SSCDJJN010NG7A5

{
  "slug": "sscdjjn010ng7a5",
  "version": "0.1.0",
  "type": "component",
  "description": "Honeywell Pressure Sensors, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "sscdjjn010ng7a5",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sscdjjn010ng7a5.kicad_sym",
    "sscdjjn010ng7a5.kicad_mod",
    "sscdjjn010ng7a5.glb",
    "sscdjjn010ng7a5.step",
    "sscdjjn010ng7a5.lbr",
    "docs/hero.png",
    "docs/sscdjjn010ng7a5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sscdjjn010ng7a5-hero.glb",
    "sscdjjn010ng7a5-hero.overlay.json",
    "sscdjjn010ng7a5-etched.glb"
  ],
  "component": {
    "mpn": "SSCDJJN010NG7A5",
    "manufacturer": "Honeywell",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "Sensors",
    "subcategory": "Pressure Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603593387849097216",
    "parts": {
      "symbol": "sscdjjn010ng7a5.kicad_sym",
      "footprint": "sscdjjn010ng7a5.kicad_mod",
      "model_3d": "sscdjjn010ng7a5-hero.glb",
      "model_3d_plain": "sscdjjn010ng7a5-etched.glb",
      "model_3d_step": "sscdjjn010ng7a5-etched.step",
      "model_3d_step_plain": "sscdjjn010ng7a5.step",
      "lbr": "sscdjjn010ng7a5.lbr"
    },
    "distributor_links": {
      "lcsc": "C19746382",
      "mouser": "785-SSCDJJN010NG7A5"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T08:41:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "error"
      },
      "mouser": {
        "pn": "785-SSCDJJN010NG7A5",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the sensor; the datasheet states the sensor is not reverse polarity protected, so applying supply or ground to the wrong pin may cause electrical failure."
      },
      {
        "number": "2",
        "name": "Vsupply",
        "type": "power_in",
        "description": "Single supply input; the 5.0 Vdc option for pressure ranges below 40 mbar/4 kPa/20 inH2O is specified at 4.95 Vdc min to 5.05 Vdc max (Table 6), and the absolute maximum supply voltage is 6.0 Vdc (Table 1)."
      },
      {
        "number": "3",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data line for the digital output; the datasheet specifies a pull-up on SDA but gives no pull-up resistor value."
      },
      {
        "number": "4",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock line; the maximum I2C clock frequency is 400 kHz (Table 1)."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected; the datasheet assigns no function to this pin for the I2C output."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected; the datasheet assigns no function to this pin for the I2C output."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected; the datasheet assigns no function to this pin for the I2C output."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected; the datasheet assigns no function to this pin for the I2C output."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MPN decoding: SSC (series) / D (DIP) / JJ (dual radial barbless ports, same side) / N (dry gases, no; Pin directions for SDA (bidirectional) and SCL (input) are inferred from standard I2C operation; the; The supply range shown for Vsupply is the 5.0 Vdc value for pressure ranges below 40 mbar/4 kPa/20 i"
        ],
        "pages_sent": 33,
        "cost_usd": 0.1651,
        "at": "2026-10-19T08:41:08"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603593387849097216",
        "pages": 33,
        "sha256": "8d7866015ae9fb39",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sscdjjn010ng7a5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sscdjjn010ng7a5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b9929de2f771da454ab722aa082304a011cb2679d71f38303d892a818ab7ed18",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}