main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stc10f08xe-35i-pdip40: footprint re-picked to DIP-40_W15.24mm from the maker drawing · Ray
viewers stc10f08xe-35i-pdip40: symbol viewer · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md stc10f08xe-35i-pdip40: README CAD lines name the land and model on the page (Package_DIP:DIP-40_W15.24mm) · Ray
stc10f08xe-35i-pdip40-etched.glb stc10f08xe-35i-pdip40: footprint re-picked to DIP-40_W15.24mm from the maker drawing · Ray
stc10f08xe-35i-pdip40-etched.step stc10f08xe-35i-pdip40: footprint re-picked to DIP-40_W15.24mm from the maker drawing · Ray
stc10f08xe-35i-pdip40-hero.glb stc10f08xe-35i-pdip40: footprint re-picked to DIP-40_W15.24mm from the maker drawing · Ray
stc10f08xe-35i-pdip40-hero.overlay.json stc10f08xe-35i-pdip40: footprint re-picked to DIP-40_W15.24mm from the maker drawing · Ray
stc10f08xe-35i-pdip40.glb stc10f08xe-35i-pdip40: footprint re-picked to DIP-40_W15.24mm from the maker drawing · Ray
stc10f08xe-35i-pdip40.kicad_mod stc10f08xe-35i-pdip40: footprint re-picked to DIP-40_W15.24mm from the maker drawing · Ray
stc10f08xe-35i-pdip40.kicad_sym stc10f08xe-35i-pdip40: symbol repaired (body fitted to the names) · Ray
stc10f08xe-35i-pdip40.lbr stc10f08xe-35i-pdip40: footprint re-picked to DIP-40_W15.24mm from the maker drawing · Ray
stc10f08xe-35i-pdip40.step stc10f08xe-35i-pdip40: footprint re-picked to DIP-40_W15.24mm from the maker drawing · Ray

STC10F08XE-35I-PDIP40

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · DIP-40

STC10F08XE-35I-PDIP40 from STC Micro, in a DIP-40. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.0/CLKOUT2 bidirectional Standard I/O port 1 bit 0, which can be configured as the CLKOUT2 clock output of the independent baud-rate generator via WAKE_CLKO/BRTCLKO.
2 P1.1 bidirectional Standard I/O port 1 bit 1.
3 P1.2 bidirectional Standard I/O port 1 bit 2.
4 P1.3 bidirectional Standard I/O port 1 bit 3.
5 P1.4 bidirectional Standard I/O port 1 bit 4.
6 P1.5 bidirectional Standard I/O port 1 bit 5.
7 P1.6/RxD bidirectional Standard I/O port 1 bit 6 or alternate UART receive data input, selectable with AUXR1.UART_P1.
8 P1.7/TxD bidirectional Standard I/O port 1 bit 7 or alternate UART transmit data output, selectable with AUXR1.UART_P1.
9 P4.7/RST bidirectional Reset input (factory default is RST), which can be set to I/O port P4.7 during ISP programming; if used as I/O an external clock is required.
10 P3.0/RxD bidirectional Standard I/O port 3 bit 0 or UART1 receive data input, which can also wake the MCU from power-down.
11 P3.1/TxD bidirectional Standard I/O port 3 bit 1 or UART1 transmit data output.
12 P3.2/INT0 bidirectional Standard I/O port 3 bit 2 or external interrupt 0 input, triggered on falling edge or low level, and able to wake the MCU from power-down.
13 P3.3/INT1 bidirectional Standard I/O port 3 bit 3 or external interrupt 1 input, triggered on falling edge or low level, and able to wake the MCU from power-down.
14 P3.4/T0/INT/CLKOUT0 bidirectional Standard I/O port 3 bit 4, timer/counter 0 external input with falling-edge interrupt, or CLKOUT0 timer 0 clock output enabled via WAKE_CLKO/T0CLKO.
15 P3.5/T1/INT/CLKOUT1 bidirectional Standard I/O port 3 bit 5, timer/counter 1 external input with falling-edge interrupt, or CLKOUT1 timer 1 clock output enabled via WAKE_CLKO/T1CLKO.
16 P3.6/WR bidirectional Standard I/O port 3 bit 6 or external data memory write pulse output.
17 P3.7/RD bidirectional Standard I/O port 3 bit 7 or external data memory read pulse output.
18 XTAL2 output Output of the internal clock inverting amplifier to the other crystal terminal; may be left floating when an external clock source drives XTAL1.
19 XTAL1 input Input of the internal clock inverting amplifier for one crystal terminal, or the external clock source input.
20 Gnd power_in Ground.
21 P2.0 bidirectional Port 2 bit 0, quasi-bidirectional I/O or address bus bit A8 for external memory.
22 P2.1 bidirectional Port 2 bit 1, quasi-bidirectional I/O or address bus bit A9 for external memory.
23 P2.2 bidirectional Port 2 bit 2, quasi-bidirectional I/O or address bus bit A10 for external memory.
24 P2.3 bidirectional Port 2 bit 3, quasi-bidirectional I/O or address bus bit A11 for external memory.
25 P2.4 bidirectional Port 2 bit 4, quasi-bidirectional I/O or address bus bit A12 for external memory.
26 P2.5 bidirectional Port 2 bit 5, quasi-bidirectional I/O or address bus bit A13 for external memory.
27 P2.6 bidirectional Port 2 bit 6, quasi-bidirectional I/O or address bus bit A14 for external memory.
28 P2.7 bidirectional Port 2 bit 7, quasi-bidirectional I/O or address bus bit A15 for external memory.
29 NA/P4.4 bidirectional After reset a weak pull-up with no function; setting P4SW.4=1 makes it I/O port P4.4.
30 ALE/P4.5 bidirectional ALE address-latch signal output only during MOVX external access after reset; setting P4SW.5=1 makes it I/O port P4.5.
31 NA/P4.6 bidirectional After reset a weak pull-up with no function; setting P4SW.6=1 makes it I/O port P4.6.
32 P0.7 bidirectional Port 0 bit 7, quasi-bidirectional I/O with internal weak pull-up, or data bus bit D7 / address bit A7 when used as the multiplexed bus.
33 P0.6 bidirectional Port 0 bit 6, quasi-bidirectional I/O with internal weak pull-up, or data bus bit D6 / address bit A6 when used as the multiplexed bus.
34 P0.5 bidirectional Port 0 bit 5, quasi-bidirectional I/O with internal weak pull-up, or data bus bit D5 / address bit A5 when used as the multiplexed bus.
35 P0.4 bidirectional Port 0 bit 4, quasi-bidirectional I/O with internal weak pull-up, or data bus bit D4 / address bit A4 when used as the multiplexed bus.
36 P0.3 bidirectional Port 0 bit 3, quasi-bidirectional I/O with internal weak pull-up, or data bus bit D3 / address bit A3 when used as the multiplexed bus.
37 P0.2 bidirectional Port 0 bit 2, quasi-bidirectional I/O with internal weak pull-up, or data bus bit D2 / address bit A2 when used as the multiplexed bus.
38 P0.1 bidirectional Port 0 bit 1, quasi-bidirectional I/O with internal weak pull-up, or data bus bit D1 / address bit A1 when used as the multiplexed bus.
39 P0.0 bidirectional Port 0 bit 0, quasi-bidirectional I/O with internal weak pull-up, or data bus bit D0 / address bit A0 when used as the multiplexed bus.
40 Vcc power_in Power supply, 5.5V to 3.8V/3.3V for the STC10Fxx series (3.8V or 3.3V being the selectable low-voltage reset threshold).

Key specifications

Parameter Value
Manufacturer STC Micro
Package DIP-40
Category Embedded Processors & Controllers
Pins 40

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC power supply (5V) VDD - VSS -0.3 5.5 V 471
Operating temperature (I) TA -40 85 ℃ 471
Storage temperature TST -55 125 ℃ 471
Operating Voltage VDD 4.1 5 5.5 V 471
Input Low (P0,P1,P2,P3) VIL1 0.8 V 5V 471
Input High (P0,P1,P2,P3) VIH1 2 V 5V 471
Input High (RESET) VIH2 2.2 V 5V 471
Operating Current ICC 4 20 mA 5V 471
Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) IOH1 150 230 uA 5V 471
Logic 0 input current (P0,P1,P2,P3) IIL 50 uA Vpin=0V 471
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 100 270 600 uA Vpin=2.0V 471
Voltage on any pin -0.3 V max printed as VCC + 0.3 471
Power Down Current IPD 0.1 uA 5V; printed as <0.1 471
Idle Current IIDL 3 mA 5V 471
Sink Current for output low (P0,P1,P2,P3) IOL1 20 mA 5V@Vpin=0.45V 471
Sourcing Current for output high (P0,P1,P2,P3) (Push-Pull, Strong-output) IOH2 20 mA 5V@Vpin=2.4V 471

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the 184

CAD (KiCad official)

  • Symbol: STC10F08XE-35I-PDIP40
  • Footprint: Package_DIP:DIP-40_W15.24mm
  • 3D model: DIP-40_W15.24mm (KiCad packages3D, STEP)
  • 3D model files: stc10f08xe-35i-pdip40-etched.step / stc10f08xe-35i-pdip40-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc10f08xe-35i-pdip40.step / stc10f08xe-35i-pdip40.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (520 pp, sha256 7eeb33614d62821a, retrieved 2026-10-29, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF