3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSTC11F04E-35I-TSSOP20
STC Micro · Microcontrollers (MCU/MPU/SOC) · TSSOP-20
STC11F04E-35I-TSSOP20 from STC Micro, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P3.6/RST | bidirectional | Port 3.6 I/O that can be selected as the reset pin (RST) during ISP programming; if set as P3.6 an external clock must be used. |
| 2 | P3.0/RxD/INT | bidirectional | Port 3.0 I/O, UART receive (RxD) and external interrupt/power-down wake-up pin. |
| 3 | P3.1/TxD | bidirectional | Port 3.1 I/O and UART transmit (TxD). |
| 4 | XTAL2 | passive | Output of the internal clock inverting amplifier, connected to the other crystal pin; may float when an external clock source drives XTAL1. |
| 5 | XTAL1 | input | Input of the internal clock inverting amplifier, connected to a crystal pin or used as external clock source input. |
| 6 | INT0/P3.2 | bidirectional | Port 3.2 I/O and external interrupt 0 (falling edge or low level). |
| 7 | INT1/P3.3 | bidirectional | Port 3.3 I/O and external interrupt 1 (falling edge or low level). |
| 8 | CLKOUT0/INT/T0/P3.4 | bidirectional | Port 3.4 I/O, Timer0 external input, Timer0 falling-edge interrupt and Timer0 clock output CLKOUT0. |
| 9 | CLKOUT1/INT/T1/P3.5 | bidirectional | Port 3.5 I/O, Timer1 external input, Timer1 falling-edge interrupt and Timer1 clock output CLKOUT1. |
| 10 | Gnd | power_in | Ground. |
| 11 | P3.7 | bidirectional | Port 3.7 standard I/O. |
| 12 | P1.0 | bidirectional | Port 1.0 I/O; CLKOUT2 baud-rate generator clock output is listed for P1.0 in the pin table. |
| 13 | P1.1 | bidirectional | Port 1.1 standard I/O. |
| 14 | P1.2 | bidirectional | Port 1.2 standard I/O. |
| 15 | P1.3 | bidirectional | Port 1.3 standard I/O. |
| 16 | P1.4 | bidirectional | Port 1.4 standard I/O. |
| 17 | P1.5 | bidirectional | Port 1.5 standard I/O. |
| 18 | P1.6/RxD/INT | bidirectional | Port 1.6 I/O, alternate UART receive (RxD) via AUXR1.7 and external interrupt/wake-up pin. |
| 19 | P1.7/TxD | bidirectional | Port 1.7 I/O and alternate UART transmit (TxD) via AUXR1.7. |
| 20 | VCC | power_in | Power supply; STC11Fxx 5V series operates 5.5V to 3.7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC power supply (5V) | VDD - VSS | -0.3 | 5.5 | V | 486 | ||
| Storage temperature | TST | -55 | 125 | ℃ | 486 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 486 | ||
| Voltage on any pin | -0.3 | V | 486 | ||||
| Operating Voltage | VDD | 4.1 | 5 | 5.5 | V | 486 | |
| Operating Current | ICC | 4 | 20 | mA | 5V | 486 | |
| Input Low (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 486 | ||
| Input High (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 486 | ||
| Input High (RESET) | VIH2 | 2.2 | V | 5V | 486 | ||
| Sourcing Current for output high (Quasi-output) | IOH1 | 150 | 230 | uA | 5V | 486 | |
| Logic 0 input current (P0,P1,P2,P3) | IIL | 50 | uA | Vpin=0V | 486 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | Vpin=2.0V | 486 |
| Power Down Current | IPD | 0.1 | uA | 5V | 486 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 189 |
CAD (KiCad official)
- Symbol:
STC11F04E-35I-TSSOP20 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
stc11f04e-35i-tssop20-etched.step/stc11f04e-35i-tssop20-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc11f04e-35i-tssop20.step/stc11f04e-35i-tssop20.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (562 pp, sha256
b0b56b85d4e815c4, retrieved 2026-11-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).