main
Ray
Publish 0.1.0
e002cc9
STC12C5608AD-35I-SOP20
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-20-300mil
STC12C5608AD-35I-SOP20 from STC Micro, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | input | Reset input: holding RST high for at least 24 clock cycles plus 10 us resets the MCU, and after RST is pulled low the MCU starts executing from address 0000H. |
| 2 | P3.0/RxD | bidirectional | Standard I/O port PORT3[0] that also serves as the serial port RxD receive input, and P3.0 falling edge can set RI and wake the MCU from power-down mode when enabled. |
| 3 | P3.1/TxD | bidirectional | Standard I/O port PORT3[1] that also serves as the serial port TxD transmit output. |
| 4 | XTAL2 | output | Output of the internal clock circuit inverting amplifier for the external crystal; it may be left floating when an external clock is driven into XTAL1. |
| 5 | XTAL1 | input | Input to the internal clock circuit inverting amplifier for one side of the external crystal, and the clock input when an external clock source is used. |
| 6 | P3.2/INT0 | bidirectional | Standard I/O port PORT3[2] that also serves as external interrupt 0, triggered by a falling edge or low level, and can wake the MCU from power-down mode. |
| 7 | P3.3/INT1 | bidirectional | Standard I/O port PORT3[3] that also serves as external interrupt 1, triggered by a falling edge or low level, and can wake the MCU from power-down mode. |
| 8 | P3.4/T0/ECI | bidirectional | Standard I/O port PORT3[4] that also serves as the timer/counter 0 external input T0 and the PCA counter external pulse input ECI. |
| 9 | P3.5/T1/PCA1/PWM1 | bidirectional | Standard I/O port PORT3[5] that also serves as the timer/counter 1 external input T1, PCA1 output and PWM1 output. |
| 10 | GND | power_in | Power supply negative terminal, connected to ground. |
| 11 | P3.7/PCA0/PWM0 | bidirectional | Standard I/O port PORT3[7] that also serves as the PCA0 programmable array output and PWM0 output. |
| 12 | P1.0/ADC0/CLKOUT0 | bidirectional | Standard I/O port PORT1[0] that also serves as ADC input channel 0 and, when T0CLKO is set in WAKE_CLKO, the timer 0 clock output CLKOUT0. |
| 13 | P1.1/ADC1/CLKOUT1 | bidirectional | Standard I/O port PORT1[1] that also serves as ADC input channel 1 and, when T1CLKO is set in WAKE_CLKO, the timer 1 clock output CLKOUT1. |
| 14 | P1.2/ADC2 | bidirectional | Standard I/O port PORT1[2] that also serves as ADC input channel 2; when used as an ADC input it should first be set to open-drain or high-impedance input mode. |
| 15 | P1.3/ADC3 | bidirectional | Standard I/O port PORT1[3] that also serves as ADC input channel 3; when used as an ADC input it should first be set to open-drain or high-impedance input mode. |
| 16 | P1.4/ADC4/SS | bidirectional | Standard I/O port PORT1[4] that also serves as ADC input channel 4 and the SPI slave select signal SS. |
| 17 | P1.5/ADC5/MOSI | bidirectional | Standard I/O port PORT1[5] that also serves as ADC input channel 5 and the SPI master-out slave-in signal MOSI. |
| 18 | P1.6/ADC6/MISO | bidirectional | Standard I/O port PORT1[6] that also serves as ADC input channel 6 and the SPI master-in slave-out signal MISO. |
| 19 | P1.7/ADC7/SCLK | bidirectional | Standard I/O port PORT1[7] that also serves as ADC input channel 7 and the SPI serial clock signal SCLK. |
| 20 | VCC | power_in | Positive power supply pin; the datasheet's part-number voltage code C is given as 5.5V~3.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | SOIC-20-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 3.5 | 5 | 5.5 | V | 434 | |
| Input Low Voltage (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 434 | ||
| Input Low Voltage (RESET, XTAL1) | VIL2 | 1.5 | V | 5V | 434 | ||
| Input High Voltage (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 434 | ||
| Input High Voltage (RESET) | VIH2 | 3 | V | 5V | 434 | ||
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 150 | 230 | uA | 5V | 434 | |
| Logic 0 input current (P0,P1,P2,P3) | IIL | 18 | 50 | uA | Vpin=0V | 434 | |
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 270 | 600 | uA | Vpin=2.0V | 434 | |
| Operating Current | ICC | 4 | 20 | mA | 5V | 434 | |
| Power Down Current | IPD | 0.1 | uA | 5V | 434 | ||
| Operating frequency range | 0 | 35 | MHz | 8 | |||
| DC power supply (5V) VDD - VSS | VDD - VSS | -0.3 | 6 | V | 434 | ||
| Voltage on any pin | -0.5 | 5.5 | V | 434 | |||
| Storage temperature | TST | -55 | 125 | ℃ | 434 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 434 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 165 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STC12C5608AD-35I-SOP20 - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil, generated on the KiCad land (body 7.5 x 12.7 mm, terminals on the pads, 2.515 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stc12c5608ad-35i-sop20-etched.step/stc12c5608ad-35i-sop20-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc12c5608ad-35i-sop20.step/stc12c5608ad-35i-sop20.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (449 pp, sha256
05a166d7771d925a, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# STC12C5608AD-35I-SOP20
**STC Micro** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-20-300mil
STC12C5608AD-35I-SOP20 from STC Micro, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | input | Reset input: holding RST high for at least 24 clock cycles plus 10 us resets the MCU, and after RST is pulled low the MCU starts executing from address 0000H. |
| 2 | P3.0/RxD | bidirectional | Standard I/O port PORT3[0] that also serves as the serial port RxD receive input, and P3.0 falling edge can set RI and wake the MCU from power-down mode when enabled. |
| 3 | P3.1/TxD | bidirectional | Standard I/O port PORT3[1] that also serves as the serial port TxD transmit output. |
| 4 | XTAL2 | output | Output of the internal clock circuit inverting amplifier for the external crystal; it may be left floating when an external clock is driven into XTAL1. |
| 5 | XTAL1 | input | Input to the internal clock circuit inverting amplifier for one side of the external crystal, and the clock input when an external clock source is used. |
| 6 | P3.2/INT0 | bidirectional | Standard I/O port PORT3[2] that also serves as external interrupt 0, triggered by a falling edge or low level, and can wake the MCU from power-down mode. |
| 7 | P3.3/INT1 | bidirectional | Standard I/O port PORT3[3] that also serves as external interrupt 1, triggered by a falling edge or low level, and can wake the MCU from power-down mode. |
| 8 | P3.4/T0/ECI | bidirectional | Standard I/O port PORT3[4] that also serves as the timer/counter 0 external input T0 and the PCA counter external pulse input ECI. |
| 9 | P3.5/T1/PCA1/PWM1 | bidirectional | Standard I/O port PORT3[5] that also serves as the timer/counter 1 external input T1, PCA1 output and PWM1 output. |
| 10 | GND | power_in | Power supply negative terminal, connected to ground. |
| 11 | P3.7/PCA0/PWM0 | bidirectional | Standard I/O port PORT3[7] that also serves as the PCA0 programmable array output and PWM0 output. |
| 12 | P1.0/ADC0/CLKOUT0 | bidirectional | Standard I/O port PORT1[0] that also serves as ADC input channel 0 and, when T0CLKO is set in WAKE_CLKO, the timer 0 clock output CLKOUT0. |
| 13 | P1.1/ADC1/CLKOUT1 | bidirectional | Standard I/O port PORT1[1] that also serves as ADC input channel 1 and, when T1CLKO is set in WAKE_CLKO, the timer 1 clock output CLKOUT1. |
| 14 | P1.2/ADC2 | bidirectional | Standard I/O port PORT1[2] that also serves as ADC input channel 2; when used as an ADC input it should first be set to open-drain or high-impedance input mode. |
| 15 | P1.3/ADC3 | bidirectional | Standard I/O port PORT1[3] that also serves as ADC input channel 3; when used as an ADC input it should first be set to open-drain or high-impedance input mode. |
| 16 | P1.4/ADC4/SS | bidirectional | Standard I/O port PORT1[4] that also serves as ADC input channel 4 and the SPI slave select signal SS. |
| 17 | P1.5/ADC5/MOSI | bidirectional | Standard I/O port PORT1[5] that also serves as ADC input channel 5 and the SPI master-out slave-in signal MOSI. |
| 18 | P1.6/ADC6/MISO | bidirectional | Standard I/O port PORT1[6] that also serves as ADC input channel 6 and the SPI master-in slave-out signal MISO. |
| 19 | P1.7/ADC7/SCLK | bidirectional | Standard I/O port PORT1[7] that also serves as ADC input channel 7 and the SPI serial clock signal SCLK. |
| 20 | VCC | power_in | Positive power supply pin; the datasheet's part-number voltage code C is given as 5.5V~3.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | SOIC-20-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 3.5 | 5 | 5.5 | V | | 434 |
| Input Low Voltage (P0,P1,P2,P3) | VIL1 | | | 0.8 | V | 5V | 434 |
| Input Low Voltage (RESET, XTAL1) | VIL2 | | | 1.5 | V | 5V | 434 |
| Input High Voltage (P0,P1,P2,P3) | VIH1 | 2 | | | V | 5V | 434 |
| Input High Voltage (RESET) | VIH2 | 3 | | | V | 5V | 434 |
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 150 | 230 | | uA | 5V | 434 |
| Logic 0 input current (P0,P1,P2,P3) | IIL | | 18 | 50 | uA | Vpin=0V | 434 |
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | | 270 | 600 | uA | Vpin=2.0V | 434 |
| Operating Current | ICC | | 4 | 20 | mA | 5V | 434 |
| Power Down Current | IPD | | | 0.1 | uA | 5V | 434 |
| Operating frequency range | | 0 | | 35 | MHz | | 8 |
| DC power supply (5V) VDD - VSS | VDD - VSS | -0.3 | | 6 | V | | 434 |
| Voltage on any pin | | -0.5 | | 5.5 | V | | 434 |
| Storage temperature | TST | -55 | | 125 | ℃ | | 434 |
| Operating temperature (I) | TA | -40 | | 85 | ℃ | | 434 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 165 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `STC12C5608AD-35I-SOP20`
- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`
- 3D model: SOIC-20-300mil, generated on the KiCad land (body 7.5 x 12.7 mm, terminals on the pads, 2.515 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `stc12c5608ad-35i-sop20-etched.step` / `stc12c5608ad-35i-sop20-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stc12c5608ad-35i-sop20.step` / `stc12c5608ad-35i-sop20.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STC Micro datasheet](docs/stc12c5608ad-35i-sop20-datasheet.pdf) (449 pp, sha256 `05a166d7771d925a`, retrieved 2026-11-13, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/stc12c5608ad-35i-sop20-datasheet.pdf)