Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STC11F04E-35I-SOP16

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-16

STC11F04E-35I-SOP16 from STC Micro, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P3.6/RST bidirectional Standard I/O port P3.6, or reset input selected during ISP programming; if used as I/O an external clock must be used.
2 P3.0/RxD/INT bidirectional Standard I/O port P3.0 and UART receive data, with falling-edge interrupt able to wake the MCU from power-down.
3 P3.1/TxD bidirectional Standard I/O port P3.1 and UART transmit data.
4 XTAL2 output Output of the inverting amplifier of the internal clock circuit, connected to the other crystal pin; may float when an external clock drives XTAL1.
5 XTAL1 input Input of the inverting amplifier of the internal clock circuit, connected to a crystal pin or used as external clock input.
6 P3.3/INT1 bidirectional Standard I/O port P3.3 and external interrupt 1, falling-edge or low-level triggered.
7 P3.4/T0/INT/CLKOUT0 bidirectional Standard I/O port P3.4, timer/counter 0 external input, timer 0 falling-edge interrupt, and timer 0 clock output CLKOUT0.
8 Gnd power_in Ground.
9 P3.7 bidirectional Standard I/O port P3.7.
10 P1.0/CLKOUT2 bidirectional Standard I/O port P1.0 and CLKOUT2 baud-rate generator clock output when enabled by BRTCLKO.
11 P1.1 bidirectional Standard I/O port P1.1.
12 P1.2 bidirectional Standard I/O port P1.2.
13 P1.5 bidirectional Standard I/O port P1.5.
14 P1.6/RxD/INT bidirectional Standard I/O port P1.6 and alternate UART receive data, with falling-edge interrupt.
15 P1.7/TxD bidirectional Standard I/O port P1.7 and alternate UART transmit data.
16 VCC power_in Power supply, 5.5-4.1V/3.5V range for STC11F series.

Key specifications

Parameter Value
Manufacturer STC Micro
Package SOIC-16
Category Embedded Processors & Controllers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC power supply (5V), VDD - VSS VDD - VSS -0.3 5.5 V 5V MCU 373
Operating temperature (I) TA -40 85 °C Industrial grade (I) 373
Storage temperature TST -55 125 °C 373
Operating Voltage VDD 4.1 5 5.5 V 5V MCU 373
Input Low (P0,P1,P2,P3) VIL1 0.8 V 5V 373
Input High (P0,P1,P2,P3) VIH1 2 V 5V 373
Input High (RESET) VIH2 2.2 V 5V 373
Operating Current ICC 4 20 mA 5V 373
Power Down Current IPD 0.1 uA 5V; printed as '< 0.1' in the Typ column 373
Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) IOH1 150 230 uA 5V 373
Logic 0 input current (P0,P1,P2,P3) IIL 50 uA Vpin=0V 373
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 100 270 600 uA Vpin=2.0V 373

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the 179

CAD (KiCad official)

  • Symbol: STC11F04E-35I-SOP16
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: stc11f04e-35i-sop16-etched.step / stc11f04e-35i-sop16-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc11f04e-35i-sop16.step / stc11f04e-35i-sop16.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (411 pp, sha256 3dfcbd33014f8d3b, retrieved 2026-10-28, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF