← Commit history
page.json+9−6@@ -32,31 +32,31 @@ "number": "1", "name": "EN", "type": "input",- "description": "Enable input, TTL-compatible. Drive high (>=2.4V) to enable the regulator; drive low (<=0.8V) to place the device in zero-current shutdown. Typical input current is ~20\u00b5A when active; up to 750\u00b5A at VEN=16V."+ "description": "Enable input, TTL-compatible. Drive high (>=2.4V) to enable the regulator; drive low (<=0.8V) to place the device in zero-current shutdown. Typical input current is ~20µA when active; up to 750µA at VEN=16V." }, { "number": "2", "name": "VIN", "type": "power_in",- "description": "Input supply voltage. Continuous operating range up to 16V (absolute max 20V for <100ms). A 6.8\u00b5F (min) input capacitor is recommended; a 0.1\u00b5F ceramic to GND is advised if the source has high AC impedance."+ "description": "Input supply voltage. Continuous operating range up to 16V (absolute max 20V for <100ms). A 6.8µF (min) input capacitor is recommended; a 0.1µF ceramic to GND is advised if the source has high AC impedance." }, { "number": "3", "name": "GND", "type": "power_in",- "description": "Ground reference for the regulator. Ground pin current is the quiescent current (typ. 30mA at IOUT=1.5A, ~40mA at 3A). The tab of the TO-263 is connected to GND and provides the primary thermal path (\u03b8JC = 3\u00b0C/W)."+ "description": "Ground reference for the regulator. Ground pin current is the quiescent current (typ. 30mA at IOUT=1.5A, ~40mA at 3A). The tab of the TO-263 is connected to GND and provides the primary thermal path (θJC = 3°C/W)." }, { "number": "4", "name": "VOUT", "type": "power_out",- "description": "Regulated output. Delivers up to 3A guaranteed with typical dropout of 600mV at 3A. Requires a minimum 10\u00b5F aluminum output capacitor for stability across all load conditions; requires a minimum load of 5mA."+ "description": "Regulated output. Delivers up to 3A guaranteed with typical dropout of 600mV at 3A. Requires a minimum 10µF aluminum output capacitor for stability across all load conditions; requires a minimum load of 5mA." }, { "number": "5", "name": "ADJ", "type": "input",- "description": "Adjust pin. Feedback node referenced to the internal 1.240V reference (VREF typ). Set VOUT via a resistor divider from VOUT to GND: VOUT = VREF x (1 + R1/R2). R2 recommended between 10k\u03a9 and 47k\u03a9. Adjust pin bias current is typ. 40nA (max 120nA)."+ "description": "Adjust pin. Feedback node referenced to the internal 1.240V reference (VREF typ). Set VOUT via a resistor divider from VOUT to GND: VOUT = VREF x (1 + R1/R2). R2 recommended between 10kΩ and 47kΩ. Adjust pin bias current is typ. 40nA (max 120nA)." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/spx29302t5-l-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }