main
History Download
Ray Publish 0.1.0 86885a4

SR10LG-G

Microchip Tech · AC-DC Controllers & Regulators · SOIC-8

SR10LG-G from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SH passive SH is the shunt connection that carries the peak shunt current, rated at 220 mA minimum with VSH below 1.2V at 25°C, and is pulled down internally through 40 to 60 kΩ.
2 PGND power_in PGND is the power ground for the shunt, and PGND to AGND must stay within ±300mV according to the absolute maximum ratings.
3 AGND power_in AGND is the analog ground for the controller, and all voltages are referenced to the device ground pins.
4 FB input FB is the feedback input with a feedback threshold of 1.02 to 1.38 V, and its absolute maximum rating is 5.0V.
5 D24 passive D24 is the internal feedback divider 24V tap, giving a divider ratio of 19.40 to 20.60 V/V at VOUT = 24V.
6 D12 passive D12 is the internal feedback divider 12V tap, giving a divider ratio of 9.70 to 10.30 V/V at VOUT = 12V.
7 D6 passive D6 is the internal feedback divider 6.0V tap, giving a divider ratio of 4.85 to 5.15 V/V at VOUT = 6.0V.
8 OUT power_out OUT connects to the regulator output, with an absolute maximum rating of 40V for VOUT and VSH.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 6 28 V 2
Absolute maximum voltage VOUT, VSH VOUT, VSH 40 V 2
Absolute maximum feedback voltage VFB 5 V 2
Absolute maximum PGND to AGND voltage -300 300 mV 2
Absolute maximum RMS input current (SH to PGND) IIN(RMS) 300 mARMS 2
Absolute maximum DSH current (PGND to SH) IDSH 300 mA 2
Operating junction temperature -40 125 °C 2
Feedback threshold (shunt turn-off) VFB 1.02 1.2 1.38 V TA = 25°C 2
FB input bias current IFB -1 1 µA 2
Max shunt current ISH 220 mA VSH < 1.2V, 25OC 2
Max shunt current ISH 180 mA 85OC 2
Internal feedback divider ratio D6 ADIV 4.85 5 5.15 V/V VOUT = 6.0V 2
Internal feedback divider ratio D12 ADIV 9.7 10 10.3 V/V VOUT = 12V 2
Internal feedback divider ratio D24 ADIV 19.4 20 20.6 V/V VOUT = 24V 2
Shunt on resistance RSH 3 7 Ω 100mA SH to PGND; 100mA PGND to SH 2
Bias current into OUT pin IBIAS 220 400 µA 28V applied to the OUT pin 3
Pull-down resistance on SH RPD 40 50 60 kΩ VSH = 1.5V 3
Voltage at SH to turn the shunt on (SYNC) VSYNC 2 2.3 2.5 V 3
Voltage at SH to turn the shunt off when on (OCP) VOCP 2 2.3 2.5 V Shunt on 3
Internal divider resistance RDIV 500 kΩ OUT to AGND 2
Shunt diode voltage drop VD 880 mV I D = 220mA 2
Shunt current fall time tFALL 15 µs 90 - 10%, ISH = 100mA 3
OCP response time tOCP 15 µs Shunt on, ISHUNT < 10mA, See Figure 3 3
Typical thermal resistance junction to ambient (8-Lead SOIC) θja 101 °C/W 2

CAD (KiCad official)

  • Symbol: SR10LG-G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sr10lg-g-etched.step / sr10lg-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sr10lg-g.step / sr10lg-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (8 pp, sha256 b8fb3894e6d5ba3e, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF