main
Ray Publish 0.1.0 f711ca0

STC11F04E-35I-TSSOP20

STC Micro · Microcontrollers (MCU/MPU/SOC) · TSSOP-20

STC11F04E-35I-TSSOP20 from STC Micro, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P3.6/RST bidirectional Port 3.6 I/O that can be selected as the reset pin (RST) during ISP programming; if set as P3.6 an external clock must be used.
2 P3.0/RxD/INT bidirectional Port 3.0 I/O, UART receive (RxD) and external interrupt/power-down wake-up pin.
3 P3.1/TxD bidirectional Port 3.1 I/O and UART transmit (TxD).
4 XTAL2 passive Output of the internal clock inverting amplifier, connected to the other crystal pin; may float when an external clock source drives XTAL1.
5 XTAL1 input Input of the internal clock inverting amplifier, connected to a crystal pin or used as external clock source input.
6 INT0/P3.2 bidirectional Port 3.2 I/O and external interrupt 0 (falling edge or low level).
7 INT1/P3.3 bidirectional Port 3.3 I/O and external interrupt 1 (falling edge or low level).
8 CLKOUT0/INT/T0/P3.4 bidirectional Port 3.4 I/O, Timer0 external input, Timer0 falling-edge interrupt and Timer0 clock output CLKOUT0.
9 CLKOUT1/INT/T1/P3.5 bidirectional Port 3.5 I/O, Timer1 external input, Timer1 falling-edge interrupt and Timer1 clock output CLKOUT1.
10 Gnd power_in Ground.
11 P3.7 bidirectional Port 3.7 standard I/O.
12 P1.0 bidirectional Port 1.0 I/O; CLKOUT2 baud-rate generator clock output is listed for P1.0 in the pin table.
13 P1.1 bidirectional Port 1.1 standard I/O.
14 P1.2 bidirectional Port 1.2 standard I/O.
15 P1.3 bidirectional Port 1.3 standard I/O.
16 P1.4 bidirectional Port 1.4 standard I/O.
17 P1.5 bidirectional Port 1.5 standard I/O.
18 P1.6/RxD/INT bidirectional Port 1.6 I/O, alternate UART receive (RxD) via AUXR1.7 and external interrupt/wake-up pin.
19 P1.7/TxD bidirectional Port 1.7 I/O and alternate UART transmit (TxD) via AUXR1.7.
20 VCC power_in Power supply; STC11Fxx 5V series operates 5.5V to 3.7V.

Key specifications

Parameter Value
Manufacturer STC Micro
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC power supply (5V) VDD - VSS -0.3 5.5 V 486
Storage temperature TST -55 125 ℃ 486
Operating temperature (I) TA -40 85 ℃ 486
Voltage on any pin -0.3 V 486
Operating Voltage VDD 4.1 5 5.5 V 486
Operating Current ICC 4 20 mA 5V 486
Input Low (P0,P1,P2,P3) VIL1 0.8 V 5V 486
Input High (P0,P1,P2,P3) VIH1 2 V 5V 486
Input High (RESET) VIH2 2.2 V 5V 486
Sourcing Current for output high (Quasi-output) IOH1 150 230 uA 5V 486
Logic 0 input current (P0,P1,P2,P3) IIL 50 uA Vpin=0V 486
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 100 270 600 uA Vpin=2.0V 486
Power Down Current IPD 0.1 uA 5V 486

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the 189

CAD (KiCad official)

  • Symbol: STC11F04E-35I-TSSOP20
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: stc11f04e-35i-tssop20-etched.step / stc11f04e-35i-tssop20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc11f04e-35i-tssop20.step / stc11f04e-35i-tssop20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (562 pp, sha256 b0b56b85d4e815c4, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF