Generated by kicad-footprint-generator · KiCad file format 20260206
STC12C5608AD-35I-TSSOP20
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
STC12C5608AD-35I-TSSOP20 from STC Micro, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | input | Reset pin (复位脚): holding RST high for at least 24 clock cycles plus 10 µs resets the MCU, and pulling it back low ends the reset so execution starts at 0000H. |
| 2 | P3.0/RxD | bidirectional | Standard quasi-bidirectional I/O PORT3[0], also the serial UART receive data input RxD. |
| 3 | P3.1/TxD | bidirectional | Standard quasi-bidirectional I/O PORT3[1], also the serial UART transmit data output TxD. |
| 4 | XTAL2 | output | Output of the internal clock inverting amplifier that connects to the other terminal of an external crystal; it may be left floating when an external clock is driven into XTAL1. |
| 5 | XTAL1 | input | Input to the internal clock inverting amplifier that connects to one terminal of an external crystal; when an external clock source is used, this pin is its input. |
| 6 | P3.2/INT0 | bidirectional | Standard I/O PORT3[2], also external interrupt 0 which triggers on a falling edge or a low level. |
| 7 | P3.3/INT1 | bidirectional | Standard I/O PORT3[3], also external interrupt 1 which triggers on a falling edge or a low level. |
| 8 | P3.4/T0/ECI | bidirectional | Standard I/O PORT3[4], also the external input of Timer/Counter 0 (T0) and the external pulse input ECI for the PCA counter. |
| 9 | P3.5/T1/PCA1/PWM1 | bidirectional | Standard I/O PORT3[5], also the external input of Timer/Counter 1 (T1), PCA output 1 and PWM output 1. |
| 10 | GND | power_in | Power supply negative terminal (电源负极), connected to system ground. |
| 11 | P3.7/PCA0/PWM0 | bidirectional | Standard I/O PORT3[7], also PCA output 0 and PWM output 0. |
| 12 | P1.0/ADC0/CLKOUT0 | bidirectional | Standard I/O PORT1[0], also ADC input channel 0, and Timer 0 clock output CLKOUT0 when enabled through WAKE_CLKO[0]/T0CLKO. |
| 13 | P1.1/ADC1/CLKOUT1 | bidirectional | Standard I/O PORT1[1], also ADC input channel 1, and Timer 1 clock output CLKOUT1 when enabled through WAKE_CLKO[1]/T1CLKO. |
| 14 | P1.2/ADC2 | bidirectional | Standard I/O PORT1[2], also ADC input channel 2. |
| 15 | P1.3/ADC3 | bidirectional | Standard I/O PORT1[3], also ADC input channel 3. |
| 16 | P1.4/ADC4/SS | bidirectional | Standard I/O PORT1[4], also ADC input channel 4 and the SPI slave select signal SS. |
| 17 | P1.5/ADC5/MOSI | bidirectional | Standard I/O PORT1[5], also ADC input channel 5 and the SPI master-out slave-in signal MOSI. |
| 18 | P1.6/ADC6/MISO | bidirectional | Standard I/O PORT1[6], also ADC input channel 6 and the SPI master-in slave-out signal MISO. |
| 19 | P1.7/ADC7/SCLK | bidirectional | Standard I/O PORT1[7], also ADC input channel 7 and the SPI serial clock signal SCLK. |
| 20 | VCC | power_in | Power supply positive terminal (电源正极) for the MCU. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TST | -55 | 125 | ℃ | 434 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 434 | ||
| DC power supply (5V) | VDD - VSS | -0.3 | 6 | V | 434 | ||
| Voltage on any pin | -0.5 | 5.5 | V | 434 | |||
| Operating Voltage | VDD | 3.5 | 5 | 5.5 | V | 434 | |
| Operating Current | ICC | 4 | 20 | mA | 5V | 434 | |
| Input Low Voltage(P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 434 | ||
| Input Low Voltage (RESET, XTAL1) | VIL2 | 1.5 | V | 5V | 434 | ||
| Input High Voltage (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 434 | ||
| Input High Voltage (RESET) | VIH2 | 3 | V | 5V | 434 | ||
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 150 | 230 | uA | 5V | 434 | |
| Logic 0 input current (P0,P1,P2,P3) | IIL | 18 | 50 | uA | Vpin=0V | 434 | |
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 270 | 600 | uA | Vpin=2.0V | 434 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 165 |
CAD (KiCad official)
- Symbol:
STC12C5608AD-35I-TSSOP20 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
stc12c5608ad-35i-tssop20-etched.step/stc12c5608ad-35i-tssop20-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc12c5608ad-35i-tssop20.step/stc12c5608ad-35i-tssop20.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (449 pp, sha256
05a166d7771d925a, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).