main
Ray
st1s40idr: specified limits as data (metadata.characteristics, 32 rows from the datasheet)
765e289
ST1S40IDR
STMicroelectronics · DC-DC Converters · SOIC-8
ST1S40IDR from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Regulator output switching pin connecting to the external inductor, switching between ground and VIN at 850 kHz switching frequency. |
| 2 | PGND | power_in | Power ground return path for low-side MOSFET driver and output stage circuits. |
| 3 | VINA | power_in | Unregulated DC input voltage with operating range from 4.0 V to 18 V. |
| 4 | EN | input | Enable control input; device turns ON when EN > 1.2 V and turns OFF when EN < 0.4 V, with internal pull-down to disable when floating. |
| 5 | FB | input | Feedback input for output voltage regulation at 0.8 V nominal; external resistor divider required for higher output voltages. |
| 6 | AGND | power_in | Analog ground reference for feedback circuit and error amplifier. |
| 7 | GND | power_in | Ground connection for improved current distribution. |
| 8 | VINSW | power_in | Power input voltage directly connected to high-side MOSFET; bypass capacitor required to minimize input voltage spikes. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage range | VIN | 4 | 18 | V | 5 | ||
| Switching frequency | FSW | 0.7 | 0.85 | 1 | MHz | 5 | |
| Maximum limiting current | ILIM | 4 | 6 | A | (2) Guaranteed by design | 5 | |
| Maximum duty cycle | DMAX | 100 | % | (2) Guaranteed by design | 5 | ||
| Feedback voltage | VFB | 0.784 | 0.8 | 0.816 | V | 5 | |
| Feedback voltage | VFB | 0.776 | 0.8 | 0.824 | V | Specification referred to TJ from -40 to +125 °C (footnote 1) | 5 |
| Reference load regulation | %VOUT/IOUT | 0.5 | % | Isw = 10 mA to ILIM (2) | 5 | ||
| Reference line regulation | %VOUT/VIN | 0.4 | % | VIN = 4.0 V to 18 V (2) | 5 | ||
| Quiescent current | IQ | 1.5 | 2.5 | mA | Duty cycle = 0, no load, VFB = 1.2 V | 5 | |
| Total standby quiescent current | IQST-BY | 2 | 15 | µA | OFF | 5 | |
| EN threshold voltage (device ON level) | VEN | 1.2 | V | Device ON level | 5 | ||
| EN threshold voltage (device OFF level) | VEN | 0.4 | V | Device OFF level | 5 | ||
| Absolute max power input voltage | VINSW | -0.3 | 20 | V | 4 | ||
| Absolute max input voltage | VINA | -0.3 | 20 | V | 4 | ||
| Absolute max enable voltage | VEN | -0.3 | V | Upper limit printed as VINA (not a number) | 4 | ||
| Absolute max output switching voltage | VSW | -1 | V | Upper limit printed as VIN (not a number) | 4 | ||
| Absolute max output switching voltage (transient) | VSW | -2 | -1 | V | for 50 nsec | 4 | |
| Absolute max feedback voltage | VFB | -0.3 | 2.5 | V | 4 | ||
| Absolute max FB current | IFB | -1 | 1 | mA | 4 | ||
| Power dissipation (SO8-BW) | PTOT | 1.6 | W | TA < 60 °C | 4 | ||
| Operating junction temperature range | TOP | -40 | 150 | °C | 4 | ||
| Storage temperature range | Tstg | -55 | 150 | °C | 4 | ||
| Maximum thermal resistance junction-ambient (SO8-BW) | RthJA | 55 | °C/W | Package mounted on the demonstration board | 4 | ||
| Power input / feedback: Operating input voltage turn-on VCC threshold | VINON | 2.9 | V | 5 | |||
| Threshold hysteresis | VINHYS | 0.25 | V | 5 | |||
| High side switch ON resistance | RDSON-P | 95 | mΩ | ISW = 750 mA | 5 | ||
| Low side switch ON resistance | RDSON-N | 69 | mΩ | ISW = 750 mA | 5 | ||
| Total FB bias current | IFB | 50 | 5 | ||||
| EN current | IEN | 2 | µA | 5 | |||
| Soft-start duration | TSS | 1 | ms | 6 | |||
| Thermal shutdown | TSHDN | 150 | °C | 6 | |||
| Thermal shutdown hysteresis | 15 | °C | 6 |
CAD (KiCad official)
- Symbol:
ST1S40IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
st1s40idr-etched.step/st1s40idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);st1s40idr.step/st1s40idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (29 pp, sha256
a9f5e2e45241756b, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ST1S40IDR
**STMicroelectronics** · DC-DC Converters · SOIC-8
ST1S40IDR from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Regulator output switching pin connecting to the external inductor, switching between ground and VIN at 850 kHz switching frequency. |
| 2 | PGND | power_in | Power ground return path for low-side MOSFET driver and output stage circuits. |
| 3 | VINA | power_in | Unregulated DC input voltage with operating range from 4.0 V to 18 V. |
| 4 | EN | input | Enable control input; device turns ON when EN > 1.2 V and turns OFF when EN < 0.4 V, with internal pull-down to disable when floating. |
| 5 | FB | input | Feedback input for output voltage regulation at 0.8 V nominal; external resistor divider required for higher output voltages. |
| 6 | AGND | power_in | Analog ground reference for feedback circuit and error amplifier. |
| 7 | GND | power_in | Ground connection for improved current distribution. |
| 8 | VINSW | power_in | Power input voltage directly connected to high-side MOSFET; bypass capacitor required to minimize input voltage spikes. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage range | VIN | 4 | | 18 | V | | 5 |
| Switching frequency | FSW | 0.7 | 0.85 | 1 | MHz | | 5 |
| Maximum limiting current | ILIM | 4 | | 6 | A | (2) Guaranteed by design | 5 |
| Maximum duty cycle | DMAX | | | 100 | % | (2) Guaranteed by design | 5 |
| Feedback voltage | VFB | 0.784 | 0.8 | 0.816 | V | | 5 |
| Feedback voltage | VFB | 0.776 | 0.8 | 0.824 | V | Specification referred to TJ from -40 to +125 °C (footnote 1) | 5 |
| Reference load regulation | %VOUT/IOUT | | | 0.5 | % | Isw = 10 mA to ILIM (2) | 5 |
| Reference line regulation | %VOUT/VIN | | | 0.4 | % | VIN = 4.0 V to 18 V (2) | 5 |
| Quiescent current | IQ | | 1.5 | 2.5 | mA | Duty cycle = 0, no load, VFB = 1.2 V | 5 |
| Total standby quiescent current | IQST-BY | | 2 | 15 | µA | OFF | 5 |
| EN threshold voltage (device ON level) | VEN | 1.2 | | | V | Device ON level | 5 |
| EN threshold voltage (device OFF level) | VEN | | | 0.4 | V | Device OFF level | 5 |
| Absolute max power input voltage | VINSW | -0.3 | | 20 | V | | 4 |
| Absolute max input voltage | VINA | -0.3 | | 20 | V | | 4 |
| Absolute max enable voltage | VEN | -0.3 | | | V | Upper limit printed as VINA (not a number) | 4 |
| Absolute max output switching voltage | VSW | -1 | | | V | Upper limit printed as VIN (not a number) | 4 |
| Absolute max output switching voltage (transient) | VSW | -2 | | -1 | V | for 50 nsec | 4 |
| Absolute max feedback voltage | VFB | -0.3 | | 2.5 | V | | 4 |
| Absolute max FB current | IFB | -1 | | 1 | mA | | 4 |
| Power dissipation (SO8-BW) | PTOT | | | 1.6 | W | TA < 60 °C | 4 |
| Operating junction temperature range | TOP | -40 | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -55 | | 150 | °C | | 4 |
| Maximum thermal resistance junction-ambient (SO8-BW) | RthJA | | 55 | | °C/W | Package mounted on the demonstration board | 4 |
| Power input / feedback: Operating input voltage turn-on VCC threshold | VINON | | 2.9 | | V | | 5 |
| Threshold hysteresis | VINHYS | | 0.25 | | V | | 5 |
| High side switch ON resistance | RDSON-P | | 95 | | mΩ | ISW = 750 mA | 5 |
| Low side switch ON resistance | RDSON-N | | 69 | | mΩ | ISW = 750 mA | 5 |
| Total FB bias current | IFB | | 50 | | | | 5 |
| EN current | IEN | | 2 | | µA | | 5 |
| Soft-start duration | TSS | | 1 | | ms | | 6 |
| Thermal shutdown | TSHDN | | 150 | | °C | | 6 |
| Thermal shutdown hysteresis | | | 15 | | °C | | 6 |
## CAD (KiCad official)
- Symbol: `ST1S40IDR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `st1s40idr-etched.step` / `st1s40idr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `st1s40idr.step` / `st1s40idr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879819036119040) (29 pp, sha256 `a9f5e2e45241756b`, retrieved 2026-09-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/st1s40idr-datasheet.pdf)