SST26VF032B-104I

{
  "schema_version": 1,
  "type": "component",
  "slug": "sst26vf032b-104i",
  "title": "SST26VF032B-104I",
  "brief": "Microchip Tech NOR FLASH, SOIC-8-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "memory",
    "sst26vf032b-104i",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SST26VF032B-104I",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8-208mil",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926385842348032",
    "parts": {
      "symbol": "sst26vf032b-104i.kicad_sym",
      "footprint": "sst26vf032b-104i.kicad_mod",
      "model_3d": "sst26vf032b-104i-hero.glb",
      "model_3d_plain": "sst26vf032b-104i-etched.glb",
      "model_3d_step": "sst26vf032b-104i-etched.step",
      "model_3d_step_plain": "sst26vf032b-104i.step",
      "lbr": "sst26vf032b-104i.lbr"
    },
    "distributor_links": {
      "lcsc": "C1523856"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T03:02:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CE#",
        "type": "input",
        "description": "Chip Enable: the device is enabled by a high-to-low transition on CE#, and CE# must remain low for the duration of any command sequence or write command/data input sequence."
      },
      {
        "number": "2",
        "name": "SO/SIO1",
        "type": "bidirectional",
        "description": "Serial Data Output for SPI mode (default after power-on) shifts data out on the falling edge of SCK; it is SIO1 of the 4-bit I/O bus when the Enable Quad I/O (EQIO) command is used."
      },
      {
        "number": "3",
        "name": "WP#/SIO2",
        "type": "bidirectional",
        "description": "Write-Protect is used with the WPEN and IOC bits in the Configuration register to prohibit writes to the Block Protection register and works only in SPI single-bit and dual-bit read mode; it is SIO2 in Quad I/O mode."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "SI/SIO0",
        "type": "bidirectional",
        "description": "Serial Data Input for SPI mode (default after power-on) latches inputs on the rising edge of SCK; it is SIO0 of the 4-bit I/O bus when Quad I/O mode is enabled."
      },
      {
        "number": "6",
        "name": "SCK",
        "type": "input",
        "description": "Serial Clock provides the timing of the serial interface; commands, addresses, and input data are latched on the rising edge and output data is shifted out on the falling edge."
      },
      {
        "number": "7",
        "name": "HOLD#/SIO3",
        "type": "bidirectional",
        "description": "Hold temporarily stops serial communication while the device is selected and works only in SPI single-bit and dual-bit read mode; it must be tied high when not in use, and it is SIO3 in Quad I/O mode."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Power Supply: provides the device supply voltage (2.7V-3.6V or 2.3V-3.6V per the features list)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package naming differs: the user hint says SOIC-8-208mil, while the datasheet lists '8-lead SOIJ (5.; The 8-lead SOIC pin numbers were inferred from the Figure 2-1 text extraction, which lists the left ; Pins 2, 3, 5 and 7 are multiplexed: they are SPI-mode signals by default and SIO bus signals in Quad"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0817,
        "at": "2026-10-19T03:02:11"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926385842348032",
        "pages": 81,
        "sha256": "2566847338399047",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sst26vf032b-104i.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sst26vf032b-104i-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ca6474fe111ee2be20e9486dea0896c2ca5dbd7d0255fc32b19297564dc53a7c",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "SOIC-8-208mil",
      "Category": "Memory",
      "Pins": "8"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "2566847338399047875bc4e5c8f5235a9d8d64b34495bcd65a1285af5eaaab59",
      "rows": [
        {
          "name": "Industrial ambient temperature range",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "Industrial grade",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "VDD supply voltage",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.3,
          "typ": null,
          "max": 3.6,
          "conditions": "Operating range (merged VDD cell for all grades)",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Temperature under bias",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "DC voltage on any pin to ground potential",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": null,
          "conditions": "Printed max is VDD+0.5V",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Transient voltage on any pin to ground potential",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -2,
          "typ": null,
          "max": null,
          "conditions": "<20 ns; printed max is VDD+2.0V",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Package power dissipation capability",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "W",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "TA = 25°C",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "VDD minimum to read operation",
          "symbol": "TPU-READ",
          "kind": "timing",
          "unit": "µs",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "VDD minimum to write operation",
          "symbol": "TPU-WRITE",
          "kind": "timing",
          "unit": "µs",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Power-down duration",
          "symbol": "TPD",
          "kind": "timing",
          "unit": "ms",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "VDD off time",
          "symbol": "VOFF",
          "kind": "timing",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.3,
          "conditions": "0V recommended",
          "source_page": 42,
          "source": "datasheet"
        },
        {
          "name": "Read current",
          "symbol": "IDDR1",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 8,
          "max": 15,
          "conditions": "VDD=VDD Max, CE# = 0.1 VDD/0.9 VDD @40 MHz, SO = open",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Read current",
          "symbol": "IDDR2",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "VDD = VDD Max, CE# = 0.1 VDD/0.9 VDD @104 MHz, SO = open",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Program and erase current",
          "symbol": "IDDW1",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "CE# = VDD Max",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Standby current",
          "symbol": "ISB1",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 15,
          "max": 45,
          "conditions": "CE# = VDD, VIN = VDD or VSS",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Input leakage current",
          "symbol": "ILI",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 2,
          "conditions": "VIN = GND to VDD, VDD = VDD Max",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Output leakage current",
          "symbol": "ILO",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 2,
          "conditions": "VOUT = GND to VDD, VDD = VDD Max",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Input low voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "VDD = VDD Min",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Output low voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "IOL = 100 µA, VDD = VDD Min",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Output pin capacitance",
          "symbol": "COUT",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "TA = 25°C, F = 1 MHz, other pins open; VOUT = 0V",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Input capacitance",
          "symbol": "CIN",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "TA = 25°C, F = 1 MHz, other pins open; VIN = 0V",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Endurance",
          "symbol": "NEND",
          "kind": "electrical",
          "unit": "Cycles",
          "min": 100000,
          "typ": null,
          "max": null,
          "conditions": "JEDEC Standard A117 and AEC-Q100-005",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Data retention",
          "symbol": "TDR",
          "kind": "electrical",
          "unit": "Years",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "JEDEC Standard A103 and AEC-Q100-005",
          "source_page": 44,
          "source": "datasheet"
        },
        {
          "name": "Sector erase time",
          "symbol": "TSE",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "VDD = 2.3V-3.6V",
          "source_page": 45,
          "source": "datasheet"
        },
        {
          "name": "Block erase time",
          "symbol": "TBE",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "VDD = 2.3V-3.6V",
          "source_page": 45,
          "source": "datasheet"
        },
        {
          "name": "Chip erase time",
          "symbol": "TSCE",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "VDD = 2.3V-3.6V",
          "source_page": 45,
          "source": "datasheet"
        },
        {
          "name": "Page program time",
          "symbol": "TPP",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 1.5,
          "conditions": "VDD = 2.3V-3.6V",
          "source_page": 45,
          "source": "datasheet"
        },
        {
          "name": "Program security-ID time",
          "symbol": "TPSID",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 1.5,
          "conditions": "VDD = 2.3V-3.6V",
          "source_page": 45,
          "source": "datasheet"
        },
        {
          "name": "Write suspend latency",
          "symbol": "TWS",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "VDD = 2.3V-3.6V",
          "source_page": 45,
          "source": "datasheet"
        },
        {
          "name": "Write protection enable bit latency",
          "symbol": "TWPEN",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "VDD = 2.3V-3.6V",
          "source_page": 45,
          "source": "datasheet"
        },
        {
          "name": "Serial clock frequency",
          "symbol": "FCLK",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 104,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "Serial clock period",
          "symbol": "TCLK",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 9.6,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "Serial clock high time",
          "symbol": "TSCKH",
          "kind": "timing",
          "unit": "ns",
          "min": 4.5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "Serial clock low time",
          "symbol": "TSCKL",
          "kind": "timing",
          "unit": "ns",
          "min": 4.5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "Serial clock rise time (slew rate)",
          "symbol": "TSCKR",
          "kind": "timing",
          "unit": "V/ns",
          "min": 0.1,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "Serial clock fall time (slew rate)",
          "symbol": "TSCKF",
          "kind": "timing",
          "unit": "V/ns",
          "min": 0.1,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "CE# active setup time",
          "symbol": "TCES",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits; relative to SCK",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "CE# active hold time",
          "symbol": "TCEH",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits; relative to SCK",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "CE# not active setup time",
          "symbol": "TCHS",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits; relative to SCK",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "CE# not active hold time",
          "symbol": "TCHH",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits; relative to SCK",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "CE# high time",
          "symbol": "TCPH",
          "kind": "timing",
          "unit": "ns",
          "min": 12,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "CE# high to high-Z output",
          "symbol": "TCHZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 12,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "SCK low to low-Z output",
          "symbol": "TCLZ",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "HOLD# low setup time",
          "symbol": "THLS",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "HOLD# high setup time",
          "symbol": "THHS",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "HOLD# low hold time",
          "symbol": "THLH",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "HOLD# high hold time",
          "symbol": "THHH",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "HOLD# low-to-high-Z output",
          "symbol": "THZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "HOLD# high-to-low-Z output",
          "symbol": "TLZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "Data in setup time",
          "symbol": "TDS",
          "kind": "timing",
          "unit": "ns",
          "min": 3,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "Data in hold time",
          "symbol": "TDH",
          "kind": "timing",
          "unit": "ns",
          "min": 4,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "Output hold from SCK change",
          "symbol": "TOH",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "VDD = 2.3V-3.6V, 104 MHz limits",
          "source_page": 46,
          "source": "datasheet"
        },
        {
          "name": "Reset to read (non-data operation)",
          "symbol": "TR(o)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 47,
          "source": "datasheet"
        },
        {
          "name": "Reset recovery from program or suspend",
          "symbol": "TR(p)",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "",
          "source_page": 47,
          "source": "datasheet"
        },
        {
          "name": "Reset recovery from erase",
          "symbol": "TR(e)",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "",
          "source_page": 47,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sst26vf032b-104i"
  ],
  "discovery_pitch": "SST26VF032B-104I (Microchip Tech) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sst26vf032b-104i.kicad_sym",
    "sst26vf032b-104i.kicad_mod",
    "sst26vf032b-104i.glb",
    "sst26vf032b-104i.step",
    "sst26vf032b-104i.lbr",
    "docs/hero.png",
    "docs/sst26vf032b-104i-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sst26vf032b-104i-hero.glb",
    "sst26vf032b-104i-hero.overlay.json",
    "sst26vf032b-104i-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}