Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ST3241ECPR

STMicroelectronics · RS232 ICs · SSOP-28-208mil

ST3241ECPR from STMicroelectronics, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C2+ passive Positive terminal of the inverting charge pump capacitor (C2 = 0.1 µF minimum per Table 11 for 3.0 to 5.5 V operation, with 0.47 µF recommended for the 3.0 to 5.5 V row).
2 C2 passive Negative terminal of the inverting charge pump capacitor.
3 V- power_out Generated -5.5 V charge pump output; Table 3 limits
4 R1IN input First receiver input; operating range is ±25 V per Table 9.
5 R2IN input Second receiver input; operating range is ±25 V per Table 9.
6 R3IN input Third receiver input; operating range is ±25 V per Table 9.
7 R4IN input Fourth receiver input; operating range is ±25 V per Table 9.
8 R5IN input Fifth receiver input; operating range is ±25 V per Table 9.
9 T1OUT output First RS-232 transmitter output, swinging ±5 V minimum with a 3 kΩ load and rated for continuous short-circuit duration.
10 T2OUT output Second RS-232 transmitter output, swinging ±5 V minimum with a 3 kΩ load and rated for continuous short-circuit duration.
11 T3OUT output Third RS-232 transmitter output, swinging ±5 V minimum with a 3 kΩ load and rated for continuous short-circuit duration.
12 T3IN input Third transmitter logic input; logic input threshold low is 0.8 V maximum and threshold high is 2 V (VCC = 3.3 V) or 2.4 V (VCC = 5 V).
13 T2IN input Second transmitter logic input; logic input threshold low is 0.8 V maximum and threshold high is 2 V (VCC = 3.3 V) or 2.4 V (VCC = 5 V).
14 T1IN input First transmitter logic input; logic input threshold low is 0.8 V maximum and threshold high is 2 V (VCC = 3.3 V) or 2.4 V (VCC = 5 V).
15 R5OUT output Fifth receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA.
16 R4OUT output Fourth receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA.
17 R3OUT output Third receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA.
18 R2OUT output Second receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA.
19 R1OUT output First receiver logic output, with output voltage low of 0.4 V maximum at 1.6 mA.
20 R2OUTB output Non-inverting complementary receiver output of R2 that is always active to provide the serial port wake-up function.
21 R1OUTB output Non-inverting complementary receiver output of R1 that is always active to provide the serial port wake-up function.
22 SHDN input Shutdown control, active low; uses the same logic thresholds as the transmitter inputs (0.8 V low, 2 V or 2.4 V high).
23 EN input Receiver enable, active low; uses the same logic thresholds as the transmitter inputs (0.8 V low, 2 V or 2.4 V high).
24 C1- passive Negative terminal of the voltage doubler charge pump capacitor.
25 GND power_in Ground reference for the device.
26 VCC power_in Supply voltage, specified from 3 V to 5.5 V; absolute maximum is -0.3 V to 6 V.
27 V+ power_out Generated +5.5 V charge pump output; absolute maximum range is (VCC - 0.3) V to 7 V.
28 C1+ passive Positive terminal of the voltage doubler charge pump capacitor.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SSOP-28-208mil
Category Interface
Pins 28

CAD (KiCad official)

  • Symbol: ST3241ECPR
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: st3241ecpr-etched.step / st3241ecpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); st3241ecpr.step / st3241ecpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (14 pp, sha256 3aa1c70966b2daf6, retrieved 2026-10-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF