component
SRC4392IPFB
Public Made by Adomby adom
Texas Instruments Audio Interface ICs, TQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
SRC4392IPFB
Texas Instruments · Audio Interface ICs · TQFP-48(7x7)
SRC4392IPFB from Texas Instruments, in a TQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RX1+ | input | Line receiver 1, noninverting input. |
| 2 | RX1- | input | Line receiver 1, inverting input. |
| 3 | RX2+ | input | Line receiver 2, noninverting input. |
| 4 | RX2- | input | Line receiver 2, inverting input. |
| 5 | RX3+ | input | Line receiver 3, noninverting input. |
| 6 | RX3- | input | Line receiver 3, inverting input. |
| 7 | RX4+ | input | Line receiver 4, noninverting input. |
| 8 | RX4- | input | Line receiver 4, inverting input. |
| 9 | VCC | power_in | DIR comparator and PLL power supply, +3.3V nominal (+3.0V to +3.6V). |
| 10 | AGND | power_in | DIR comparator and PLL power-supply ground; BGND (pin 44) is connected to it. |
| 11 | LOCK | output | DIR PLL lock flag, active low. |
| 12 | RXCKO | tri_state | DIR recovered master clock (3-state output). |
| 13 | RXCKI | input | DIR reference clock input. |
| 14 | MUTE | input | SRC output mute, active high. |
| 15 | RDY | output | SRC ready flag, active low. |
| 16 | DGND1 | power_in | Digital core ground. |
| 17 | VDD18 | power_in | Digital core supply, +1.8V nominal (+1.65V to +1.95V). |
| 18 | CPM | input | Control port mode select: 0 = SPI mode, 1 = I2C mode. |
| 19 | CS/A0 | input | Active-low chip select in SPI mode, or programmable slave address bit A0 in I2C mode. |
| 20 | CCLK/SCL | input | Serial data clock for SPI mode or I2C mode. |
| 21 | CDIN/A1 | input | SPI serial data input, or programmable slave address bit A1 in I2C mode. |
| 22 | CDOUT/SDA | bidirectional | SPI serial data output (3-state) or serial data I/O for I2C mode. |
| 23 | INT | output | Interrupt flag, open-drain active low; requires a pull-up to VIO. |
| 24 | RST | input | Reset input, active low. |
| 25 | MCLK | input | Master clock input, 1 MHz to 27.7 MHz. |
| 26 | GPO1 | output | General-purpose output 1, programmable via control register 0x1B. |
| 27 | GPO2 | output | General-purpose output 2, programmable via control register 0x1C. |
| 28 | GPO3 | output | General-purpose output 3, programmable via control register 0x1D. |
| 29 | GPO4 | output | General-purpose output 4, programmable via control register 0x1E. |
| 30 | DGND2 | power_in | DIR line receiver bias and DIT line driver digital ground. |
| 31 | TX- | output | DIT line driver inverting output. |
| 32 | TX+ | output | DIT line driver noninverting output. |
| 33 | VDD33 | power_in | DIR line receiver bias and DIT line driver supply, +3.3V nominal (+3.0V to +3.6V). |
| 34 | AESOUT | output | DIT buffered AES3-encoded data output. |
| 35 | BLS | bidirectional | DIT block start clock, configurable as input or output. |
| 36 | SYNC | output | DIT internal sync clock output. |
| 37 | BCKA | bidirectional | Audio serial Port A bit clock. |
| 38 | LRCKA | bidirectional | Audio serial Port A left/right clock. |
| 39 | SDINA | input | Audio serial Port A data input. |
| 40 | SDOUTA | output | Audio serial Port A data output. |
| 41 | NC | unconnected | No internal signal connection, internally bonded to ESD pad. |
| 42 | VIO | power_in | Logic I/O supply, +1.65V to +3.6V. |
| 43 | DGND3 | power_in | Logic I/O ground. |
| 44 | BGND | power_in | Substrate ground, connect to AGND (pin 10) by a PCB trace. |
| 45 | SDOUTB | output | Audio serial Port B data output. |
| 46 | SDINB | input | Audio serial Port B data input. |
| 47 | LRCKB | bidirectional | Audio serial Port B left/right clock. |
| 48 | BCKB | bidirectional | Audio serial Port B bit clock. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TQFP-48(7x7) |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD18 supply | VDD18 | -0.3 | 2 | V | 3 | ||
| VDD33 supply | VDD33 | -0.3 | 4 | V | 3 | ||
| VIO supply | VIO | -0.3 | 4 | V | 3 | ||
| VCC supply | VCC | -0.3 | 4 | V | 3 | ||
| Input current (all pins except power and ground) | -10 | 10 | mA | 3 | |||
| Ambient operating temperature | -40 | 85 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| VDD18 recommended supply | VDD18 | 1.65 | 1.8 | 1.95 | V | 8 | |
| VDD33 recommended supply | VDD33 | 3 | 3.3 | 3.6 | V | 8 | |
| VIO recommended supply | VIO | 1.65 | 3.3 | 3.6 | V | 8 | |
| VCC recommended supply | VCC | 3 | 3.3 | 3.6 | V | 8 | |
| High-level input current | IIH | 0.5 | 10 | μA | 4 | ||
| Low-level input current | IIL | 0.5 | 10 | μA | 4 | ||
| Line receiver input sensitivity | VTH | 150 | 200 | mV | Voltage across a given differential input pair | 4 | |
| MCLK frequency | fMCLK | 1 | 27.7 | MHz | 4 | ||
| MCLK duty cycle | fMCLKD | 45 | 55 | % | 4 | ||
| SRC input or output sampling rate | fSIN or fSOUT | 4 | 216 | kHz | 4 | ||
| DIR PLL lock range | 20 | 216 | kHz | 6 | |||
| RXCKI frequency | fRXCKI | 3.5 | 27.7 | MHz | 6 | ||
| RXCKI duty cycle | fRXCKID | 45 | 55 | % | 6 | ||
| RXCKO frequency | fRXCKO | 3.5 | 27.7 | MHz | 6 | ||
| RXCKO duty cycle | fRXCKOD | 45 | 55 | % | 6 | ||
| LRCK clock frequency | fLRCK | 0 | 216 | kHz | 6 | ||
| BCK clock frequency | fBCK | 0 | 13.824 | MHz | 6 | ||
| CCLK frequency | fCCLK | 0 | 40 | MHz | 6 | ||
| I2C standard SCL frequency | fSCL | 0 | 100 | kHz | Standard mode | 7 | |
| I2C fast SCL frequency | fSCL | 0 | 400 | kHz | Fast mode | 7 | |
| VDD18 quiescent current | IDD18Q | 3.1 | mA | VDD18 = +1.8V, all blocks powered up, no clocks | 8 | ||
| VDD18 high sampling rate current | IDD18H | 58 | mA | VDD18 = +1.8V, fS = 192kHz | 8 | ||
| Total power dissipation, high sampling rate | 326 | mW | All blocks powered up, fS = 192kHz | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | nickel | SD NI A (pin 39) or SDINB (pin 4 )6 LRCKA (pin 3 ) or8 LRCKB ( i 47) p n | 25 |
CAD (KiCad official)
- Symbol:
SRC4392IPFB - Footprint:
Package_QFP:TQFP-48_7x7mm_P0.5mm - 3D model: TQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
src4392ipfb-etched.step/src4392ipfb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);src4392ipfb.step/src4392ipfb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (95 pp, sha256
873894c2c2b1048a, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).