Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STC12C5A32S2-35I-LQFP44

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)

STC12C5A32S2-35I-LQFP44 from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.5/MOSI/ADC5 bidirectional Port 1.5 general I/O (20mA drive) that can also be SPI MOSI or 10-bit ADC input channel 5.
2 P1.6/MISO/ADC6 bidirectional Port 1.6 general I/O (20mA drive) that can also be SPI MISO or 10-bit ADC input channel 6.
3 P1.7/SCLK/ADC7 bidirectional Port 1.7 general I/O (20mA drive) that can also be SPI clock or 10-bit ADC input channel 7.
4 RST/P4.7 bidirectional Reset input or Port 4.7 I/O, selected at ISP programming; if set as P4.7 an external clock must be used.
5 P3.0/RxD bidirectional Port 3.0 general I/O that is also UART1 receive (RxD) and a power-down wake-up pin.
6 P4.3/SCLK/TxD2/CCP1 bidirectional Port 4.3 general I/O that is the alternate location of SPI clock, UART2 TxD and PCA/PWM channel 1 (CCP1) when the AUXR1 switch bits are set.
7 P3.1/TxD bidirectional Port 3.1 general I/O that is also UART1 transmit (TxD).
8 P3.2/INT0 bidirectional Port 3.2 general I/O that is also external interrupt 0 (falling edge or low level) and a power-down wake-up pin.
9 P3.3/INT1 bidirectional Port 3.3 general I/O that is also external interrupt 1 (falling edge or low level) and a power-down wake-up pin.
10 P3.4/T0/CLKOUT0 bidirectional Port 3.4 general I/O that is also Timer 0 external input, Timer 0 overflow clock output (CLKOUT0) and a power-down wake-up pin.
11 P3.5/T1/CLKOUT1 bidirectional Port 3.5 general I/O that is also Timer 1 external input, Timer 1 overflow clock output (CLKOUT1) and a power-down wake-up pin.
12 P3.6/WR bidirectional Port 3.6 general I/O that is also the external data memory write strobe (WR).
13 P3.7/RD bidirectional Port 3.7 general I/O that is also the external data memory read strobe (RD).
14 XTAL2 output Crystal oscillator output; left floating when an external clock is fed to XTAL1 or when the internal R/C oscillator is used.
15 XTAL1 input Crystal oscillator input, or direct external clock input.
16 Gnd power_in Ground.
17 P4.0/SS bidirectional Port 4.0 general I/O that is the alternate location of the SPI slave-select (SS) when the SPI is switched to Port 4.
18 P2.0 bidirectional Port 2.0 general I/O (20mA drive), quasi-bidirectional after reset.
19 P2.1 bidirectional Port 2.1 general I/O (20mA drive), quasi-bidirectional after reset.
20 P2.2 bidirectional Port 2.2 general I/O (20mA drive), quasi-bidirectional after reset.
21 P2.3 bidirectional Port 2.3 general I/O (20mA drive), quasi-bidirectional after reset.
22 P2.4 bidirectional Port 2.4 general I/O (20mA drive), quasi-bidirectional after reset.
23 P2.5 bidirectional Port 2.5 general I/O (20mA drive), quasi-bidirectional after reset.
24 P2.6 bidirectional Port 2.6 general I/O (20mA drive), quasi-bidirectional after reset.
25 P2.7 bidirectional Port 2.7 general I/O (20mA drive), quasi-bidirectional after reset.
26 P4.4/NA bidirectional After reset this pin is a weak pull-up with no function; setting P4SW.4=1 makes it I/O port P4.4.
27 P4.5/ALE bidirectional After reset this pin is the ALE signal, output only during MOVX access to external devices; setting P4SW.5=1 makes it I/O port P4.5.
28 P4.1/ECI/MOSI bidirectional Port 4.1 general I/O that is the alternate location of the PCA external clock input (ECI) and SPI MOSI when switched to Port 4.
29 P4.6/EX_LVD/RST2 bidirectional After reset this pin is the external low-voltage detect input and second reset function (RST2); setting P4SW.6=1 makes it I/O port P4.6.
30 P0.7 bidirectional Port 0.7 general I/O (20mA drive), quasi-bidirectional after reset.
31 P0.6 bidirectional Port 0.6 general I/O (20mA drive), quasi-bidirectional after reset.
32 P0.5 bidirectional Port 0.5 general I/O (20mA drive), quasi-bidirectional after reset.
33 P0.4 bidirectional Port 0.4 general I/O (20mA drive), quasi-bidirectional after reset.
34 P0.3 bidirectional Port 0.3 general I/O (20mA drive), quasi-bidirectional after reset.
35 P0.2 bidirectional Port 0.2 general I/O (20mA drive), quasi-bidirectional after reset.
36 P0.1 bidirectional Port 0.1 general I/O (20mA drive), quasi-bidirectional after reset.
37 P0.0 bidirectional Port 0.0 general I/O (20mA drive), quasi-bidirectional after reset.
38 Vcc power_in Positive supply; operating range 5.5V to 3.5V for the STC12C5A60S2 series.
39 P4.2/MISO/RxD2/CCP0 bidirectional Port 4.2 general I/O that is the alternate location of SPI MISO, UART2 RxD2 and PCA/PWM channel 0 (CCP0) when switched to Port 4.
40 P1.0/ADC0/CLKOUT2 bidirectional Port 1.0 general I/O that can also be 10-bit ADC input channel 0 or the BRT baud-rate timer clock output (CLKOUT2).
41 P1.1/ADC1 bidirectional Port 1.1 general I/O that can also be 10-bit ADC input channel 1.
42 P1.2/ADC2/RxD2/ECI bidirectional Port 1.2 general I/O that can also be ADC input channel 2, UART2 receive (RxD2) or PCA external clock input (ECI).
43 P1.3/ADC3/TxD2/CCP0 bidirectional Port 1.3 general I/O that can also be ADC input channel 3, UART2 transmit (TxD2) or PCA/PWM channel 0 (CCP0).
44 P1.4/ADC4/SS/CCP1 bidirectional Port 1.4 general I/O that can also be ADC input channel 4, SPI slave select (SS) or PCA/PWM channel 1 (CCP1).

Key specifications

Parameter Value
Manufacturer STC Micro
Package LQFP-44(10x10)
Category Embedded Processors & Controllers
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC Power Supply (5V MCU), operating voltage VDD 3.3 5 5.5 V 306
Input high voltage (RESET) VIH2 2.2 V 5V 306
Input high voltage (P0,P1,P2,P3) VIH1 2 V 5V 306
Input low voltage (P0,P1,P2,P3) VIL1 0.8 V 5V 306
Power Down Current IPWDN 0.1 uA 5V 306
Idle Current IIDLE 3 mA 5V 306
Operating Current ICC 20 mA 5V 306
Sinking Current for Output Low (P0,P1,P2,P3) IOL1 20 mA 5V, Vpin=0.45V 306
Sourcing Current for Output High, quasi-output (P0,P1,P2,P3) IOH1 150 230 uA 5V 306
Sourcing Current for Output High, push-pull strong-output (P0,P1,P2,P3) IOH2 20 mA 5V, Vpin=2.4V 306
Logic 0 input current (P0,P1,P2,P3) IIL 50 uA VPIN=0V 306
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 100 270 600 uA VPIN=2V 306
Storage temperature TST -55 125 ℃ 306
Operating Temperature (I), industrial grade TA -40 85 ℃ 306
DC Power Supply (5V MCU) VDD-VSS -0.3 5.5 V 306
Voltage on any pin -0.3 V 306

CAD (KiCad official)

  • Symbol: STC12C5A32S2-35I-LQFP44
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: stc12c5a32s2-35i-lqfp44-etched.step / stc12c5a32s2-35i-lqfp44-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc12c5a32s2-35i-lqfp44.step / stc12c5a32s2-35i-lqfp44.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (1543 pp, sha256 7fde44da8887b7a0, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF