Generated by kicad-footprint-generator · KiCad file format 20260206
SPX3819M5-L-3-6
MSKSEMI · Linear Voltage Regulators (LDO) · SOT-23-5
SPX3819M5-L-3-6 from MSKSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input of supply voltage for the LDO; the datasheet's recommended input range is 2.0V to 24V. |
| 2 | GND | power_in | Ground pin for the regulator; input and output capacitor grounds should return to this pin through short, wide copper traces. |
| 3 | CE | input | Enable control input for the regulator; the datasheet gives no logic threshold for this pin. |
| 4 | NC | unconnected | No internal connection. |
| 5 | VOUT | power_out | Output of the regulator; the application guideline specifies an output capacitor between 1μF and 22μF with a minimum 1mΩ ESR, placed close to VOUT and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Output Voltage Accuracy | -2 | 2 | % | ILOAD =0.1mA | 6 | ||
| Supply Voltage | VIN | 2 | 24 | V | 6 | ||
| Dropout Voltage | VDROP | 0.35 | V | ILOAD =100mA, VOUT ≥ 5V | 6 | ||
| Ground Current | IQ | 2.2 | μA | ILOAD = 0mA, VOUT = 5V | 6 | ||
| Line Regulation | ΔLINE | 0.3 | % | ILOAD =1mA, 5 ≤ VIN ≤ 30V | 6 | ||
| Load Regulation | ΔLOAD | 0.1 | % | 1mA ≤ ILOAD ≤ 0.2A | 6 | ||
| Output Current Limit | ILIM | 501 | 700 | mA | VOUT =0 | 6 | |
| Power Supply Rejection Ratio | PSRR | 70 | dB | VOUT =5V, ILOAD =1mA, VIN = 12V, f = 100Hz | 6 | ||
| VIN to GND | -0.3 | 28 | V | 5 | |||
| VOUT to VIN | -28 | 0.3 | V | 5 | |||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec. | 5 | |||
| Junction Temperature | 150 | °C | 5 | ||||
| Storage Temperature Range | -40 | 150 | °C | 5 | |||
| ESD Susceptibility HBM | 2 | KV | HBM | 5 | |||
| ESD Susceptibility MM | 200 | V | MM | 5 | |||
| Package Thermal Resistance | θJA | 200 | °C/W | 5 | |||
| Input Voltage | VIN | 2 | 24 | V | 5 | ||
| Junction Temperature Range | -40 | 125 | °C | 5 | |||
| Ambient Temperature Range | -40 | 85 | °C | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | must be back to the SPX3819M5-L-X-X(MS) ground pin using as wide and as short of a copper trace as is practical. | 7 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
SPX3819M5-L-3-6 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
spx3819m5-l-3-6-etched.step/spx3819m5-l-3-6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);spx3819m5-l-3-6.step/spx3819m5-l-3-6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (9 pp, sha256
f32d391fa90a4a16, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).