Generated by kicad-footprint-generator · KiCad file format 20260206
SR10LG-G
Microchip Tech · AC-DC Controllers & Regulators · SOIC-8
SR10LG-G from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SH | passive | SH is the shunt connection that carries the peak shunt current, rated at 220 mA minimum with VSH below 1.2V at 25°C, and is pulled down internally through 40 to 60 kΩ. |
| 2 | PGND | power_in | PGND is the power ground for the shunt, and PGND to AGND must stay within ±300mV according to the absolute maximum ratings. |
| 3 | AGND | power_in | AGND is the analog ground for the controller, and all voltages are referenced to the device ground pins. |
| 4 | FB | input | FB is the feedback input with a feedback threshold of 1.02 to 1.38 V, and its absolute maximum rating is 5.0V. |
| 5 | D24 | passive | D24 is the internal feedback divider 24V tap, giving a divider ratio of 19.40 to 20.60 V/V at VOUT = 24V. |
| 6 | D12 | passive | D12 is the internal feedback divider 12V tap, giving a divider ratio of 9.70 to 10.30 V/V at VOUT = 12V. |
| 7 | D6 | passive | D6 is the internal feedback divider 6.0V tap, giving a divider ratio of 4.85 to 5.15 V/V at VOUT = 6.0V. |
| 8 | OUT | power_out | OUT connects to the regulator output, with an absolute maximum rating of 40V for VOUT and VSH. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 6 | 28 | V | 2 | ||
| Absolute maximum voltage VOUT, VSH | VOUT, VSH | 40 | V | 2 | |||
| Absolute maximum feedback voltage | VFB | 5 | V | 2 | |||
| Absolute maximum PGND to AGND voltage | -300 | 300 | mV | 2 | |||
| Absolute maximum RMS input current (SH to PGND) | IIN(RMS) | 300 | mARMS | 2 | |||
| Absolute maximum DSH current (PGND to SH) | IDSH | 300 | mA | 2 | |||
| Operating junction temperature | -40 | 125 | °C | 2 | |||
| Feedback threshold (shunt turn-off) | VFB | 1.02 | 1.2 | 1.38 | V | TA = 25°C | 2 |
| FB input bias current | IFB | -1 | 1 | µA | 2 | ||
| Max shunt current | ISH | 220 | mA | VSH < 1.2V, 25OC | 2 | ||
| Max shunt current | ISH | 180 | mA | 85OC | 2 | ||
| Internal feedback divider ratio D6 | ADIV | 4.85 | 5 | 5.15 | V/V | VOUT = 6.0V | 2 |
| Internal feedback divider ratio D12 | ADIV | 9.7 | 10 | 10.3 | V/V | VOUT = 12V | 2 |
| Internal feedback divider ratio D24 | ADIV | 19.4 | 20 | 20.6 | V/V | VOUT = 24V | 2 |
| Shunt on resistance | RSH | 3 | 7 | Ω | 100mA SH to PGND; 100mA PGND to SH | 2 | |
| Bias current into OUT pin | IBIAS | 220 | 400 | µA | 28V applied to the OUT pin | 3 | |
| Pull-down resistance on SH | RPD | 40 | 50 | 60 | kΩ | VSH = 1.5V | 3 |
| Voltage at SH to turn the shunt on (SYNC) | VSYNC | 2 | 2.3 | 2.5 | V | 3 | |
| Voltage at SH to turn the shunt off when on (OCP) | VOCP | 2 | 2.3 | 2.5 | V | Shunt on | 3 |
| Internal divider resistance | RDIV | 500 | kΩ | OUT to AGND | 2 | ||
| Shunt diode voltage drop | VD | 880 | mV | I D = 220mA | 2 | ||
| Shunt current fall time | tFALL | 15 | µs | 90 - 10%, ISH = 100mA | 3 | ||
| OCP response time | tOCP | 15 | µs | Shunt on, ISHUNT < 10mA, See Figure 3 | 3 | ||
| Typical thermal resistance junction to ambient (8-Lead SOIC) | θja | 101 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
SR10LG-G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sr10lg-g-etched.step/sr10lg-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sr10lg-g.step/sr10lg-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (8 pp, sha256
b8fb3894e6d5ba3e, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).