component
SSCDJJN010NG7A5
Public Made by Adomby adom
Honeywell Pressure Sensors, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSSCDJJN010NG7A5
Honeywell · Pressure Sensors · DIP-8
SSCDJJN010NG7A5 from Honeywell, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the sensor; the datasheet states the sensor is not reverse polarity protected, so applying supply or ground to the wrong pin may cause electrical failure. |
| 2 | Vsupply | power_in | Single supply input; the 5.0 Vdc option for pressure ranges below 40 mbar/4 kPa/20 inH2O is specified at 4.95 Vdc min to 5.05 Vdc max (Table 6), and the absolute maximum supply voltage is 6.0 Vdc (Table 1). |
| 3 | SDA | bidirectional | I2C serial data line for the digital output; the datasheet specifies a pull-up on SDA but gives no pull-up resistor value. |
| 4 | SCL | input | I2C serial clock line; the maximum I2C clock frequency is 400 kHz (Table 1). |
| 5 | NC | unconnected | Not connected; the datasheet assigns no function to this pin for the I2C output. |
| 6 | NC | unconnected | Not connected; the datasheet assigns no function to this pin for the I2C output. |
| 7 | NC | unconnected | Not connected; the datasheet assigns no function to this pin for the I2C output. |
| 8 | NC | unconnected | Not connected; the datasheet assigns no function to this pin for the I2C output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Honeywell |
| Package | DIP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | Vsupply | -0.3 | 6 | Vdc | 7 | ||
| Voltage on any pin | -0.3 | V | 7 | ||||
| Digital interface clock frequency, I2C | 100 | 400 | kHz | I2C | 7 | ||
| Digital interface clock frequency, SPI | 50 | 800 | kHz | SPI | 7 | ||
| ESD susceptibility (human body model) | 3 | kV | human body model | 7 | |||
| Storage temperature | -40 | 85 | °C | 7 | |||
| Lead solder time (SIP, DIP) | 4 | s | at 250 °C | 7 |
CAD (KiCad official)
- Symbol:
SSCDJJN010NG7A5 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
sscdjjn010ng7a5-etched.step/sscdjjn010ng7a5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sscdjjn010ng7a5.step/sscdjjn010ng7a5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Honeywell datasheet (33 pp, sha256
8d7866015ae9fb39, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).