Generated by kicad-footprint-generator · KiCad file format 20260206
ST3241ECPR
STMicroelectronics · RS232 ICs · SSOP-28-208mil
ST3241ECPR from STMicroelectronics, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C2+ | passive | Positive terminal of the inverting charge pump capacitor (C2 = 0.1 µF minimum per Table 11 for 3.0 to 5.5 V operation, with 0.47 µF recommended for the 3.0 to 5.5 V row). |
| 2 | C2 | passive | Negative terminal of the inverting charge pump capacitor. |
| 3 | V- | power_out | Generated -5.5 V charge pump output; Table 3 limits |
| 4 | R1IN | input | First receiver input; operating range is ±25 V per Table 9. |
| 5 | R2IN | input | Second receiver input; operating range is ±25 V per Table 9. |
| 6 | R3IN | input | Third receiver input; operating range is ±25 V per Table 9. |
| 7 | R4IN | input | Fourth receiver input; operating range is ±25 V per Table 9. |
| 8 | R5IN | input | Fifth receiver input; operating range is ±25 V per Table 9. |
| 9 | T1OUT | output | First RS-232 transmitter output, swinging ±5 V minimum with a 3 kΩ load and rated for continuous short-circuit duration. |
| 10 | T2OUT | output | Second RS-232 transmitter output, swinging ±5 V minimum with a 3 kΩ load and rated for continuous short-circuit duration. |
| 11 | T3OUT | output | Third RS-232 transmitter output, swinging ±5 V minimum with a 3 kΩ load and rated for continuous short-circuit duration. |
| 12 | T3IN | input | Third transmitter logic input; logic input threshold low is 0.8 V maximum and threshold high is 2 V (VCC = 3.3 V) or 2.4 V (VCC = 5 V). |
| 13 | T2IN | input | Second transmitter logic input; logic input threshold low is 0.8 V maximum and threshold high is 2 V (VCC = 3.3 V) or 2.4 V (VCC = 5 V). |
| 14 | T1IN | input | First transmitter logic input; logic input threshold low is 0.8 V maximum and threshold high is 2 V (VCC = 3.3 V) or 2.4 V (VCC = 5 V). |
| 15 | R5OUT | output | Fifth receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA. |
| 16 | R4OUT | output | Fourth receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA. |
| 17 | R3OUT | output | Third receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA. |
| 18 | R2OUT | output | Second receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA. |
| 19 | R1OUT | output | First receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA. |
| 20 | R2OUTB | output | Non-inverting complementary receiver output of R2 that is always active to provide the serial port wake-up function. |
| 21 | R1OUTB | output | Non-inverting complementary receiver output of R1 that is always active to provide the serial port wake-up function. |
| 22 | SHDN | input | Shutdown control, active low; uses the same logic thresholds as the transmitter inputs (0.8 V low, 2 V or 2.4 V high). |
| 23 | EN | input | Receiver enable, active low; uses the same logic thresholds as the transmitter inputs (0.8 V low, 2 V or 2.4 V high). |
| 24 | C1- | passive | Negative terminal of the voltage doubler charge pump capacitor. |
| 25 | GND | power_in | Ground reference for the device. |
| 26 | VCC | power_in | Supply voltage, specified from 3 V to 5.5 V; absolute maximum is -0.3 V to 6 V. |
| 27 | V+ | power_out | Generated +5.5 V charge pump output; absolute maximum range is (VCC - 0.3) V to 7 V. |
| 28 | C1+ | passive | Positive terminal of the voltage doubler charge pump capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
ST3241ECPR - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
st3241ecpr-etched.step/st3241ecpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);st3241ecpr.step/st3241ecpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (14 pp, sha256
3aa1c70966b2daf6, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).