Generated by kicad-footprint-generator · KiCad file format 20260206
STC11F04E-35I-SOP16
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-16
STC11F04E-35I-SOP16 from STC Micro, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P3.6/RST | bidirectional | Standard I/O port P3.6, or reset input selected during ISP programming; if used as I/O an external clock must be used. |
| 2 | P3.0/RxD/INT | bidirectional | Standard I/O port P3.0 and UART receive data, with falling-edge interrupt able to wake the MCU from power-down. |
| 3 | P3.1/TxD | bidirectional | Standard I/O port P3.1 and UART transmit data. |
| 4 | XTAL2 | output | Output of the inverting amplifier of the internal clock circuit, connected to the other crystal pin; may float when an external clock drives XTAL1. |
| 5 | XTAL1 | input | Input of the inverting amplifier of the internal clock circuit, connected to a crystal pin or used as external clock input. |
| 6 | P3.3/INT1 | bidirectional | Standard I/O port P3.3 and external interrupt 1, falling-edge or low-level triggered. |
| 7 | P3.4/T0/INT/CLKOUT0 | bidirectional | Standard I/O port P3.4, timer/counter 0 external input, timer 0 falling-edge interrupt, and timer 0 clock output CLKOUT0. |
| 8 | Gnd | power_in | Ground. |
| 9 | P3.7 | bidirectional | Standard I/O port P3.7. |
| 10 | P1.0/CLKOUT2 | bidirectional | Standard I/O port P1.0 and CLKOUT2 baud-rate generator clock output when enabled by BRTCLKO. |
| 11 | P1.1 | bidirectional | Standard I/O port P1.1. |
| 12 | P1.2 | bidirectional | Standard I/O port P1.2. |
| 13 | P1.5 | bidirectional | Standard I/O port P1.5. |
| 14 | P1.6/RxD/INT | bidirectional | Standard I/O port P1.6 and alternate UART receive data, with falling-edge interrupt. |
| 15 | P1.7/TxD | bidirectional | Standard I/O port P1.7 and alternate UART transmit data. |
| 16 | VCC | power_in | Power supply, 5.5-4.1V/3.5V range for STC11F series. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | SOIC-16 |
| Category | Embedded Processors & Controllers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC power supply (5V), VDD - VSS | VDD - VSS | -0.3 | 5.5 | V | 5V MCU | 373 | |
| Operating temperature (I) | TA | -40 | 85 | °C | Industrial grade (I) | 373 | |
| Storage temperature | TST | -55 | 125 | °C | 373 | ||
| Operating Voltage | VDD | 4.1 | 5 | 5.5 | V | 5V MCU | 373 |
| Input Low (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 373 | ||
| Input High (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 373 | ||
| Input High (RESET) | VIH2 | 2.2 | V | 5V | 373 | ||
| Operating Current | ICC | 4 | 20 | mA | 5V | 373 | |
| Power Down Current | IPD | 0.1 | uA | 5V; printed as '< 0.1' in the Typ column | 373 | ||
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 150 | 230 | uA | 5V | 373 | |
| Logic 0 input current (P0,P1,P2,P3) | IIL | 50 | uA | Vpin=0V | 373 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | Vpin=2.0V | 373 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 179 |
CAD (KiCad official)
- Symbol:
STC11F04E-35I-SOP16 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
stc11f04e-35i-sop16-etched.step/stc11f04e-35i-sop16-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc11f04e-35i-sop16.step/stc11f04e-35i-sop16.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (411 pp, sha256
3dfcbd33014f8d3b, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).