main
Ray Publish 0.1.0 f5bdb8a

SPX3819M5-L-3-6

MSKSEMI · Linear Voltage Regulators (LDO) · SOT-23-5

SPX3819M5-L-3-6 from MSKSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Input of supply voltage for the LDO; the datasheet's recommended input range is 2.0V to 24V.
2 GND power_in Ground pin for the regulator; input and output capacitor grounds should return to this pin through short, wide copper traces.
3 CE input Enable control input for the regulator; the datasheet gives no logic threshold for this pin.
4 NC unconnected No internal connection.
5 VOUT power_out Output of the regulator; the application guideline specifies an output capacitor between 1μF and 22μF with a minimum 1mΩ ESR, placed close to VOUT and GND.

Key specifications

Parameter Value
Manufacturer MSKSEMI
Package SOT-23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC Output Voltage Accuracy -2 2 % ILOAD =0.1mA 6
Supply Voltage VIN 2 24 V 6
Dropout Voltage VDROP 0.35 V ILOAD =100mA, VOUT ≥ 5V 6
Ground Current IQ 2.2 μA ILOAD = 0mA, VOUT = 5V 6
Line Regulation ΔLINE 0.3 % ILOAD =1mA, 5 ≤ VIN ≤ 30V 6
Load Regulation ΔLOAD 0.1 % 1mA ≤ ILOAD ≤ 0.2A 6
Output Current Limit ILIM 501 700 mA VOUT =0 6
Power Supply Rejection Ratio PSRR 70 dB VOUT =5V, ILOAD =1mA, VIN = 12V, f = 100Hz 6
VIN to GND -0.3 28 V 5
VOUT to VIN -28 0.3 V 5
Lead Temperature (Soldering) 260 °C Soldering, 10 sec. 5
Junction Temperature 150 °C 5
Storage Temperature Range -40 150 °C 5
ESD Susceptibility HBM 2 KV HBM 5
ESD Susceptibility MM 200 V MM 5
Package Thermal Resistance θJA 200 °C/W 5
Input Voltage VIN 2 24 V 5
Junction Temperature Range -40 125 °C 5
Ambient Temperature Range -40 85 °C 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper must be back to the SPX3819M5-L-X-X(MS) ground pin using as wide and as short of a copper trace as is practical. 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: SPX3819M5-L-3-6
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: spx3819m5-l-3-6-etched.step / spx3819m5-l-3-6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); spx3819m5-l-3-6.step / spx3819m5-l-3-6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MSKSEMI datasheet (9 pp, sha256 f32d391fa90a4a16, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF