main
History Download
Ray Publish 0.1.0 41d5c20

SRC4392IPFB

Texas Instruments · Audio Interface ICs · TQFP-48(7x7)

SRC4392IPFB from Texas Instruments, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RX1+ input Line receiver 1, noninverting input.
2 RX1- input Line receiver 1, inverting input.
3 RX2+ input Line receiver 2, noninverting input.
4 RX2- input Line receiver 2, inverting input.
5 RX3+ input Line receiver 3, noninverting input.
6 RX3- input Line receiver 3, inverting input.
7 RX4+ input Line receiver 4, noninverting input.
8 RX4- input Line receiver 4, inverting input.
9 VCC power_in DIR comparator and PLL power supply, +3.3V nominal (+3.0V to +3.6V).
10 AGND power_in DIR comparator and PLL power-supply ground; BGND (pin 44) is connected to it.
11 LOCK output DIR PLL lock flag, active low.
12 RXCKO tri_state DIR recovered master clock (3-state output).
13 RXCKI input DIR reference clock input.
14 MUTE input SRC output mute, active high.
15 RDY output SRC ready flag, active low.
16 DGND1 power_in Digital core ground.
17 VDD18 power_in Digital core supply, +1.8V nominal (+1.65V to +1.95V).
18 CPM input Control port mode select: 0 = SPI mode, 1 = I2C mode.
19 CS/A0 input Active-low chip select in SPI mode, or programmable slave address bit A0 in I2C mode.
20 CCLK/SCL input Serial data clock for SPI mode or I2C mode.
21 CDIN/A1 input SPI serial data input, or programmable slave address bit A1 in I2C mode.
22 CDOUT/SDA bidirectional SPI serial data output (3-state) or serial data I/O for I2C mode.
23 INT output Interrupt flag, open-drain active low; requires a pull-up to VIO.
24 RST input Reset input, active low.
25 MCLK input Master clock input, 1 MHz to 27.7 MHz.
26 GPO1 output General-purpose output 1, programmable via control register 0x1B.
27 GPO2 output General-purpose output 2, programmable via control register 0x1C.
28 GPO3 output General-purpose output 3, programmable via control register 0x1D.
29 GPO4 output General-purpose output 4, programmable via control register 0x1E.
30 DGND2 power_in DIR line receiver bias and DIT line driver digital ground.
31 TX- output DIT line driver inverting output.
32 TX+ output DIT line driver noninverting output.
33 VDD33 power_in DIR line receiver bias and DIT line driver supply, +3.3V nominal (+3.0V to +3.6V).
34 AESOUT output DIT buffered AES3-encoded data output.
35 BLS bidirectional DIT block start clock, configurable as input or output.
36 SYNC output DIT internal sync clock output.
37 BCKA bidirectional Audio serial Port A bit clock.
38 LRCKA bidirectional Audio serial Port A left/right clock.
39 SDINA input Audio serial Port A data input.
40 SDOUTA output Audio serial Port A data output.
41 NC unconnected No internal signal connection, internally bonded to ESD pad.
42 VIO power_in Logic I/O supply, +1.65V to +3.6V.
43 DGND3 power_in Logic I/O ground.
44 BGND power_in Substrate ground, connect to AGND (pin 10) by a PCB trace.
45 SDOUTB output Audio serial Port B data output.
46 SDINB input Audio serial Port B data input.
47 LRCKB bidirectional Audio serial Port B left/right clock.
48 BCKB bidirectional Audio serial Port B bit clock.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TQFP-48(7x7)
Category Communication Interface Chip/UART/485/232
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD18 supply VDD18 -0.3 2 V 3
VDD33 supply VDD33 -0.3 4 V 3
VIO supply VIO -0.3 4 V 3
VCC supply VCC -0.3 4 V 3
Input current (all pins except power and ground) -10 10 mA 3
Ambient operating temperature -40 85 °C 3
Storage temperature -65 150 °C 3
VDD18 recommended supply VDD18 1.65 1.8 1.95 V 8
VDD33 recommended supply VDD33 3 3.3 3.6 V 8
VIO recommended supply VIO 1.65 3.3 3.6 V 8
VCC recommended supply VCC 3 3.3 3.6 V 8
High-level input current IIH 0.5 10 μA 4
Low-level input current IIL 0.5 10 μA 4
Line receiver input sensitivity VTH 150 200 mV Voltage across a given differential input pair 4
MCLK frequency fMCLK 1 27.7 MHz 4
MCLK duty cycle fMCLKD 45 55 % 4
SRC input or output sampling rate fSIN or fSOUT 4 216 kHz 4
DIR PLL lock range 20 216 kHz 6
RXCKI frequency fRXCKI 3.5 27.7 MHz 6
RXCKI duty cycle fRXCKID 45 55 % 6
RXCKO frequency fRXCKO 3.5 27.7 MHz 6
RXCKO duty cycle fRXCKOD 45 55 % 6
LRCK clock frequency fLRCK 0 216 kHz 6
BCK clock frequency fBCK 0 13.824 MHz 6
CCLK frequency fCCLK 0 40 MHz 6
I2C standard SCL frequency fSCL 0 100 kHz Standard mode 7
I2C fast SCL frequency fSCL 0 400 kHz Fast mode 7
VDD18 quiescent current IDD18Q 3.1 mA VDD18 = +1.8V, all blocks powered up, no clocks 8
VDD18 high sampling rate current IDD18H 58 mA VDD18 = +1.8V, fS = 192kHz 8
Total power dissipation, high sampling rate 326 mW All blocks powered up, fS = 192kHz 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts nickel SD NI A (pin 39) or SDINB (pin 4 )6 LRCKA (pin 3 ) or8 LRCKB ( i 47) p n 25

CAD (KiCad official)

  • Symbol: SRC4392IPFB
  • Footprint: Package_QFP:TQFP-48_7x7mm_P0.5mm
  • 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: src4392ipfb-etched.step / src4392ipfb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); src4392ipfb.step / src4392ipfb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (95 pp, sha256 873894c2c2b1048a, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF