Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STC12C5608AD-35I-SOP20

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-20-300mil

STC12C5608AD-35I-SOP20 from STC Micro, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RST input Reset input: holding RST high for at least 24 clock cycles plus 10 us resets the MCU, and after RST is pulled low the MCU starts executing from address 0000H.
2 P3.0/RxD bidirectional Standard I/O port PORT3[0] that also serves as the serial port RxD receive input, and P3.0 falling edge can set RI and wake the MCU from power-down mode when enabled.
3 P3.1/TxD bidirectional Standard I/O port PORT3[1] that also serves as the serial port TxD transmit output.
4 XTAL2 output Output of the internal clock circuit inverting amplifier for the external crystal; it may be left floating when an external clock is driven into XTAL1.
5 XTAL1 input Input to the internal clock circuit inverting amplifier for one side of the external crystal, and the clock input when an external clock source is used.
6 P3.2/INT0 bidirectional Standard I/O port PORT3[2] that also serves as external interrupt 0, triggered by a falling edge or low level, and can wake the MCU from power-down mode.
7 P3.3/INT1 bidirectional Standard I/O port PORT3[3] that also serves as external interrupt 1, triggered by a falling edge or low level, and can wake the MCU from power-down mode.
8 P3.4/T0/ECI bidirectional Standard I/O port PORT3[4] that also serves as the timer/counter 0 external input T0 and the PCA counter external pulse input ECI.
9 P3.5/T1/PCA1/PWM1 bidirectional Standard I/O port PORT3[5] that also serves as the timer/counter 1 external input T1, PCA1 output and PWM1 output.
10 GND power_in Power supply negative terminal, connected to ground.
11 P3.7/PCA0/PWM0 bidirectional Standard I/O port PORT3[7] that also serves as the PCA0 programmable array output and PWM0 output.
12 P1.0/ADC0/CLKOUT0 bidirectional Standard I/O port PORT1[0] that also serves as ADC input channel 0 and, when T0CLKO is set in WAKE_CLKO, the timer 0 clock output CLKOUT0.
13 P1.1/ADC1/CLKOUT1 bidirectional Standard I/O port PORT1[1] that also serves as ADC input channel 1 and, when T1CLKO is set in WAKE_CLKO, the timer 1 clock output CLKOUT1.
14 P1.2/ADC2 bidirectional Standard I/O port PORT1[2] that also serves as ADC input channel 2; when used as an ADC input it should first be set to open-drain or high-impedance input mode.
15 P1.3/ADC3 bidirectional Standard I/O port PORT1[3] that also serves as ADC input channel 3; when used as an ADC input it should first be set to open-drain or high-impedance input mode.
16 P1.4/ADC4/SS bidirectional Standard I/O port PORT1[4] that also serves as ADC input channel 4 and the SPI slave select signal SS.
17 P1.5/ADC5/MOSI bidirectional Standard I/O port PORT1[5] that also serves as ADC input channel 5 and the SPI master-out slave-in signal MOSI.
18 P1.6/ADC6/MISO bidirectional Standard I/O port PORT1[6] that also serves as ADC input channel 6 and the SPI master-in slave-out signal MISO.
19 P1.7/ADC7/SCLK bidirectional Standard I/O port PORT1[7] that also serves as ADC input channel 7 and the SPI serial clock signal SCLK.
20 VCC power_in Positive power supply pin; the datasheet's part-number voltage code C is given as 5.5V~3.5V.

Key specifications

Parameter Value
Manufacturer STC Micro
Package SOIC-20-300mil
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage VDD 3.5 5 5.5 V 434
Input Low Voltage (P0,P1,P2,P3) VIL1 0.8 V 5V 434
Input Low Voltage (RESET, XTAL1) VIL2 1.5 V 5V 434
Input High Voltage (P0,P1,P2,P3) VIH1 2 V 5V 434
Input High Voltage (RESET) VIH2 3 V 5V 434
Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) IOH1 150 230 uA 5V 434
Logic 0 input current (P0,P1,P2,P3) IIL 18 50 uA Vpin=0V 434
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 270 600 uA Vpin=2.0V 434
Operating Current ICC 4 20 mA 5V 434
Power Down Current IPD 0.1 uA 5V 434
Operating frequency range 0 35 MHz 8
DC power supply (5V) VDD - VSS VDD - VSS -0.3 6 V 434
Voltage on any pin -0.5 5.5 V 434
Storage temperature TST -55 125 ℃ 434
Operating temperature (I) TA -40 85 ℃ 434

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the 165

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: STC12C5608AD-35I-SOP20
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil, generated on the KiCad land (body 7.5 x 12.7 mm, terminals on the pads, 2.515 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stc12c5608ad-35i-sop20-etched.step / stc12c5608ad-35i-sop20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc12c5608ad-35i-sop20.step / stc12c5608ad-35i-sop20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (449 pp, sha256 05a166d7771d925a, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF