main
Ray Publish 0.1.0 31cd7fc

STC12C5608AD-35I-TSSOP20

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20

STC12C5608AD-35I-TSSOP20 from STC Micro, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RST input Reset pin (复位脚): holding RST high for at least 24 clock cycles plus 10 µs resets the MCU, and pulling it back low ends the reset so execution starts at 0000H.
2 P3.0/RxD bidirectional Standard quasi-bidirectional I/O PORT3[0], also the serial UART receive data input RxD.
3 P3.1/TxD bidirectional Standard quasi-bidirectional I/O PORT3[1], also the serial UART transmit data output TxD.
4 XTAL2 output Output of the internal clock inverting amplifier that connects to the other terminal of an external crystal; it may be left floating when an external clock is driven into XTAL1.
5 XTAL1 input Input to the internal clock inverting amplifier that connects to one terminal of an external crystal; when an external clock source is used, this pin is its input.
6 P3.2/INT0 bidirectional Standard I/O PORT3[2], also external interrupt 0 which triggers on a falling edge or a low level.
7 P3.3/INT1 bidirectional Standard I/O PORT3[3], also external interrupt 1 which triggers on a falling edge or a low level.
8 P3.4/T0/ECI bidirectional Standard I/O PORT3[4], also the external input of Timer/Counter 0 (T0) and the external pulse input ECI for the PCA counter.
9 P3.5/T1/PCA1/PWM1 bidirectional Standard I/O PORT3[5], also the external input of Timer/Counter 1 (T1), PCA output 1 and PWM output 1.
10 GND power_in Power supply negative terminal (电源负极), connected to system ground.
11 P3.7/PCA0/PWM0 bidirectional Standard I/O PORT3[7], also PCA output 0 and PWM output 0.
12 P1.0/ADC0/CLKOUT0 bidirectional Standard I/O PORT1[0], also ADC input channel 0, and Timer 0 clock output CLKOUT0 when enabled through WAKE_CLKO[0]/T0CLKO.
13 P1.1/ADC1/CLKOUT1 bidirectional Standard I/O PORT1[1], also ADC input channel 1, and Timer 1 clock output CLKOUT1 when enabled through WAKE_CLKO[1]/T1CLKO.
14 P1.2/ADC2 bidirectional Standard I/O PORT1[2], also ADC input channel 2.
15 P1.3/ADC3 bidirectional Standard I/O PORT1[3], also ADC input channel 3.
16 P1.4/ADC4/SS bidirectional Standard I/O PORT1[4], also ADC input channel 4 and the SPI slave select signal SS.
17 P1.5/ADC5/MOSI bidirectional Standard I/O PORT1[5], also ADC input channel 5 and the SPI master-out slave-in signal MOSI.
18 P1.6/ADC6/MISO bidirectional Standard I/O PORT1[6], also ADC input channel 6 and the SPI master-in slave-out signal MISO.
19 P1.7/ADC7/SCLK bidirectional Standard I/O PORT1[7], also ADC input channel 7 and the SPI serial clock signal SCLK.
20 VCC power_in Power supply positive terminal (电源正极) for the MCU.

Key specifications

Parameter Value
Manufacturer STC Micro
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TST -55 125 ℃ 434
Operating temperature (I) TA -40 85 ℃ 434
DC power supply (5V) VDD - VSS -0.3 6 V 434
Voltage on any pin -0.5 5.5 V 434
Operating Voltage VDD 3.5 5 5.5 V 434
Operating Current ICC 4 20 mA 5V 434
Input Low Voltage(P0,P1,P2,P3) VIL1 0.8 V 5V 434
Input Low Voltage (RESET, XTAL1) VIL2 1.5 V 5V 434
Input High Voltage (P0,P1,P2,P3) VIH1 2 V 5V 434
Input High Voltage (RESET) VIH2 3 V 5V 434
Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) IOH1 150 230 uA 5V 434
Logic 0 input current (P0,P1,P2,P3) IIL 18 50 uA Vpin=0V 434
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 270 600 uA Vpin=2.0V 434

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the 165

CAD (KiCad official)

  • Symbol: STC12C5608AD-35I-TSSOP20
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: stc12c5608ad-35i-tssop20-etched.step / stc12c5608ad-35i-tssop20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc12c5608ad-35i-tssop20.step / stc12c5608ad-35i-tssop20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (449 pp, sha256 05a166d7771d925a, retrieved 2026-10-28, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF