main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers st25r3911b-aqft: viewers · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md st25r3911b-aqft: the pins were read twice by one model (sonnet); say so instead of 'cross-checked by two models' · Ray
st25r3911b-aqft-etched.glb Publish 0.1.0 · Ray
st25r3911b-aqft-etched.step st25r3911b-aqft: factory component page (tier=mfr) · Ray
st25r3911b-aqft-hero.glb st25r3911b-aqft: hero GLB from the etched model (keeps the MPN mark) · Ray
st25r3911b-aqft-hero.overlay.json Publish 0.1.0 · Ray
st25r3911b-aqft.glb Publish 0.1.0 · Ray
st25r3911b-aqft.kicad_mod Publish 0.1.0 · Ray
st25r3911b-aqft.kicad_sym Publish 0.1.0 · Ray
st25r3911b-aqft.lbr Publish 0.1.0 · Ray
st25r3911b-aqft.step Publish 0.1.0 · Ray

ST25R3911B-AQFT

STMicroelectronics · RF Chips · QFN-32-EP(5x5)

ST25R3911B-AQFT from STMicroelectronics, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD_IO power_in Positive supply for peripheral communication; IO pins support 1.65 V to 5.5 V.
2 CSO output Capacitor sensor output (analog output).
3 VSP_D power_out Digital supply regulator output.
4 XTO output Xtal oscillator output for the 13.56 MHz or 27.12 MHz crystal.
5 XTI input Xtal oscillator input (analog input / digital input) for the 13.56 MHz or 27.12 MHz crystal.
6 VSN_D power_in Digital ground supply pad.
7 VSP_A power_out Analog supply regulator output.
8 VDD power_in External positive supply, 2.4 V to 5.5 V operating range (absolute maximum 6.0 V).
9 VSP_RF power_out Supply regulator output for antenna drivers.
10 RFO1 output Antenna driver output 1 (low impedance, 1 Ohm driver).
11 RFO2 output Antenna driver output 2 (low impedance, 1 Ohm driver).
12 VSN_RF power_in Ground of antenna drivers.
13 TRIM1_3 bidirectional Analog I/O to trim the antenna resonant circuit; HVNMOS switch to VSS (6.25 Ohm typ. on-resistance, 25 V breakdown).
14 TRIM2_3 bidirectional Analog I/O to trim the antenna resonant circuit; HVNMOS switch to VSS (6.25 Ohm typ. on-resistance, 25 V breakdown); left open when a single driver is used.
15 TRIM1_2 bidirectional Analog I/O to trim the antenna resonant circuit via a binary-weighted HVNMOS switch to VSS (25 V breakdown).
16 TRIM2_2 bidirectional Analog I/O to trim the antenna resonant circuit via a binary-weighted HVNMOS switch to VSS; left open when a single driver is used.
17 TRIM1_1 bidirectional Analog I/O to trim the antenna resonant circuit via a binary-weighted HVNMOS switch to VSS (25 V breakdown).
18 TRIM2_1 bidirectional Analog I/O to trim the antenna resonant circuit via a binary-weighted HVNMOS switch to VSS; left open when a single driver is used.
19 TRIM1_0 bidirectional Analog I/O to trim the antenna resonant circuit; LSB HVNMOS switch to VSS (50 Ohm typ. on-resistance at 3 V VSP_D, 25 V breakdown).
20 TRIM2_0 bidirectional Analog I/O to trim the antenna resonant circuit; LSB HVNMOS switch to VSS (50 Ohm typ. on-resistance at 3 V VSP_D); left open when a single driver is used.
21 VSS power_in Ground, die substrate potential.
22 RFI1 input Receiver input 1 (analog input).
23 RFI2 input Receiver input 2 (analog input).
24 AGD bidirectional Analog reference voltage (analog I/O).
25 CSI input Capacitor sensor input (analog input).
26 VSN_A power_in Analog ground supply pad.
27 IRQ output Interrupt request output; also outputs the PM demodulation chain in transparent mode.
28 MCU_CLK output Microcontroller clock output.
29 MISO tri_state Serial Peripheral Interface data output (digital output / tristate).
30 MOSI input Serial Peripheral Interface data input.
31 SCLK input Serial Peripheral Interface clock.
32 /SS input Serial Peripheral Interface enable, active low.
33 VSS power_in Exposed pad: ground, die substrate potential, connected to VSS on PCB.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package QFN-32-EP(5x5)
Category RF & Radio
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC supply voltage VDD -0.5 6 V 97
DC_IO supply voltage VDD_IO -0.5 6 V 97
Input pin voltage TRIM pins VINTRIM -0.5 25 V 97
Input pin voltage for peripheral communication pins VIN -0.5 6.5 V 97
Input voltage for analog pins VINA -0.5 6 V 97
Input current (latch-up immunity) Iscr -100 100 mA Norm: JEDEC 78 97
Drive capability of output driver Ioutmax 0 600 mA 97
Electrostatic discharge ESD -2 2 kV JS-001-2014 (Human body model) 97
Electrostatic discharge TRIMx_x pins ESD -500 500 V JS-001-2014 (Human body model), valid for TRIMx_x pins (pins 13 - 20) 97
Storage temperature Tstrg -55 125 °C 97
Package body temperature Tbody 260 °C IPC/JEDEC J-STD-020 97
Relative humidity non-condensing RHNC 5 85 % 97
Positive supply voltage VDD 2.4 5.5 V 98
Peripheral communication supply voltage VDD_IO 1.65 5.5 V 98
Negative supply voltage VSS 0 0 V 98
Input pin voltage TRIM pins VINTRIM 20 V 98
Junction temperature TJUN -40 125 °C 98
RFI input amplitude VRFI_A 0.15 3 Vpp Minimum is for NFC receive mode; recommended 2.5 Vpp in HF reader mode and NFC transmit mode 98
RFO driver current RFO 0 500 mA 98
Input leakage current ILEAK -1 1 µA CMOS inputs \SS, MOSI, SCLK 98
Capacitive load CL 0 50 pF CMOS outputs MISO, IRQ, MCU_CLK; io_18=0 99
Output resistance RO 0 250 550 Ω CMOS outputs MISO, IRQ, MCU_CLK; io_18=0 99
Pull-down resistance pin MISO RPD 5 10 15 kΩ Pull-down can be enabled while MISO output is in tristate 99
Supply current in Power-down mode IPD 0.7 2 µA VDD=3.3 V, 25 °C; register 00h=0Fh, 01h=80h, 02h=00h, 03h=08h 99
Supply current in initial NFC Target mode INFCT 3.5 7 µA VDD=3.3 V, 25 °C; register 03h=80h (enable NFC Target mode) 99
Supply current in Wake-up mode IWU 3.6 8 µA VDD=3.3 V, 25 °C; register 02h=04h, 31h=08h (100 ms timeout) 99
Supply current in Ready mode IRD 5.4 7.5 mA VDD=3.3 V, 25 °C; register 01h=C0h, 02h=80h, 03h=08h, VSP_A and VSP_D shorted 99
Supply current, all active IAL 8.7 12.5 mA VDD=3.3 V, 25 °C; register 02h=E8h, 27h=FFh, VSP_A and VSP_D shorted 99
Supply current, all active, low power receiver mode ILP 6.8 10 mA VDD=3.3 V, 25 °C; register 0Bh=80h (low power mode), 02h=E8h, 27h=FFh 99
RFO1 and RFO2 driver output resistance RRFO 0.25 0.6 1.8 Ω IRFO = 10 mA 99
Load impedance across RFO1 and RFO2 Zload 8 10 50 Ω Lower than minimum value can cause permanent damage 100
RFI input sensitivity VRFI 0.5 mVrms fSUB = 848 kHz, AM channel with peak detector input stage selected 100
RFI input resistance RRFI 5 10 15 kΩ 100
Power on Reset voltage VPOR 1.31 1.5 1.75 V 100
AGD voltage VAGD 1.4 1.5 1.6 V register 01h=C0h, 02h=80h, 03h=08h, VSP_A and VSP_D shorted 100
Regulated voltage VREG 2.8 3 3.32 V Manual regulator mode, set to 3.0 V, measured on pin VSP_RF; register 02h=E8h, 2Ah=D8h 100
Oscillator start-up time TOSC 0.65 0.7 10 ms 13.56 MHz or 27.12 MHz crystal, ESRMAX= 150 Ω max 100

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC The reflow peak soldering temperature (body temperature) is specified according to IPC/JEDEC J-STD-020 “Moisture/Reflow 97
contacts copper capacitance between two copper patches connected to the CSI and CSO pins. The capacitance changes with 3

CAD (KiCad official)

  • Symbol: ST25R3911B-AQFT
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: st25r3911b-aqft-etched.step / st25r3911b-aqft-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); st25r3911b-aqft.step / st25r3911b-aqft.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (116 pp, sha256 722073ea1b9b98cd, retrieved 2026-10-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF