main
History Download
Ray Publish 0.2.0 62d9c17

SPX29302T5-L

MaxLinear · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-5

SPX29302T5-L from MaxLinear, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input, TTL-compatible. Drive high (>=2.4V) to enable the regulator; drive low (<=0.8V) to place the device in zero-current shutdown. Typical input current is ~20µA when active; up to 750µA at VEN=16V.
2 VIN power_in Input supply voltage. Continuous operating range up to 16V (absolute max 20V for <100ms). A 6.8µF (min) input capacitor is recommended; a 0.1µF ceramic to GND is advised if the source has high AC impedance.
3 GND power_in Ground reference for the regulator. Ground pin current is the quiescent current (typ. 30mA at IOUT=1.5A, ~40mA at 3A). The tab of the TO-263 is connected to GND and provides the primary thermal path (θJC = 3°C/W).
4 VOUT power_out Regulated output. Delivers up to 3A guaranteed with typical dropout of 600mV at 3A. Requires a minimum 10µF aluminum output capacitor for stability across all load conditions; requires a minimum load of 5mA.
5 ADJ input Adjust pin. Feedback node referenced to the internal 1.240V reference (VREF typ). Set VOUT via a resistor divider from VOUT to GND: VOUT = VREF x (1 + R1/R2). R2 recommended between 10kΩ and 47kΩ. Adjust pin bias current is typ. 40nA (max 120nA).
6 GND power_in Package tab (pad 6). the sheet does not name the tab's net; centre lead's net per the package (TO-263/TO-252 tab and centre lead are one piece of lead frame; task master ruling 2026-11-17): pin 3 is GND.

Key specifications

Parameter Value
Manufacturer MaxLinear
Package TO-263-5
Category PMIC
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference Voltage VREF 1.228 1.24 1.252 V 2
Reference Voltage (over operating junction temperature range) VREF 1.215 1.265 V over temperature range (•) 2
Reference Voltage (line/load range) VREF 1.203 1.277 V VREF≤VOUT≤(VIN-1), 2.3V≤VIN≤16V, 10mA≤IL≤IFL, TJ<TJMAX 2
Line Regulation 0.06 0.5 % IOUT=10mA, (VOUT+1V)≤VIN≤16V 2
Load Regulation 0.2 1 % VIN=VOUT + 1V, 10mA≤IOUT≤IFL (note 2) 2
Output Voltage Temperature Coefficient ΔV/ΔT 20 100 ppm/°C VOUT temp coefficient (note 6); • over temperature range 2
Dropout Voltage at IOUT=100mA (except 1.8V version) 120 300 mV Except 1.8V Version (note 3); IOUT=100mA; • over temperature range 2
Dropout Voltage at IOUT=3A (except 1.8V version) 600 800 mV Except 1.8V Version (note 3); IOUT=3A; • over temperature range 2
Ground Current 30 60 mA IOUT=1.5A; • over temperature range 2
Current Limit 3 4.5 A VOUT=0V (note 4) 2
Adjust Pin Bias Current 40 80 nA 2
Adjust Pin Bias Current (over operating junction temperature range) 120 nA over temperature range (•) 2
Input Logic Voltage Low (OFF) 0.8 V VIN<10V; • over temperature range 3
Input Logic Voltage High (ON) 2.4 V • over temperature range 3
Enable Input Pin Current 100 600 µA VEN=16V 3
Enable Input Pin Current (over operating junction temperature range) 750 µA VEN=16V; • over temperature range 3
Enable Input Pin Current 1 2 µA VEN=0.8V; max value • over temperature range 3
Regulator Output Current in Shutdown 10 500 µA Note 9: VEN ≤ 0.8V, VIN ≤ 16V, VOUT = 0; • over temperature range 3
Input Voltage VIN1 VIN1 20 V Note 1: limited duration (<100ms) and duty cycle <1%; maximum continuous supply voltage 16V 2
Storage Temperature -65 150 °C 2
Lead Temperature (Soldering, 5 sec) 260 °C Soldering, 5 sec 2
ESD Rating (HBM) 2 kV Human Body Model, all pins except EN 2
ESD Rating (HBM) EN pin 1 kV Human Body Model, En pin 2
Input Voltage Range VIN VIN 16 V Operating ratings 2
Junction Temperature Range TJ -40 125 °C Operating junction temperature range 2
Thermal Resistance Junction to Case (TO-263-3, TO-263-5) θJC 3 °C/W TO-263-3, TO-263-5 junction to case 2

CAD (KiCad official)

  • Symbol: SPX29302T5-L
  • Footprint: Package_TO_SOT_SMD:TO-263-5_TabPin6
  • 3D model: TO-263-5 (KiCad packages3D, STEP)
  • 3D model files: spx29302t5-l-etched.step / spx29302t5-l-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); spx29302t5-l.step / spx29302t5-l.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MaxLinear datasheet (10 pp, sha256 2c39cf8e9906cc98, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF