JST SSHL-002T-P0.2 loose crimp contact
Public Made by Adomby adom
GH loose crimp contact; exact identity, native assets and provenance, with physical fit unqualified.
8a9d084
4d ago
JST SSHL-002T-P0.2 crimp contact
JST GH 1.25 mm crimp contact, with portable native KiCad documentation and explicitly provisional nominal geometry.
Manufacturer GH drawing · JST handling precautions
The keyed GH family uses SSHL-002T-P0.2 contacts. SSHL-003 variants are not compatible. Applicable wire range is AWG30–26 with insulation diameter0.76–1.00mm. Series rating is1A with AWG26,50V; −40 to105°C including current-related heating. These ratings are not a guarantee for every harness wire or application.
Tin-plated copper-alloy contact. Manufacturer drawing gives4.8mm overall length and0.8×0.55mm socket section. The supplied original loose-contact illustration omits working spring and retention details and approximates the open crimp wings. It is not an installed/crimped model. There are no PCB solder pads; use its off-board symbol and mechanical envelope only.
Use JST's specified tooling and establish the contact-specific conductor/insulation crimp settings with the actual wire. General handling guidance calls for stranded tin-plated annealed copper wire; solder-dipped end preparation requires separate review. Physical retention, pull test, mating orientation, installed cable bend and service-life qualification remain open. Native asset validation and live wiki review are recorded separately; publication is not hardware approval.
Reusable assets
Native symbol · Interactive symbol · Native footprint · Interactive footprint · STEP
Local top, underside and oblique renders have been reviewed. Live wiki rendering remains pending; see provenance.json.
This off-board component has no copper pads. Its plain GLB is retained under the documented zero-pad hero limitation; no fictitious PCB pads are added.
Tool and supply-form review
JST WC-GH2630 is a mini-reel hand tool for SSHL-002 contacts. Verify the correct mini-reel consumable and tool instructions; cut loose contacts are not automatically compatible with a reel-fed tool. The simplified loose-contact CAD illustrates a terminal, not the ordered packaging or an installed crimp. Confirm wire insulation OD, strip length, crimp setup and pull-test criteria using the actual fan leads. Do not substitute a generic crimper or invent extraction force.
Check mating latch access separately from individual-terminal depinning. AIFlow wiring review covers color/pin identity, bend radius, service space and duplicate-wire geometry.
# JST SSHL-002T-P0.2 crimp contact
JST GH 1.25 mm crimp contact, with portable native KiCad documentation and explicitly provisional nominal geometry.
[Manufacturer GH drawing](https://www.jst-mfg.com/product/pdf/eng/eGH.pdf) · [JST handling precautions](https://www.jst-mfg.com/product/pdf/eng/handling_e.pdf)
The keyed GH family uses **SSHL-002T-P0.2** contacts. SSHL-003 variants are not compatible. Applicable wire range is AWG30–26 with insulation diameter0.76–1.00mm. Series rating is1A with AWG26,50V; −40 to105°C including current-related heating. These ratings are not a guarantee for every harness wire or application.
Tin-plated copper-alloy contact. Manufacturer drawing gives4.8mm overall length and0.8×0.55mm socket section. The supplied original loose-contact illustration omits working spring and retention details and approximates the open crimp wings. It is not an installed/crimped model. There are no PCB solder pads; use its off-board symbol and mechanical envelope only.
Use JST's specified tooling and establish the contact-specific conductor/insulation crimp settings with the actual wire. General handling guidance calls for stranded tin-plated annealed copper wire; solder-dipped end preparation requires separate review. Physical retention, pull test, mating orientation, installed cable bend and service-life qualification remain open. Native asset validation and live wiki review are recorded separately; publication is not hardware approval.
## Reusable assets
[Native symbol](sshl-002t-p0-2.kicad_sym) · [Interactive symbol](symbol.html) · [Native footprint](sshl-002t-p0-2.kicad_mod) · [Interactive footprint](footprint.html) · [STEP](sshl-002t-p0-2.step)
Local top, underside and oblique renders have been reviewed. Live wiki rendering remains pending; see provenance.json.
This off-board component has no copper pads. Its plain GLB is retained under the documented [zero-pad hero limitation](https://wiki.adom.inc/adom/component-hero/issues/1); no fictitious PCB pads are added.
## Tool and supply-form review
[JST WC-GH2630](https://www.jst.co.uk/productSeries.php?cat=71&pid=10728) is a mini-reel hand tool for SSHL-002 contacts. Verify the correct mini-reel consumable and tool instructions; cut loose contacts are not automatically compatible with a reel-fed tool. The simplified loose-contact CAD illustrates a terminal, not the ordered packaging or an installed crimp. Confirm wire insulation OD, strip length, crimp setup and pull-test criteria using the actual fan leads. Do not substitute a generic crimper or invent extraction force.
Check mating latch access separately from individual-terminal depinning. [AIFlow wiring review](https://wiki.adom.inc/adom/adom-aiflow-wiring) covers color/pin identity, bend radius, service space and duplicate-wire geometry.