 | mA | 5V, Vpin=0.45V | 306 | ||
| Sourcing Current for Output High, quasi-output (P0,P1,P2,P3) | IOH1 | 150 | 230 | uA | 5V | 306 | |
| Sourcing Current for Output High, push-pull strong-output (P0,P1,P2,P3) | IOH2 | 20 | mA | 5V, Vpin=2.4V | 306 | ||
| Logic 0 input current (P0,P1,P2,P3) | IIL | 50 | uA | VPIN=0V | 306 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | VPIN=2V | 306 |
| Storage temperature | TST | -55 | 125 | ℃ | 306 | ||
| Operating Temperature (I), industrial grade | TA | -40 | 85 | ℃ | 306 | ||
| DC Power Supply (5V MCU) | VDD-VSS | -0.3 | 5.5 | V | 306 | ||
| Voltage on any pin | -0.3 | V | 306 |
CAD (KiCad official)
- Symbol:
STC12C5A32S2-35I-LQFP44 - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
stc12c5a32s2-35i-lqfp44-etched.step/stc12c5a32s2-35i-lqfp44-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc12c5a32s2-35i-lqfp44.step/stc12c5a32s2-35i-lqfp44.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1543 pp, sha256
7fde44da8887b7a0, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STC12C5A32S2-35I-LQFP44
**STC Micro** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)
STC12C5A32S2-35I-LQFP44 from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.5/MOSI/ADC5 | bidirectional | Port 1.5 general I/O (20mA drive) that can also be SPI MOSI or 10-bit ADC input channel 5. |
| 2 | P1.6/MISO/ADC6 | bidirectional | Port 1.6 general I/O (20mA drive) that can also be SPI MISO or 10-bit ADC input channel 6. |
| 3 | P1.7/SCLK/ADC7 | bidirectional | Port 1.7 general I/O (20mA drive) that can also be SPI clock or 10-bit ADC input channel 7. |
| 4 | RST/P4.7 | bidirectional | Reset input or Port 4.7 I/O, selected at ISP programming; if set as P4.7 an external clock must be used. |
| 5 | P3.0/RxD | bidirectional | Port 3.0 general I/O that is also UART1 receive (RxD) and a power-down wake-up pin. |
| 6 | P4.3/SCLK/TxD2/CCP1 | bidirectional | Port 4.3 general I/O that is the alternate location of SPI clock, UART2 TxD and PCA/PWM channel 1 (CCP1) when the AUXR1 switch bits are set. |
| 7 | P3.1/TxD | bidirectional | Port 3.1 general I/O that is also UART1 transmit (TxD). |
| 8 | P3.2/INT0 | bidirectional | Port 3.2 general I/O that is also external interrupt 0 (falling edge or low level) and a power-down wake-up pin. |
| 9 | P3.3/INT1 | bidirectional | Port 3.3 general I/O that is also external interrupt 1 (falling edge or low level) and a power-down wake-up pin. |
| 10 | P3.4/T0/CLKOUT0 | bidirectional | Port 3.4 general I/O that is also Timer 0 external input, Timer 0 overflow clock output (CLKOUT0) and a power-down wake-up pin. |
| 11 | P3.5/T1/CLKOUT1 | bidirectional | Port 3.5 general I/O that is also Timer 1 external input, Timer 1 overflow clock output (CLKOUT1) and a power-down wake-up pin. |
| 12 | P3.6/WR | bidirectional | Port 3.6 general I/O that is also the external data memory write strobe (WR). |
| 13 | P3.7/RD | bidirectional | Port 3.7 general I/O that is also the external data memory read strobe (RD). |
| 14 | XTAL2 | output | Crystal oscillator output; left floating when an external clock is fed to XTAL1 or when the internal R/C oscillator is used. |
| 15 | XTAL1 | input | Crystal oscillator input, or direct external clock input. |
| 16 | Gnd | power_in | Ground. |
| 17 | P4.0/SS | bidirectional | Port 4.0 general I/O that is the alternate location of the SPI slave-select (SS) when the SPI is switched to Port 4. |
| 18 | P2.0 | bidirectional | Port 2.0 general I/O (20mA drive), quasi-bidirectional after reset. |
| 19 | P2.1 | bidirectional | Port 2.1 general I/O (20mA drive), quasi-bidirectional after reset. |
| 20 | P2.2 | bidirectional | Port 2.2 general I/O (20mA drive), quasi-bidirectional after reset. |
| 21 | P2.3 | bidirectional | Port 2.3 general I/O (20mA drive), quasi-bidirectional after reset. |
| 22 | P2.4 | bidirectional | Port 2.4 general I/O (20mA drive), quasi-bidirectional after reset. |
| 23 | P2.5 | bidirectional | Port 2.5 general I/O (20mA drive), quasi-bidirectional after reset. |
| 24 | P2.6 | bidirectional | Port 2.6 general I/O (20mA drive), quasi-bidirectional after reset. |
| 25 | P2.7 | bidirectional | Port 2.7 general I/O (20mA drive), quasi-bidirectional after reset. |
| 26 | P4.4/NA | bidirectional | After reset this pin is a weak pull-up with no function; setting P4SW.4=1 makes it I/O port P4.4. |
| 27 | P4.5/ALE | bidirectional | After reset this pin is the ALE signal, output only during MOVX access to external devices; setting P4SW.5=1 makes it I/O port P4.5. |
| 28 | P4.1/ECI/MOSI | bidirectional | Port 4.1 general I/O that is the alternate location of the PCA external clock input (ECI) and SPI MOSI when switched to Port 4. |
| 29 | P4.6/EX_LVD/RST2 | bidirectional | After reset this pin is the external low-voltage detect input and second reset function (RST2); setting P4SW.6=1 makes it I/O port P4.6. |
| 30 | P0.7 | bidirectional | Port 0.7 general I/O (20mA drive), quasi-bidirectional after reset. |
| 31 | P0.6 | bidirectional | Port 0.6 general I/O (20mA drive), quasi-bidirectional after reset. |
| 32 | P0.5 | bidirectional | Port 0.5 general I/O (20mA drive), quasi-bidirectional after reset. |
| 33 | P0.4 | bidirectional | Port 0.4 general I/O (20mA drive), quasi-bidirectional after reset. |
| 34 | P0.3 | bidirectional | Port 0.3 general I/O (20mA drive), quasi-bidirectional after reset. |
| 35 | P0.2 | bidirectional | Port 0.2 general I/O (20mA drive), quasi-bidirectional after reset. |
| 36 | P0.1 | bidirectional | Port 0.1 general I/O (20mA drive), quasi-bidirectional after reset. |
| 37 | P0.0 | bidirectional | Port 0.0 general I/O (20mA drive), quasi-bidirectional after reset. |
| 38 | Vcc | power_in | Positive supply; operating range 5.5V to 3.5V for the STC12C5A60S2 series. |
| 39 | P4.2/MISO/RxD2/CCP0 | bidirectional | Port 4.2 general I/O that is the alternate location of SPI MISO, UART2 RxD2 and PCA/PWM channel 0 (CCP0) when switched to Port 4. |
| 40 | P1.0/ADC0/CLKOUT2 | bidirectional | Port 1.0 general I/O that can also be 10-bit ADC input channel 0 or the BRT baud-rate timer clock output (CLKOUT2). |
| 41 | P1.1/ADC1 | bidirectional | Port 1.1 general I/O that can also be 10-bit ADC input channel 1. |
| 42 | P1.2/ADC2/RxD2/ECI | bidirectional | Port 1.2 general I/O that can also be ADC input channel 2, UART2 receive (RxD2) or PCA external clock input (ECI). |
| 43 | P1.3/ADC3/TxD2/CCP0 | bidirectional | Port 1.3 general I/O that can also be ADC input channel 3, UART2 transmit (TxD2) or PCA/PWM channel 0 (CCP0). |
| 44 | P1.4/ADC4/SS/CCP1 | bidirectional | Port 1.4 general I/O that can also be ADC input channel 4, SPI slave select (SS) or PCA/PWM channel 1 (CCP1). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Power Supply (5V MCU), operating voltage | VDD | 3.3 | 5 | 5.5 | V | | 306 |
| Input high voltage (RESET) | VIH2 | 2.2 | | | V | 5V | 306 |
| Input high voltage (P0,P1,P2,P3) | VIH1 | 2 | | | V | 5V | 306 |
| Input low voltage (P0,P1,P2,P3) | VIL1 | | | 0.8 | V | 5V | 306 |
| Power Down Current | IPWDN | | | 0.1 | uA | 5V | 306 |
| Idle Current | IIDLE | | | 3 | mA | 5V | 306 |
| Operating Current | ICC | | | 20 | mA | 5V | 306 |
| Sinking Current for Output Low (P0,P1,P2,P3) | IOL1 | 20 | | | mA | 5V, Vpin=0.45V | 306 |
| Sourcing Current for Output High, quasi-output (P0,P1,P2,P3) | IOH1 | | 150 | 230 | uA | 5V | 306 |
| Sourcing Current for Output High, push-pull strong-output (P0,P1,P2,P3) | IOH2 | 20 | | | mA | 5V, Vpin=2.4V | 306 |
| Logic 0 input current (P0,P1,P2,P3) | IIL | | | 50 | uA | VPIN=0V | 306 |
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | VPIN=2V | 306 |
| Storage temperature | TST | -55 | | 125 | ℃ | | 306 |
| Operating Temperature (I), industrial grade | TA | -40 | | 85 | ℃ | | 306 |
| DC Power Supply (5V MCU) | VDD-VSS | -0.3 | | 5.5 | V | | 306 |
| Voltage on any pin | | -0.3 | | | V | | 306 |
## CAD (KiCad official)
- Symbol: `STC12C5A32S2-35I-LQFP44`
- Footprint: `Package_QFP:LQFP-44_10x10mm_P0.8mm`
- 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files: `stc12c5a32s2-35i-lqfp44-etched.step` / `stc12c5a32s2-35i-lqfp44-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stc12c5a32s2-35i-lqfp44.step` / `stc12c5a32s2-35i-lqfp44.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STC Micro datasheet](docs/stc12c5a32s2-35i-lqfp44-datasheet.pdf) (1543 pp, sha256 `7fde44da8887b7a0`, retrieved 2026-11-13, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stc12c5a32s2-35i-lqfp44-datasheet.pdf)